Search results

While several existing panel studies have focused on the linear specifications of the nexus between trade openness and unemployment, nonlinear panel studies on this subject remain less explored. This paper examines the asymmetric nexus between trade openness and unemployment in 34 selected sub-Saharan Africa (SSA) countries for the period spanning from 1991 to 2020.

The Pedroni and Westerlund panel cointegration tests were conducted to ascertain a long run relationship among the studied variables, while the panel nonlinear autoregressive distributed lag approach was applied to account for asymmetries.

The study revealed among other things that trade openness asymmetrically influences unemployment in the selected panel of SSA countries. In the long run, the positive shock in trade openness on unemployment is greater as compared to the negative shock.

The implications of this study include the need to (1) ensure the effective monitoring and supervision of trade flows in the sub-region so that their full benefits are maximized in terms of job creation and (2) ensure that a positive trade balance is maintained in the selected SSA countries.

The positive and negative shocks in trade openness are examined to determine their asymmetric effects on unemployment.

This study aims to fabricate multiwalled carbon nanotubes (MWCNTs)-mediated polyvinyl alcohol (PVA) composite films using the solution casting approach.

The prepared films were evaluated for diverse structural, surface, optical and electrical attributes using advanced analytical techniques, i.e. electron microscopy for surface morphology, Fourier transform infrared spectroscopy for tracing chemical functionalities, x-ray diffraction (XRD) for crystal patterns, water contact angle (WCA) analysis for surface wettability and UV visible spectroscopy for optical absorption parameters. The specimens were also investigated for certain rheological, mechanical and electrical properties, where applicable.

The surface morphology results expressed a better dispersion of MWCNTs in the resultant PVA-based nanocomposite film. The XRD analysis exhibited that the nanocomposite film was crystalline. The surface wettability analysis indicated that with the inclusion of MWCNTs, the WCA of the resultant nanocomposite film improved to 89.4° from 44° with the pristine PVA film. The MWCNTs (1.00%, w/w) incorporated PVA-based film exhibited a tensile strength of 54.0 MPa as compared to that of native PVA as 25.3 MPa film. There observed a decreased bandgap (from 5.25 to 5.14 eV) on incorporating the MWCNTs in the PVA-based nanocomposite film.

The MWCNTs’ inclusion in the PVA matrix could enhance the AC conductivity of the resultant nanocomposite film. The prepared nanocomposite film might be useful in designing certain optoelectronic devices.

The results demonstrated the successful MWCNTs mediation in the PVA-based composite films expressed good intercalation of the precursors; this resulted in decreased bandgap, usually, desirable for optoelectronic applications.

This study investigates the impact of total health expenditure on life expectancy in a panel of 43 African countries from 2000 to 2018.

The dynamic panel generalized method of moments (GMM) estimation method developed by Arellano and Bond (1991) is used in this study. This approach generates estimates that are heteroskedasticity and autocorrelation consistent, as well as controls for unobserved time-invariant country-specific effects and eliminates any endogeneity in the panel model.

The results reveal that health expenditure on its own has a positive significant influence on life expectancy. However, health expenditure via the moderating effect of government effectiveness reduces life expectancy. The authors also observe that school enrollment and the level of economic activity significantly drive life expectancy.

The study is limited to 43 out of 54 African countries, and it covers a period of 18 years: 2000 to 2018.

The authors argue that larger health expenditure will aid in improving the life expectancy rate in Africa. However, in practice, this would be difficult given the needs of other priority sectors.

Since most developing countries' health expenditures are small, a policy option is that healthcare services should be subsidized such that the poorest people can also access them.

The study differs from the previous attempts, and with this, the authors contribute significantly to the literature. First, to the best of the authors’ knowledge, the authors are unaware of any study considering the role of government effectiveness as a moderating factor in investigating the effect of health expenditure on life expectancy in the African context. Thus, the authors fill a yawning gap in the literature. Second, the authors employ a recent dataset with larger sample size. Finally, to address the problem of endogeneity and simultaneity bias, the authors use the system GMM technique.

As global warming intensifies, climatic conditions are changing dramatically, potentially affecting specific businesses and cities’ livability. The temperature increase in cities significantly affects urban residents whose percentage is to reach about 70% by 2050. This paper aimed at highlighting the climate change risks in cities, particularly focusing on the threats to people’s health due to a continuous temperature increase.

This study was conducted in three main steps. First, the literature review on the effects of climate change, particularly on the continuous temperature rise in cities, was conducted based on the publications retrieved from PubMed, Science Direct, Google Scholar and Research Gate. Second, the survey was conducted for the sample cities for one month. Third, the questionnaire was used to assess possible climate change threats to the livability of cities.

The findings showed that urban areas are usually warmer than the surrounding rural areas, mainly due to the urban heat island effect, causing more hot days in metropolitan areas compared to rural areas. This paper outlines some mitigation and adaptation measures, which can be implemented to improve the livability in cities, their sustainability and the well-being of their populations.

