Search results

This article presents the galvanostatic anodic oxidation of two types of stainless steel alloys, ferritic (15.03% Cr) and austenitic (20.45% Cr, 8.37% Ni), in molten NaNO₃‐KNO₃ eutectic mixture at different temperatures ranging from 673‐873K. At a temperature of 673K the shape of polarization curves for the alloys is complex, while at higher temperatures it is simple. The passivity potential range was calculated as the difference between the passivation potential, E_p, and the breakdown potential, E_b. The value of E_b – E_p decreases with the increase of temperature. The amount of iron, chromium and nickel dissolved in the melt was determined after each experiment using atomic absorption spectroscopy. The composition and structure of the corrosion products formed on the surface of electrodes were examined by X‐ray diffraction analysis. Corrosion parameters derived from the polarization curves are calculated; these are: polarization resistance at low current densities, R_p, exchange current density, i_o, corrosion current density, i_corr, passivation current density, i_p. It was found that the increase of temperature increases i_o, i_corr, and i_p while R_p, decreases. From these results it was found that, under the given conditions, the austenitic stainless steel alloy is more corrosion resistant than the ferritic one. The activation energy of corrosion was estimated for the two alloys.

The purpose of this research paper focused on studying the role of activated carbons (ACs), which were synthesized from long-chain aldehyde-based xerogels (Xs-AC), as benefit additives to enhance the application of a low-cost urea formaldehyde (UF) adhesive for production of rice straw (RS) composites complying with both the standard specifications of particle-board type and the board produced from using conventional adhesive of RS fibers (methylene diphenyl diisocyanate, MDI). The results are supported by differential scanning calorimetry (DSC) analysis, which indicated the curing and interaction of RS fibers with the adhesive systems.

RS-based composites of particle-board type were prepared from applying new Xs-AC–UF adhesive systems to RS particles. For comparison, particle boards by using commercial UF and 4 per cent MDI were also prepared. To clear the beneficial effect of X-ACs as new HCHO (formaldehyde)-scavengers, the properties of the resulted boards were compared with those produced from the previous investigated scavenger: amide-containing starch-UF (AM/St–UF), and treated RS. DSC analysis was performed on the RS adhesive system, to follow the curing and the interaction behavior of UF with fibers in the presence of Xs-ACs.

The promising results obtained of RS particle boards from using the investigated new HCHO-scavenger are modulus of rupture (MOR) = 17.2 MPa, modulus of elasticity (MOE) = 4,689 MPa and internal bond (IB) strength = 0.49 MPa. While, the thickness swelling (TS) and maximum reduction in free-HCHO are 48.5 and 44.6 per cent, respectively; this reduction value specified the particle-board of E1-E2 type.

The X-AC-UF adhesive systems and treated RS provided particle boards with mechanical properties (MOR, MOE and IB) that met the standard specification values (class M-2 according to ANSI standard and P-2 according to EN standard requirements), together with maximum reduction in toxicity of UF. However, the resistance in water swelling property is weak and needs further study to be solved.

The incorporation of small percentage of new HCHO-scavenger (X-AC) to UF is an effective way to improve its thermal behavior. Moreover, the mechanical properties of agro-based composites based on the treated RS waste together with the X-AC-UF system exceeded those values of panels produced from (AM/St-UF) and also from (4 per cent MDI).

Incorporating the Xs-AC to commercial UF will be of benefit for saving the health of wood co-workers and motivating the wood mill to export its wood products, as well as minimizing the export of MDI.

This paper was based on enhancing the potential utilization of both undesirable RS agro wastes and environmentally unacceptable low-cost UF adhesive in the production of agro-composites that comply with the International Standard Specifications of particle board type. In this respect, a new HCHO-scavenger was synthesized and applied, based on AC from non-conventional xerogels. This study presents a solution to protect the environment from pollution, as a result of burning the undesirable RS, as well as to protect the workers and users of wood panels from exposure to the toxic and carcinogenic gas (formaldehyde). It also benefits in replacing the high cost of the RS adhesive (MDI) by using low-cost modified UF.

The electrodeposition of any metal over titanium substrates meets with many problems due to the formation of a non‐conductive layer of titanium oxide on the surface of substrates during the electroplating process. Trials were made to overcome these problems by the pre‐anodisation of titanium substrates in oxalic acid solution of concentration 100g/l, at high current density of 60‐95mA/cm^–2, and at ambient temperature. In these conditions, a thin, porous and conductive titanium oxide film can be obtained, which will then support electroplating processes. Rhodium metal was electrodeposited over the anodised titanium substrates from a bath consisting of Rh₂(SO₄)₃, 5.2g/l and H₂SO₄, 100g/l. At optimum conditions of electroplating, the rhodium electrodeposits were formed over the anodised titanium substrate with high adhesion, brightness and high current efficiency (92.05 per cent).

The purpose of this paper is to pursue the themes of feminine identity, doubling and (in)visibility; first in terms of “signifyin(g)” as a cultural and literary strategy, and second, in terms of quilting seen from the fiction of Alice Walker to the quilting of Gee's Bend. In the background, there plays the relationship between art and commodification.

