Cezary Galinski, Grzegorz Krysztofiak, Marek Miller, Pawel Ruchala, Marek Kalski, Mateusz Lis, Adam Dziubinski, Krzysztof Bogdanski, Lukasz Stefanek and Jaroslaw Hajduk
The purpose of this paper is to present the methodology and approach adapted to conduct a wind tunnel experiment on the inverted joined-wing airplane flying model together with…
Abstract
Purpose
The purpose of this paper is to present the methodology and approach adapted to conduct a wind tunnel experiment on the inverted joined-wing airplane flying model together with the results obtained.
Design/methodology/approach
General assumptions underlying the dual-use model design are presented in this paper. The model was supposed to be used for both wind tunnel tests and flight tests that significantly drive its size and internal structure. Wind tunnel tests results compared with the outcome of computational fluid dynamics (CFD) were used to assess airplane flying qualities before the maiden flight was performed.
Findings
Extensive data about the aerodynamic characteristics of the airplane were collected. Clean configurations in symmetric and asymmetric cases and also configurations with various control surface deflections were tested.
Practical implications
The data obtained experimentally made it possible to predict the performance and stability properties of the unconventional airplane and to draw conclusions on improvements in further designs of this configuration.
Originality/value
The airplane described in this paper differs from frequently analyzed joined-wing configurations, as it boasts a front lifting surface attached at the top of the fuselage, whereas the aft one is attached at the bottom. The testing technique involving the application of a dual-use model is also innovative.
Details
Keywords
Aleksander Olejnik, Adam Dziubiński and Łukasz Kiszkowiak
The purpose of this paper is to simulate with in-depth reconstruction of existing geometry a process of cooling of the aircraft engine in pusher configuration, which is more…
Abstract
Purpose
The purpose of this paper is to simulate with in-depth reconstruction of existing geometry a process of cooling of the aircraft engine in pusher configuration, which is more problematic than usually used, tractor configuration. Moreover, a complex thermal and fluid flow analysis is necessary to verify that an adequate cooling is ensured and that temperatures in the engine nacelle are maintained within the operating limits.
Design/methodology/approach
Methodology used in this research is based on computational fluid dynamics tools to model adequately the internal and the external flow, to find the state of cooling system and research the results of baffles modification inside the engine cover. Additionally, two types of the cover with different sizes of inlets and outlets are tested.
Findings
The results showed the influence of baffles modifications and changes in inlets and outlet sizes on the mass flow rate and temperature distributions inside the engine nacelle. The best configuration of air inlets and outlets was determined.
Practical implications
The method used in the research is the safest method in testing of such cases, provided the proper approach in modeling is taken. The collaboration of internal and external flow is crucial and should not be replaced with assumed flow rate through inlet and outlet area. The obtained results will help in future studies on cooling systems of engines in pusher configuration.
Originality/value
The work presents original results obtained by the authors during a complex fluid flow and heat transmission analysis and is a part of the design project of the OSA patrol aircraft.
Details
Keywords
Aleksander Olejnik, Adam Dziubiński and Łukasz Kiszkowiak
This study aims to create 6-degree of freedom (SDOF) for computational fluid dynamics (CFD) simulations of body movement, and to validate using the experimental data for empty…
Abstract
Purpose
This study aims to create 6-degree of freedom (SDOF) for computational fluid dynamics (CFD) simulations of body movement, and to validate using the experimental data for empty tank separation from I-22 Iryda jet trainer. The procedure has an ability to be modified or extended, to simulate, for example, a sequential release from the joints.
Design/methodology/approach
A set of CFD simulations are calculated. Both the SDOF procedure and the CFD simulation settings are validated using the wind tunnel data available for the aircraft.
Findings
The simulation using designed procedure gives predictable results, but offers availability to be modified to represent external forces, i.e. from body interaction or control system without necessity to model the control surfaces.
Practical implications
The procedure could be used to model the separation of external stores and design the deployment of anti-radar chaff, flares or ejection seats.
Originality/value
The work presents original work, caused by insufficient abilities of original SDOF procedure in ANSYS code. Additional value is the ability of the procedure to be easily modified.
