Search results

The purpose of this paper is to analyze heat and mass transport mechanism of unsteady MHD thin film flow of aluminium–copper/water hybrid nanofluid influenced by thermophoresis, Brownian motion and radiation.

The authors initially altered the time dependent set of mathematical equations into dimensionless form of equations by using apposite transmutations. These equations are further solved numerically by deploying Runge–Kutta method along with shooting technique.

Plots and tables for skin friction coefficient, Nusselt number, Sherwood number along with velocity, temperature and concentration profiles against pertinent non-dimensional parameters are revealed. The study imparts that aluminium–copper hybrid nanoparticles facilitate higher heat transfer rate compared to mono nanoparticles. It is noteworthy to disclose that an uplift in thermophoresis and Brownian parameter depreciates heat transfer rate, while concentration profiles boost with an increase in thermophoretic parameter.

The current study targets to investigate heat transfer characteristics of an unsteady thin film radiative flow of water-based aluminium and copper hybrid nanofluid. The high thermal and electrical conductivities, low density and corrosion resistant features of aluminium and copper with their wide range of industrial applications like power generation, telecommunication, automobile manufacturing, mordants in leather tanning, etc., have prompted us to instil these particles in the present study.

The present study has many practical implications in the industrial and manufacturing processes working on the phenomena like heat transfer, magnetohydrodynamics, thermal radiation, nanofluids, hybrid nanofluids with special reference to aluminium and copper particles.

To the best extent of the authors’ belief so far no attempt is made to inspect the flow, thermal and mass transfer of water-based hybridized aluminium and copper nanoparticles with Brownian motion and thermophoresis.

This paper aims to study the impacts of viscous dissipation, thermal radiation and Joule heating on squeezing flow current and the heat transfer mechanism for a magnetohydrodynamic (MHD) nanofluid flow in parallel disks during a suction/blowing process.

First, the governing momentum/energy equations are transformed into a non-dimensional form and then the obtained equations are solved by modified Adomian decomposition method (ADM), known as Duan–Rach approach (DRA).

The effect of the radiation parameter, suction/blowing parameter, magnetic parameter, squeezing number and nanoparticles concentration on the heat transfer and flow field are investigated in the results. The results show that the fluid velocity increases with increasing suction parameter, while the temperature profile decreases with increasing suction parameter.

A complete analysis of the MHD fluid squeezed between two parallel disks by considering Joule heating, thermal radiation and adding different nanoparticles using the novel method called DRA is addressed.

The purpose of this study is to peruse natural convection in a CuO-water nanofluid-filled complex-shaped enclosure under the influence of a uniform magnetic field by using control volume finite element method.

Governing equations formulated in dimensionless stream function, vorticity and temperature variables using the single-phase nanofluid model with the Koo–Kleinstreuer–Li correlation for the effective dynamic viscosity and the effective thermal conductivity have been solved numerically by control volume finite element method.

Effects of various pertinent parameters such as Rayleigh number, Hartmann number, volume fraction of nanofluid and shape factor of nanoparticle on the convective heat transfer characteristics are analysed. It was observed that local and average heat transfer rates increase for higher value of Rayleigh number and lower value of Hartmann number. Among various nanoparticle shapes, platelets were found to be best in terms of heat transfer performance. The amount of average Nusselt number reductions was found to be different when nanofluids with different solid particle volume fractions were considered due to thermal and electrical conductivity enhancement of fluid with nanoparticle addition.

A comprehensive study of the natural convection in a CuO-water nanofluid-filled complex-shaped enclosure under the influence of a uniform magnetic field by using control volume finite element method is addressed.

The purpose of this research is to describe the importance of the Cattaneo–Christov theory of heat conduction in a triangular enclosure with a semi-circular heater. Analysis subjected to Fe₃O₄-H₂O nanofluid is reported. Viscosity dependent on magnetic field is taken into consideration to simulate ferrofluid viscosity. Besides, heat generation and shape factor of nanoparticles are also considered.

The well-known control volume finite element method is used for simulations.

The outcomes reveal that the magnetic field can be introduced to the system as a controlling element.

No such analysis exists in the literature.

The purpose of this paper is to focus on the influence of multiple slips on MHD Williamson nanofluid flow embedded in porous medium towards a linearly stretching sheet that has been investigated numerically. The whole analysis has been carried out considering the presence of nth-order chemical reaction between base fluid and nanoparticles.

A similarity transformation technique has been adopted to convert non-linear governing partial differential equations into ordinary ones and then they are solved by using both the RK-4 method and Laplace transform homotopy perturbation method. The consequences of multiple slip parameters on dimensionless velocity, temperature and concentration and heat and mass transfer rates have been demonstrated using tabular and graphical outline.

The investigation explores that the Nusselt number reduces for escalating behaviour of velocity slip and thermal slip parameter. Fluid’s temperature rises in the presence of generative reaction parameter.

A fine conformity of the current results has been achieved after comparing with previous literature studies. Considering destructive chemical reaction, reduced Nusselt number is found to decrease, but reverse consequence has been noticed in the case of generative chemical reaction. Mass transport diminishes when the order of chemical reaction amplifies for both destructive and generative reactions.

