Search results

1 – 5 of 5
Per page
102050
Citations:
Loading...
Access Restricted. View access options
Article
Publication date: 1 April 1985

Andrew S. Imada, Mark D. Van Slyke and Hal W. Hendrick

Despite objections to, and frustrations of, cross‐cultural research, there are commonalities, these being that assessment centre methodology is seen as a better tool for decision…

245

Abstract

Despite objections to, and frustrations of, cross‐cultural research, there are commonalities, these being that assessment centre methodology is seen as a better tool for decision making, resulting in lower staff turnover rates, involving management to a greater degree, and demonstrating to individual employees the organisation's interest in upgrading their personal skills. Assessment centre cost remains a large obstacle, but attempts to justify this cost by means of documenting gains might be helpful. In addition to the different forms of feedback from assessees the assessment centre concept needs to be more widely marketed; and supporting technologies and personnel need to be developed to sustain the concept. Cultural stereotypes (regarding managers) need to be allowed for at a regional level. Assessment centres have been found to generalise across levels, organisations and industries; they can also, from this evidence, be extended across cultures.

Details

Journal of Management Development, vol. 4 no. 4
Type: Research Article
ISSN: 0262-1711

Keywords

Access Restricted. View access options
Book part
Publication date: 11 August 2022

Yasmin Ibrahim

The socializing of hate and its saturation on platforms as a resonant and emotional connection online reveal the networked nature of convergent platforms which pump hate as a…

Abstract

The socializing of hate and its saturation on platforms as a resonant and emotional connection online reveal the networked nature of convergent platforms which pump hate as a mechanism of connection and fracture in society in the post-digital age. The violence of hate and negative sentiments online morph to appropriate a multitude of manifestations from cyberbullying and revenge porn to trolling and memes as subversive, denigrative humour. Social media, designed through an architecture for sharing and transaction, distributes hate as a popular sentiment, building connections with disparate communities through the articulation of hate for fellow humans and humanity at large. Trauma induced through hatred and bullying as an active aspect of social media platforms and interactivity distribute sentiments through its excess and disproportionality. This chapter interrogates the sentiment of hate and its workings on social media as a technology of trauma in distributing hate as a form of communion.

Details

Technologies of Trauma
Type: Book
ISBN: 978-1-80262-135-8

Available. Open Access. Open Access
Article
Publication date: 30 April 2015

Outhai KEOCHAIYOM

Laos joined ASEAN in 1997 and has practiced the Common Effective Preferential Tariff (CEPT) scheme under ASEAN Free Trade Area (AFTA) since 1998. To estimate the effects of AFTA…

506

Abstract

Laos joined ASEAN in 1997 and has practiced the Common Effective Preferential Tariff (CEPT) scheme under ASEAN Free Trade Area (AFTA) since 1998. To estimate the effects of AFTA on international trade in Laos, this paper has built a gravity model to analyze the specific effects of AFTA on aggregate international trade volume, import and export in Laos by using bilateral trade data between Laos and 29 partner countries during 2000 and 2012. Binary variables and the size of economy of AFTA are chosen to be the two variables reflecting the effect of AFTA on international trade of Laos. Results indicate that AFTA has positive effects on aggregate international trade volume and import while negative effects on export in Laos.

Details

Journal of International Logistics and Trade, vol. 13 no. 1
Type: Research Article
ISSN: 1738-2122

Keywords

Available. Open Access. Open Access
Article
Publication date: 2 January 2024

Guillermo Guerrero-Vacas, Jaime Gómez-Castillo and Oscar Rodríguez-Alabanda

Polyurethane (PUR) foam parts are traditionally manufactured using metallic molds, an unsuitable approach for prototyping purposes. Thus, rapid tooling of disposable molds using…

1571

Abstract

Purpose

Polyurethane (PUR) foam parts are traditionally manufactured using metallic molds, an unsuitable approach for prototyping purposes. Thus, rapid tooling of disposable molds using fused filament fabrication (FFF) with polylactic acid (PLA) and glycol-modified polyethylene terephthalate (PETG) is proposed as an economical, simpler and faster solution compared to traditional metallic molds or three-dimensional (3D) printing with other difficult-to-print thermoplastics, which are prone to shrinkage and delamination (acrylonitrile butadiene styrene, polypropilene-PP) or high-cost due to both material and printing equipment expenses (PEEK, polyamides or polycarbonate-PC). The purpose of this study has been to evaluate the ease of release of PUR foam on these materials in combination with release agents to facilitate the mulding/demoulding process.