This study reports on the climate change impacts on the health and livability of 15 cities, in industrialized and developing countries. It examines the average and maximum temperature and relative humidity of each city and its correlation with their livability. It was complemented by a survey focused on 109 cities from Africa, Asia, Europe, Latin America, North America and Oceania.

The purpose of this paper is to investigate the determinants of the affordable housing shortage in the Greater Kuala Lumpur from the suppliers’ perspectives.

Primary data were collected through a cross-sectional survey questionnaire comprising 21 determinants and 111 experts in the housing industry.

The affordable housing shortages are consequences of regulations and policies on land allocations, building materials and the affordable housing market. The government should provide more lands to the developers or the government should directly build affordable housing on their lands. To lower the cost of construction, the government should reduce the importation tax and procedures, and the housing industry should find alternative building materials.

Theoretically, the research provided fresh insights into the causes of housing shortages and reasons for the increase in housing prices. The results will be useful to policymakers towards affordable housing delivery and to the developers and contractors on measures to increase profit margins and increase housing supply.

Even though copper–tungsten has shown signs of potentials, relatively little is currently known about its appropriateness for photovoltaic application. This paper aims to evaluate the suitability of copper-tungs oxides as photovoltaic absorbers while investigating the consequences of oxygen content variation.

Using profilometry, Hall measurements, Seebeck test and spectrophotometry, grown samples were defined. Samples of 5 standard cubic centimeters per minute (sccm) and 7 sccm exhibited appropriate characteristics and were further tested using personal computer one dimension (PC1D) computational simulation at the system stage. To grow materials with an average thickness below 0.45 µm, magnetron co-sputtering was used. Three sample sets, varied by oxygen flow rate, were made with flow rates of 5sccm, 7sccm and 9sccm, respectively.

Some samples proved to be effective absorbers, using a cadmium telluride device as the criterion of output calculation, with one sample chosen as ideal for each type of flow rate. For the chosen samples, an optimum thickness was also obtained, i. It was discovered that thinner cells, optimal for both groups with 0.6 µm, performed better to than other thicknesses.

The material also demonstrated prospects for applications in window layers, but more needs to be known.

Thin film material properties and their operating processes are relatively complex, so it is important to find simple and cost-effective ways to forecast performance. While relatively new, numerical modeling has proven to be very useful in defining the critical properties of thin film devices, thereby helpful for predictions of performance. Solar cell capacitance simulator one dimension, amorphous semiconductor analysis, personal computer one dimension (PC1D), analysis of micro-electronic and photonic structures and automat for simulation for heterostructures (33) are several common models in the thin film industry. Due to its availability and relative ease of use, PC1D was used in this project.

As the search for the balance among performance, cost, reliability and availability continue, more absorber components continue to evolve, notably from the chalcogenides. Because of their ability to absorb light, ternary transition metal chalcogenides are useful in the production of hydrogen and in the energy storage sector, as well as in the production of light-emitting diodes and solar photovoltaic (PV).

There are several methods for the manufacture of copper–tungsten alloys, but the process of combinatorial sputtering of magnetrons provides satisfactory results even for the manufacture of various other materials. Cu₂WSe₄, an excellent alternative to sputtering, is one of the very few copper–tungsten selenide materials tested, synthesized by hot simple injection to have strong crystallinity and lacks impurity. The optical properties of colloidal Cu₂WSe₄ show that Schottky diode–like behaviors are present in the material, suggesting its potential for use in solar cells. Cu-W alloys could have a lot more to give the PV industry, by all indications. Further exploration of the oxides by this work is thus justified. Transparent conducting oxides, interfacial layers or charge-transporting compounds are commonly used as transition metal oxides. Nevertheless, as absorbers, metal oxides such as BiFeO₃ and the traditionally highly studied Cu₂O have been tested, with Cu₂O showing a conversion efficiency of up to 10% under particular conditions. This displays strong electronic and optical properties, so there might be some possibility of studying other PV absorption metal oxides. The optical properties of colloidal Cu₂WSe₄ show that Schottky diode–like behaviors are present in the material, suggesting its potential for use in solar cells.

Facilities management (FM) plays a key role in the performance of businesses to ensure the comfort of users and the sustainable use of natural resources over operation and maintenance. Nevertheless, reactive maintenance (RM) services are characterised by delays, waste and difficulties in prioritising services and identifying the root causes of failures; this is mostly caused by inefficient asset information and communication management. While linking building information modelling and the Internet of Things through a digital twin has demonstrated potential for improving FM practices, there is a lack of evidence regarding the process requirements involved in their implementation. This paper aims to address this challenge, as it is the first to statistically characterise RM services and processes to identify the most critical RM problems and scenarios for digital twin implementation. The statistical data analytics approach also constitutes a novel practical approach for a holistic analysis of RM occurrences.

