A.M. Blokhin and R.S. Bushmanov
The purpose of this paper is to reply to the following question: do there exist piecewise smooth solutions to the 2D MEP hydrodynamical model of charge transport in semiconductors…
Abstract
Purpose
The purpose of this paper is to reply to the following question: do there exist piecewise smooth solutions to the 2D MEP hydrodynamical model of charge transport in semiconductors with smooth parts separated by a surface of strong discontinuity?
Design/methodology/approach
A standard approach is used to obtain jump conditions for the balance equations under consideration.
Findings
For the balance equations of charge transport in semiconductors based on the maximum entropy principle Rankine‐Hugoniot jump conditions were derived and studied. Considering the important case of planar discontinuity, the authors discuss the legitimacy of the introduction of surface charge and surface current in the Rankine‐Hugoniot jump conditions.
Research limitations/implications
The jump conditions are derived for the balance equations written for the case of the parabolic approximation of energy bands. However, it is possible also to perform the analysis of corresponding jump conditions for the case of Kane dispersion relation approximation.
Originality/value
The paper presents derivation and study of Rankine‐Hugoniot jump conditions for the 2D MEP hydrodynamical model of charge transport in semiconductors.
Details
Keywords
A.M. Blokhin and A.A. Iohrdanidy
A mathematical gas dynamic model for semiconductor devices is numerically analysed. The well‐known ballistic diode problem is taken as an example.
Abstract
A mathematical gas dynamic model for semiconductor devices is numerically analysed. The well‐known ballistic diode problem is taken as an example.
Details
Keywords
S. Askari, M.H. Shojaeefard and K. Goudarzi
The purpose of this paper is to carry out a comprehensive study of compressible flow over double wedge and biconvex airfoils using computational fluid dynamics (CFD) and three…
Abstract
Purpose
The purpose of this paper is to carry out a comprehensive study of compressible flow over double wedge and biconvex airfoils using computational fluid dynamics (CFD) and three analytical models including shock and expansion wave theory, Busemann's second‐order linearized approximation and characteristic method (CHM).
Design/methodology/approach
Flow over double‐wedge and biconvex airfoils was investigated by the CFD technique using the Spalart‐Allmaras turbulence model for computation of the Reynolds stresses. Flow was considered compressible, two dimensional and steady. The no slip condition was applied at walls and the Sutherland law was used to calculate molecular viscosity as a function of static temperature. First‐order upwind discretization scheme was used for the convection terms. Finite‐volume method was used for the entire solution domain meshed by quadratic computational cells. Busemann's theory, shock and expansion wave technique and CHM were the analytical methods used in this work.
Findings
Static pressure, static temperature and aerodynamic coefficients of the airfoils were calculated at various angles of attack. In addition, aerodynamic coefficients of the double‐wedge airfoil were obtained at various free stream Mach numbers and thickness ratios of the airfoil. Static pressure and aerodynamic coefficients obtained from the analytical and numerical methods were in excellent agreement with average error of 1.62 percent. Variation of the static pressure normal to the walls was negligible in the numerical simulation as well as the analytical solutions. Analytical static temperature far from the walls was consistent with the numerical values with average error of 3.40 percent. However, it was not comparable to the numerical temperature at the solid walls. Therefore, analytical solutions give accurate prediction of the static pressure and the aerodynamic coefficients, however, for the static temperature; they are only reliable far from the solid surfaces. Accuracy of the analytical aerodynamic coefficients is because of accurate prediction of the static pressure which is not considerably influenced by the boundary layer. Discrepancies between analytical and numerical temperatures near the walls are because of dependency of temperature on the boundary layer and viscous heating. Low‐speed flow near walls causes transformation of the kinetic energy of the free stream into enthalpy that leads to high temperature on the solid walls; which is neglected in the analytical solutions.
Originality/value
This paper is useful for researchers in the area of external compressible flows. This work is original.
Details
Keywords
Maksim Blokhin, Natalia Zarubina, Pavel Mikhailik, Evgeniy Elovskiy, Yulia Ivanova, Francisco Javier González and Luis Somoza
This study aims to present the results of inductively coupled plasma mass spectrometry (ICP-MS) determination of economically significant metals including rare-earth elements and…
Abstract
Purpose
This study aims to present the results of inductively coupled plasma mass spectrometry (ICP-MS) determination of economically significant metals including rare-earth elements and Y (REY), Co + Ni + Cu obtained from the Fe-Mn deposits (FMD) of different areas selected along the Atlantic Ocean.
Design/methodology/approach
The description of the instrumental part of the analysis was shown in detail, including the choice of the acquisition mode and other settings of the quadrupole ICP-MS Agilent 7700x, which allow to eliminate spectral overlaps as much as possible and to achieve good precision and accuracy of the measurement. The accuracy of the obtained results was controlled by analysis of certified reference materials (CRM) of Fe-Mn nodules of the US Geological Survey – NOD-A-1 and NOD-P-1, as well as the Russian CRM samples of Fe-Mn nodule OOPE 603 (SDO-6) and ore crust OOPE 604 (SDO-7). Statistical processing of the analysis results demonstrated the acceptability of chosen sample preparation technique and ICP-MS tunes for the determination of REY in FMD.
