Search results

Analysis of fast transient flow in water pipe systems is an important issue for the prevention of unfavorable pressure oscillations and severe damage to the pipelines. This paper aims to present the performance of three-dimensional (3D) simulation of laminar water hammer caused by fast closure of valve.

The viscoelastic behavior of pipe wall is mathematically modeled by using the rheological model of Maxwell. The arbitrary Lagrangian–Eulerian (ALE) method is also used to simulate fluid–structure interaction. In this method, unlike the classical water hammer theory, the acoustic wave velocity is calculated during the numerical simulations and therefore it is not predetermined.

Investigating the velocity profiles and the shear stress diagrams for transient flow in elastic pipe showed that the strong effect of viscous forces on the near wall region in conjunction with the influence of inertial forces in the central region of the pipe leads to creation of reverse flow near the pipe wall. Comparing the numerical results obtained for elastic pipe with those of viscoelastic pipe revealed that during transient condition, the viscoelastic wall absorbs the energy of fluid and therefore pressure fluctuations of viscoelastic pipe are damped more quickly. Moreover, the 3D simulation of water hammer confirmed the plane wave hypothesis of water hammer.

The 3D Navier–Stokes equations are solved considering the viscoelasticity of the pipe and the ALE method using the software package of COMSOL Multiphysics.

Regenerative flow pump (RFP) is a rotodynamic turbomachine capable of developing high pressure rise at low flow rates. This paper aims to numerically investigate the performance of a regenerative pump considering the modification in blade and casing geometry.

The radial blade shape was changed to the bucket form and a core is added to flow path. A parametric study was performed to improve the performance of the pump. Thus, the effect of change in blade angle, chord, height, pitch to chord ratio and also inlet port on the performance of RFP was investigated.

Results showed that the modified blade angle to achieve the maximum efficiency is about 41 degree. Also, the most efficient point occurs close to pitch/chord = 0.4 and by reducing the axial chord, efficiency of the pump increases. It was found that better efficiency will be achieved by increasing the “Arc of admission”, but there are limitations of manufacturing. It was observed that the performance curves shifted towards lower flow coefficients by reducing height of blades.

To improve the characteristics of regenerative pump, the blade shape changed to the bucket form (airfoil blades with identical inlet and outlet angle) and a core is added to flow path. A parametric study has been accomplished to see the influence of some important parameters on the performance of the pump.