The research strategy was based on multiple case studies, which adopted university campuses as objects for investigation. A detailed literature review of work to date and documental analysis assisted in generating data on the FM sector and RM services, where qualitative and statistical analyses were applied to approximately 300,000 individual work requests.

The work provides substantial evidence of a series of patterns across both cases that were not evidenced prior to this study: a concentration of requests within main campuses; a balanced distribution of requests per building, mechanical and electrical service categories; a predominance of low priority level services; a low rate of compliance in attending priority services; a cumulative impact on the overall picture of five problem subcategories (i.e. Building-Door, Mechanical-Plumbing, Electrical-Lighting, Mechanical-Heat/Cool/Ventilation and Electrical-Power); a predominance of problems in student accommodation facilities, circulations and offices; and a concentration of requests related to unlisted buildings. These new patterns form the basis for business cases where maintenance services and FM sectors can benefit from digital twins. It also provides a new methodological approach for assessing the impact of RM on businesses.

The findings provide new insights for owners and FM staff in determining the criticality of RM services, justifying investments and planning the digital transformation of services for a smarter provision.

This study represents a unique approach to FM and provides detailed evidence to identify novel RM patterns of critical service provision and activities within organisations for efficient digitalised data management over a building’s lifecycle.

There have been claims of inadequate maintenance practice in Tanzania’s higher learning institutions (HLIs), primarily due to the traditional conventional approach where maintenance is only addressed during the usage stage. This study aimed to investigate whether universities and colleges are adopting a holistic approach to maintenance, where it is considered from the inception stage.

Structured questionnaires and semi-structured interviews were employed to gather quantitative and qualitative data, respectively. Through purposive sampling, 11 estate managers were selected, with eight of them responding to questionnaires. A comprehensive literature review was also conducted. Quantitative data were analyzed using the Statistical Package for Social Sciences (IBM SPSSTM) Version 20.0, while qualitative data were examined using Nvivo 12 Plus and in-depth analysis.

The study revealed that, maintenance in HLIs is only marginally considered in a holistic manner. In cases where it is “considered,” this is often by default rather than by design. This has led to maintenance challenges, such as the accelerated deterioration of components, the incompatibility of new maintenance materials with the old ones and difficulties in adapting spaces to meet emerging user requirements. The most frequently occurring words in the word cloud, “considered” and “maintenance”, underscore the necessity of adopting a holistic approach to maintenance management.

The study was confined to HLIs in the Dar es Salaam region.

The findings from this study offer valuable insights for maintenance experts implementing holistic approaches in Tanzanian universities and colleges. Top management should focus on proper planning (including maintenance plans and budgets) and decision-making regarding maintenance management. Additionally, the Government of Tanzania may consider implementing policies requiring designing teams to adopt a holistic approach to maintenance before approving building permits.

To the best of the authors’ knowledge, this is the first study to examine whether universities and colleges consider maintenance from a holistic perspective.

There have been complaints and criticisms of the conditions and performance of university buildings in Malaysia. The purpose of this paper is to report research looking into building maintenance practices in Malaysia.

To achieve its objectives, the research combined a literature review and a case study. The case study aimed to provide a details and factual information on the maintenance procedures of a university.

It was found that the maintenance procedures on the case studied were corrective and budget driven. It was also found that the university favours out‐sourcing to in‐sourcing their maintenance service.

The findings of this study are based on a case, therefore the findings may not represent the maintenance practices of other public universities in Malaysia or elsewhere.

Some universities may adopt some of the good maintenance practices of the university studied. Some of the observations could be helpful to other universities striving to achieve best maintenance practices.

The paper is able to expose the weakness in university maintenance practices in Malaysia and outlines some positive attributes.

Defect management is an important segment in building maintenance management. Although defect management requires systemic approach, the purpose of this paper is to focus on the measurement of defects in university buildings based on user perspective.

The paper reviews related literature and presents the outcome of a survey of 550 university buildings users, derived from a convenience sample from five universities.

A total of 20 defects were found to be very critical to the building users. Faulty electrical systems, faulty air conditioning system and roof damages were the defects requiring urgent maintenance. Based on the findings, it was concluded that resources be directed towards defects that affect security, safety and comfort.

The list of 32 defects may not be exhaustive, but are indicative of defects that affect university building performance. Because the buildings are not prototypes, some of the findings required adaptation. The conclusions were based on data from five universities.

This study is useful to maintenance organizations in efforts to increase users’ satisfaction, productivity and building performance by guiding resources allocation and at the same time reducing rework, dissatisfaction and waste. The findings would provide feedback and feed forward information and knowledge to the design and construction teams. The study provides a platform to integrate maintenance issues into the design and construction phases of building projects.

There is no such conclusive study on the maintenance of university buildings. Both academics and practitioners can apply the findings to their respective maintenance management scenarios.