Findings
The performed analytical research allowed giving a geochemical characteristic of studied FMD. The precision for the elements to be determined according to the relative standard deviation (RSD) was within 5.0%.
Originality/value
To move away from the subjective visual assessment of the analytical results quality in terms of absence (or presence) of the REE sawtooth distribution, an original objective mathematical method was proposed.
Details
Keywords
Jinxi Wang, Hongya Niu, Pei Ling, Jingsen Fan, Kunli Luo, Maxim Blokhin and Yuzhuang Sun
Numerous smog events have occurred in recent years in China. Their hazards in mining and industrial cities are more serious than clear days. The samples were collected in the…
Abstract
Numerous smog events have occurred in recent years in China. Their hazards in mining and industrial cities are more serious than clear days. The samples were collected in the mining and industrial city of Handan. During the smog episode, PM10 and PM2.5 concentrations reach up to 980 μg/m3 and 660 μg/m3, respectively. Under SEM (scanning electron microscope) analysis, the particles consist of soot, fly ash and minerals, which could be from coal mines, power plants, steel mills and auto exhausts. Compared with the samples collected on a clear day, the increased PM10 particles are mainly composed of organic matter, especially aromatic compounds. The Pb content in PM10 of the smog day reaches 507.4 ng/m3 and could be caused by vehicle emissions.
Details
Keywords
Fernando Muñoz, María Vargas and Ruth Vicente
This study aims to examine style-deviation practices in the socially responsible mutual funds (SMRF) industry i.e. how mutual funds game their stated financial objectives to earn a…
Abstract
Purpose
This study aims to examine style-deviation practices in the socially responsible mutual funds (SMRF) industry i.e. how mutual funds game their stated financial objectives to earn a higher relative performance ranking. In addition, the consequences of such practices on sustainable scores and money flows are studied.
Design/methodology/approach
A sample of 454 US equity SRMFs is studied. This paper uses panel regressions controlling for time and style fixed-effects.
Findings
This study finds that 17.60% of SRMF managers in the sample are engaged in style deviation practices. These practices positively impact the sustainable performance of SRMFs and negatively impact their financial performance. One effect offsets the other and they consequently do not affect money flows. Another finding is that only investors with lower portfolio sustainability scores do show return-chaser behaviour.
Practical implications
This paper reveals that SRMF managers deviating from their stated financial style face a dilemma that is non-existent for their conventional peers that is style deviation practices affect financial and sustainable performance in opposing ways, whereas SRMF investor utility depends positively on both dimensions. The findings are not conclusive about the effectiveness of style deviation practices in attracting SRMF money flows.
Social implications
SRMF industry has experienced tremendous growth in the past decade. The increased competition in this industry has led managers to strive to attract investors, sometimes by relying on irregular practices that enhance their portfolio results. Regulators should consider how to avoid such perverse behaviour with a view to improving mutual funds transparency.
Originality/value
This is the first research that analyses style deviation practices and their consequences for the SRMF industry.
Details
Keywords
Shu Yi, Lin Xiao, Yong Zhang, Dujuan Duan and Maksim G. Blokhin
This paper describes the organic geochemical characteristics and their roles on barium enrichment in the No. 2 Coal from Huanglong Jurassic Coalfield, China. A total of 18 bench…
Abstract
This paper describes the organic geochemical characteristics and their roles on barium enrichment in the No. 2 Coal from Huanglong Jurassic Coalfield, China. A total of 18 bench samples were taken from Huangling Mine 2. The average content of barium (3701 mg/kg) was about 23 times higher than that of common world coals. Terrestrial higher plants were the main coal-forming parent material. Relying on the parameters of OEP, Pr/Ph and so on, there is little correlation between organic geochemical characteristics and barium enrichment. Therefore, organic material has little influence on the process of coal-forming and the enrichment of barium.
Details
Keywords
Samer BuHamdan, Aladdin Alwisy, Ahmed Bouferguene and Mohamed Al-Hussein
The purpose of this paper is to use the concepts of the multi-attribute utility theory to develop a model to evaluate the design of low-density residential units to increase the…
Abstract
Purpose
The purpose of this paper is to use the concepts of the multi-attribute utility theory to develop a model to evaluate the design of low-density residential units to increase the profit of the company from a certain design, by assessing the changes in the market shares as a result of the built unit’s attributes.
Design/methodology/approach
The proposed platform consists of two stages: Stage I or relational model development and Stage II or design evaluation. Stage I is concerned with developing a mathematical model that links design variables (e.g. the R-Value of the building envelope and construction material) with the assessment attributes (e.g. price and carbon emissions). Stage II ensures the fulfillment of the corporation’s goals in maximizing profit and market shares using multi-attribute utility theory.