Natural convection heat transfer analysis can be completed using entropy generation analysis. This study aims to accomplish both the natural convection heat transfer and entropy generation analyses for a hexagonal cavity loaded with Cu-H2O nanoliquid subjected to an oriented magnetic field.

Control volume-based finite element method is applied to solve the non-dimensional forms of governing equations and then, the entropy generation number is computed.

The results portray that both the average Nusselt and entropy generation numbers boost with increasing aspect ratio for each value of the undulation number, while both of them decrease with increasing the undulation number for each amplitude parameter. There is a maximum value for the entropy generation number at a specified value of Hartmann number. Also, there is a minimum value for the entropy generation number at a specified value of angle of the magnetic field. When the volume fraction of nanoparticles grows, the average Nusselt number increases and the entropy generation number declines. The entropy generation number attains to a maximum value at Ha = 14 for each value of aspect ratio. The average Nusselt number ascends 2.9 per cent and entropy generation number decreases 1.3 per cent for Ha = 0 when ϕ increases from 0 to 4 per cent.

A hexagonal enclosure (complex geometry), which has many industrial applications, is chosen in this study. Not only the characteristics of heat transfer are investigated but also entropy generation analysis is performed in this study. The ecological coefficient of performance for enclosures is calculated, too.

The purpose of this study is to elaborate mixed convection impact in stratified nanofluid flow by convectively heated moving surface. Rheological relations of second-grade fluid are used for formulation. Magnetic field, heat absorption/generation and convective conditions are considered for modeling.

Convergent solutions are achieved using homotopy procedure.

The authors found opposing behavior for radiation and thermal stratification variables against thermal field.

No such analysis has yet been reported.

The purpose of this study is to investigate free convection of copper-water nanofluid in an upper half of circular horizontal cylinder with a local triangular heater under the effects of uniform magnetic field and cold cylinder shell using control volume finite element method (CVFEM).

Governing equations formulated in dimensionless stream function, vorticity and temperature variables using the single-phase nanofluid model with Brinkman correlation for the effective dynamic viscosity and Hamilton and Crosser model for the effective thermal conductivity have been solved numerically by CVFEM.

The impacts of control parameters such as the Rayleigh number, Hartmann number, nanoparticles volume fraction, local triangular heater size, shape factor on streamlines and isotherms as well as local and average Nusselt numbers have been examined. The outcomes indicate that the average Nusselt number is an increasing function of the Rayleigh number, shape factor and nanoparticles volume fraction, while it is a decreasing function of the Hartmann number.

A complete study of the free convection of copper-water nanofluid in an upper half of circular horizontal cylinder with a local triangular heater under the effects of uniform magnetic field and cold cylinder shell using CVFEM is addressed.

The purpose of this study is to analyze the Entropy generation analysis and heat transport in three-dimensional flow between two stretchable disks. Joule heating and heat generation/absorption are incorporated in the thermal equation. Thermo-diffusion effect is also considered. Flow is conducting for time-dependent applied magnetic field. Induced magnetic field is not taken into consideration. Velocity and thermal slip conditions at both the disks are implemented. The flow problem is modeled by using Navier–Stokes equations with entropy generation rate and Bejan number.

Von Karman transformations are used to reduce the nonlinear governing expressions into an ordinary one and then tackled by homotopy analysis method for convergent series solutions. The nonlinear expressions for total entropy generation rate are obtained with appropriate transformations. The impacts of different flow variables on velocity, temperature, entropy generation rate and Bejan number are described graphically. Velocity, temperature and concentration gradients are discussed in the presence of flow variables.

Axial, radial and tangential velocity profiles show decreasing trend for larger values of velocity slip parameters. For a larger Brinkman number, the entropy generation increases, while a decreasing trend is noticed for Bejan number.

To the best of the authors’ knowledge, no such analyses have been reported in the literature.

This paper aims to focus on the steady state flow of nanoliquid through microchannel with the aid of internal heat source and different shapes of nanoparticle. The influence of MoS₂ and TiO₂ particles of nano size on flow and thermal fields is examined. The governing equations are modelled and then solved numerically. The obtained physical model is nondimensionalized using dimensionless quantities. The nondimensional equations are treated with numerical scheme. The outcome of the current work is presented graphically. Diverse substantial quantities such as entropy generation, Bejan number and Nusselt number for distinct parameters are depicted through graphs. The result established that nanoparticle of blade shape acquires larger thermal conductivity. Entropy analysis is carried out to explore the impact of various parameters such as nanoparticle volume fraction, magnetic parameter, radiation parameter and heat source parameter.

The resultant boundary value problem is converted into initial value problem using shooting scheme. Then the flow model is resolved using Runge-Kutta-Fehlberg-Fourth-Fifth order technique.

It is emphasized that entropy generation for the fluid satisfies N(ζ)_{(TiO2−water)} > N(ζ)_{(MoS2−water)}. In addition to this, it is emphasized that N(ζ)_sphere > N(ζ)_brick > N(ζ)_cylinder > N(ζ)_platelet > N(ζ)_blade. Also, it is obtained that blade-shaped nanoparticle has higher thermal conductivity for both MoS₂ and TiO₂.

Shape effects on Molybdenum disulphide and TiO₂ nanoparticle in a microchannel with heat source is examined. The analysis of entropy shows that N(ζ)_{(TiO2−water)} > N(ζ)_{(MoS2−water)}.