Details
Keywords
Aleksander Olejnik, Piotr Zalewski, Łukasz Kiszkowiak, Robert Rogólski, Adam Dziubiński, Michał Frant, Maciej Majcher and Łukasz Omen
The purpose of this study was to analyze the possibility of using combat aircraft including decommissioned as a platform for launching and carrying space rockets with satellites…
Abstract
Purpose
The purpose of this study was to analyze the possibility of using combat aircraft including decommissioned as a platform for launching and carrying space rockets with satellites (nano and microsatellites). Thus, an airborne-launcher-to-space-system may be attractive to countries without ground-based space rocket launch sites.
Design/methodology/approach
For considered launch-to-orbit system configurations, simulations of space rocket effects on aerodynamic characteristics were performed using computational fluid dynamics (CFD ANSYS Fluent) methods. In addition, experimental studies were performed in a wind tunnel to verify the numerical simulations. Discrete models of the aircraft structure were developed for analysis using finite element method (FEM). The analysis of simulated structural properties of the models was carried out to test its stiffness and mass characteristics important for solving the static and dynamic problems of the structure. The validation analyses of aircraft models were based on mass distribution estimation and matching the stiffness properties of the individual airframe structural assemblies.
Findings
The results of numerical analyses and tunnel tests indicate that the influence of carrier rockets on the change of aerodynamic and strength characteristics of the airframe is rather negligible. The aircraft can be used as launching platforms for space rockets. Simulations have indicated that the aircraft will successfully perform a mission of taking away and launching a rocket of at least about 1,000 kg total weight with a 10 kg space payload included.
Practical implications
The combat aircraft can be used as launch platforms for space rockets, and the air/rocket set can become the equivalent of responsive space assets for countries with small space budgets.
Originality/value
The work presents original results obtained by the authors during a preliminary design of a low-cost satellite launch system consisting of a carrier aircraft and a space rocket orbiter. The possibility of using decommissioned combat aircraft as air-launch-to-orbit platforms was taken into consideration. In the absence of aircraft design documentation, reverse engineering methods and techniques were used to develop aircraft geometry and airframe strength structure. Use of CFD, FEM and simulation methods to evaluate system capabilities was demonstrated. Numerical results from CFD simulations were finally verified in experimental tests.
Details
Keywords
Piotr Łapka, Mirosław Seredyński, Piotr Furmański, Adam Dziubiński and Jerzy Banaszek
The purpose of this study is to developed a simplified thermo-fluid model of an engine cowling in a small airplane. An aircraft engine system is composed of different elements…
Abstract
Purpose
The purpose of this study is to developed a simplified thermo-fluid model of an engine cowling in a small airplane. An aircraft engine system is composed of different elements operating at various temperatures and in conjunction with the composite nacelle creates a region with high intensity of heat transfer to be covered by the cooling/ventilation systems. Therefore a thermal analysis, accounting for the complex heat transfer modes, is necessary in order to verify that an adequate cooling is ensured and that temperatures of the nacelle are maintained within the operating limits throughout the whole aircraft's flight.
Design/methodology/approach
Simplified numerical simulations of conductive, convective and radiative heat transfer in the engine bay of the small airplane I-23 in a tractor arrangement were performed for different air inlet and outlet configurations and for varying conditions existing in air inlets during the flight. The model is based on the control volume approach for heat and fluid flow as well as for thermal radiation and on k-ɛ turbulence model.
Findings
The flow and temperature distributions inside the cowling were determined, and high-temperature spots on the internal side of the nacelle and on other airplane systems located close to the turboprop engine and the exhaust system were found. The thermal radiation was found to play the key role in heat transfer inside the engine bay. The optimal configuration of air inlets and outlets was determined.
Practical implications
The obtained results will help in future studies on ventilation and cooling systems and will contribute to the selection of materials for parts of the engine bay and the nacelle as well as in developing solutions for reducing the temperature inside the cowling of the airplane I-23.
Originality/value
A complete simplified thermo-fluid model of heat transfer inside the engine bay of the airplane I-23 was developed. Additionally, influence of the thermal radiation on temperature distribution at the nacelle was investigated.