Findings
The application of the proposed model on a case study – a single-family house – shows that reducing the selling price of the unit is not always the best marketing strategy builders should pursue to increase their sales and accordingly their profit, as accounting for other attributes (e.g. performance, operational cost and environmental impact) leads to larger changes in the market shares and accordingly in profit.
Research limitations/implications
The limitations of this research are manifested in the following points: it does not account for the impact of the marketing campaigns on the market shares; it considers the profit as a percentage of the construction cost; and it has not been validated on high-density residential buildings.
Practical implications
This research provides speculative builders with a platform that allows the objective evaluation of houses’ designs prior to introducing them to the market so builders can increase their market shares and consequently their profit. The proposed platform also contributes to increasing the sustainable performance of the housing industry, as it allows for the assessment of the design against economic, environmental and social attributes concurrently, which ensures a balanced consideration of the built houses on sustainability pillars.
Social implications
The proposed platform for design evaluation extends the assessment attributes beyond the traditionally considered economic and environmental attributes. By doing so, it assists decision-makers in evaluating the potential social influence of the proposed design and, as a result, reduces the unwanted impact.
Originality/value
This research combines the concepts of multi-attribute utility with market studies to develop an objective decision support tool for evaluating the design of speculative houses to increase the sustainable performance of the builders without compromising on their profit.
Details
Keywords
Francis Olawale Abulude, Domenico Suriano, Samuel Dare Oluwagbayide, Akinyinka Akinnusotu, Ifeoluwa Ayodeji Abulude and Emmanuel Awogbindin
This study aimed to characterize the concentrations of indoor pollutants (such as carbon dioxide (CO2), ozone (O3), nitrogen dioxide (NO2) and sulfur dioxide (SO2), as well as…
Abstract
Purpose
This study aimed to characterize the concentrations of indoor pollutants (such as carbon dioxide (CO2), ozone (O3), nitrogen dioxide (NO2) and sulfur dioxide (SO2), as well as particulate matter (PM) (PM1, PM2.5 and PM10) in Akure, Nigeria, as well as the relationship between the parameters’ concentrations.
Design/methodology/approach
The evaluation, which lasted four months, used a low-cost air sensor that was positioned two meters above the ground. All sensor procedures were correctly carried out.
Findings
CO2 (430.34 ppm), NO2 (93.31 ppb), O3 (19.94 ppb), SO2 (40.87 ppb), PM1 (29.31 µg/m3), PM2.5 (43.56 µg/m3), PM10 (50.70 µg/m3), temperature (32.4°C) and relative humidity (50.53%) were the average values obtained. The Pearson correlation depicted the relationships between the pollutants and weather factors. With the exception of April, which had significant SO2 (18%) and low PM10 (49%) contributions, NO2 and PM10 were the most common pollutants in all of the months. The mean air quality index (AQI) for NO2 indicated that the AQI was “moderate” (51–100). In contrast to SO2, whose AQI ranged from “moderate” to “very unhealthy,” O3's AQI ranged from “good” (50) to “unhealthy” (151–200). Since PM1, PM2.5 and PM10 made up the majority of PC1’s contribution, both PM2.5 and PM10 were deemed “hazardous.”
Practical implications
The practical implication of indoor air pollution is long-term health effects, including heart disease, lung cancer and respiratory diseases such as emphysema. Indoor air pollution can also cause long-term damage to people’s nerves, brain, kidneys, liver and other organs.
Originality/value
Lack of literature in terms of indoor air quality (IAQ) in Akure, Ondo State. With this work, the information obtained will assist all stakeholders in policy formulation and implementation. Again, the low-cost sensor used is new to this part of the world.
Details
Keywords
Khaled Alqahs, Yagoub Y. Al-Kandari and Mohammad S. Albuloushi
The purpose of this study is to examine the respondents’ evaluation of the pervasiveness of fake news through various SM platforms in Kuwait. The authors also examined the…
Abstract
Purpose
The purpose of this study is to examine the respondents’ evaluation of the pervasiveness of fake news through various SM platforms in Kuwait. The authors also examined the respondents’ attitudes toward most fake news on SM. A total of 1,539 Kuwaitis were selected.
Design/methodology/approach
The questionnaire was the major tool for this study. The respondents, from whom demographic information was obtained, were asked about which SM platforms most frequently spread fake news, their attitudes toward the subjects most frequently involved in spreading fake news, their degree of use of the six SM platforms and interest in various subjects, and the attitudes toward the negative nature of SM news. SPSS was used for the data analysis.
Findings
The results showed that WhatsApp was the most likely to be used to disseminate fake news; Twitter and Instagram ranked second. The younger subjects were affected more by text and voice clips than the older ones.
Originality/value
The study, hopefully, produces new knowledge on the subject of fake news in social media, especially in the Arab world, since there are few studies conducted in the region. The study showed that WhatsApp was the SM tool most likely to be responsible for disseminating fake news in Kuwait, which may shed light on the usage of this application to be a news tool, rather than merely an interpersonal communication medium.