Design/methodology/approach

PETG, PLA and hardenable polylactic acid (PLA 3D870) have been evaluated as mold materials in combination with aqueous and solvent-based release agents within a full design of experiments by three consecutive molding/demolding cycles.

Findings

PLA 3D870 has shown the best demoldability. A mold expressly designed to manufacture a foam cushion has been printed and the prototyping has been successfully achieved. The demolding of the part has been easier using a solvent-based release agent, meanwhile the quality has been better when using a water-based one.

Originality/value

The combination of PLA 3D870 and FFF, along with solvent-free water-based release agents, presents a compelling low-cost and eco-friendly alternative to traditional metallic molds and other 3D printing thermoplastics. This innovative approach serves as a viable option for rapid tooling in PUR foam molding.

Details

Rapid Prototyping Journal, vol. 30 no. 11
Type: Research Article
ISSN: 1355-2546

Keywords

Access Restricted. View access options
Article
Publication date: 13 March 2020

Farzana Quoquab, Jihad Mohammad and Ruzanna Shahrin

Though the concern over pro-environmental behavior is growing, there is a lack of a valid scale to measure pro-environmental behavior in nutricosmetics context. Nutricosmetics…

890

Abstract

Purpose

Though the concern over pro-environmental behavior is growing, there is a lack of a valid scale to measure pro-environmental behavior in nutricosmetics context. Nutricosmetics products are believed to boost health and fitness and thus gained worldwide popularity. Many consumers in recent days are purchasing nutricosmetics products because of its positive impact toward human health and less harm toward the environment. However, to date, there is no valid instrument to measure this construct. To fill this gap in the existing literature, this study aims to develop a valid and reliable scale to measure pro-environmental behavior in nutricosmetics purchase (PEB-NP).

Design/methodology/approach

To develop and validate the PEB-NP scale, a sequential process is followed which includes item generation, item selection, item purification and item validation. Relevant literature was reviewed and qualitative interviews were carried out to generate the items. Next, experts’ opinion was sought to select the items. Two studies were conducted (N = 150, N = 448) to explore the factor structure and to validate the scale. Exploratory factor analysis (EFA) was used to purify the scale, whereas confirmatory factor analysis (CFA) using SmartPLS (version 3) was used to validate the scale.

Findings

Based on EFA output, 14 items were retained which were then validated using CFA. The results revealed that, PEB-NP is a hierarchical multi-dimensional construct. The dimensions are “environmental aesthetics,” “conservation behavior (reduce and recycle)” and “health consciousness.” The findings from CFA confirmed the EFA results and established that pro-environmental behavior is a third-order factor model in which conservation dimension is consisted of two sub-dimensions, namely, “reduce” and “recycle” behavior.

Practical implications

The newly developed scale will enable the marketers and policymakers to segment their consumers based on this scale to better strategize the marketing efforts in fulfilling their needs. Not only this, the PEB-NP scale will benefit marketers in understanding the behavioral pattern and purchase preference of the pro-environmental consumers with regard to the nutricosmetics consumption. This research also provides suggestions for future researchers in the pro-environmental behavior and nutricosmetics fields.

Originality/value

This study is a pioneer study to develop and validate the PEB scale in the context of nutricosmetics purchase.

Details

International Journal of Pharmaceutical and Healthcare Marketing, vol. 14 no. 2
Type: Research Article
ISSN: 1750-6123

Keywords

1 – 5 of 5
Per page
102050