The paper examines “commodification” and “doubling” in the case of the Gee's Bend quilt makers. The quilts foreshadow the modernist aesthetic and are of the highest aesthetic quality. They were made in a traditional rural society by very poor uneducated black women. The quilts were not made to be sold, but were dedicated to familial remembrance and to immediate aesthetic pleasure.

Commodification doubles self and work, life and object, uniqueness and standardization, art and management. For the artist, the unicity, beauty, inspiration and creativity of art is doubled in the sale, marketing, display, distribution and mass production of “art works.” Making art is intimate, personal and individual; selling art requires public display, pleasing the all‐important customer(s) and dealing with many sorts of in‐betweens. What “commodification” is on the artist/art work level, is “doubling” on the I/me, self/persona, private/public, and in‐group/out‐group level.

The author proposes, from the example of quilt‐making, a wide‐ranging interrogation: “Is escape from commodification possible?”

Inhibitive efficiency of solutions of substituted isoxazole and isoxazoline organic compounds on Fe dissolution in deaerated solutions of 4M HCL using nitrogen gas was studied at 15°C using the steady‐state potentiostatic current‐potential method at a sweep rate of 1 mV/S. Inhibitive efficiencies were calculated at constant time of immersion of the working electrode from the measurement of current densities, icorr µA cm‐2, in the presence and absence of the organic compounds at the corrosion potentials, Ecorr. Inhibitive efficiency, ?, increases as the concentration of the organic compound increases to a certain limit then decreases again. This may be due to stimulation effect in which the solubility of the adsorbate increase with concentration of the organic compounds. In the region, where the organic compounds act as inhibitors, substituted oxazole compounds showing better inhibitive efficiencies, this maybe due to the fact that the presence of double bond between the two carbon atoms in the oxazole unit enhance the adsorption via ?‐electrons and/or to decrease in steric effect. Other factors that have been found to affect the inhibition efficiencies of these substrates are the size and the relative strength of the electron releasing group of R‐substituents on the isoxazole or isoxazoline unit.

The purpose of this paper was to determine the antifungal activities of different solvent extracts of common plants in vitro and in vivo against banana anthracnose fungus Colletotrichum musae (Berk & M.A. Curtis) Arx, and to investigate its effects on the pathogen and identify the bio active component(s).

Extracts were obtained from leaves, tender shoots, rhizomes, bulbs, seeds and fruits of 42 naturally growing plant species following hot sequential extraction. Preliminary screening of the solvent extracts was done based on the inhibition of radial mycelial growth of C. musae following poison food technique and conidial germination inhibition by cavity slide technique. The selected extracts were assessed for their effect on harvested banana in reducing anthracnose during storage. The active components in the bio-active fractions of plant extract were identified by gas chromatography-mass spectroscopy.

Methanol extracted a larger quantity of material (between 6.9 and 12.5 per cent) than hexane or chloroform, and all its extracts were active against the test pathogen with mycelial growth inhibition ranging from 13.70 to 88.89 per cent. Zingiber officinale rhizome extract as well as Polyalthia longifolia and Clerodendrum inerme leaf extracts exhibited more than 80 per cent inhibition of mycelial growth. Total inhibition of spore germination of C. musae was recorded in Z. officinale and P. longifolia extracts at 0.3 per cent w/v and 0.5 per cent w/v concentration, respectively, while only 68 per cent spore inhibition was recorded in C. inerme at 0.5 per cent w/v concentration. Of the three plant species, Z. officinale had the best antifungal activity (18.0 per cent disease incidence; 2.2 disease severity scale) when banana fruits were dipped in the extract at a concentration of 0.5 per cent w/v at 5 days of storage in ambient condition (80-82 per cent R.H., 27 ± 1°C). The bio-active compounds in the extract of Z. officinale were identified as alpha-curcumene and zingerone.

Based on the antifungal activity, plant extract of Z. officinale can be used as an effective alternative to chemicals in controlling anthracnose pathogen in harvested banana.

The corrosion behaviour of a ferritic (alloy 1) and two austenitic stainless steel alloys (alloys 2 and 3) was studied in a molten Li₂CO₃‐Na₂CO₃‐K₂CO₃ ternary mixture in the presence of Na₂O₂ additions at temperatures of 475, 500, 525 and 550°C. The techniques of measurements were open circuit potential, galvanostatic anodic polarisation and cyclic voltametry. The addition of Na₂O₂ increased the concentration of oxide ions in the carbonate melt. There is a tendency for oxidation and passivation of the alloys to commence immediately on their immersion in the melt, and end at the passivity breakdown, where the decomposition of carbonate ions occurs with the formation of CO₂ and O₂ gases. The oxide scales of a ferritic alloy are less protective than those formed on the austenitic alloys. The oxide scales, in most cases, are multilayered, and the presence of Na₂O₂ in the carbonate melt gives rise to the formation of a more protective inner layer of oxide scales on the surface of the austenitic alloys.

This paper aims to study the effect of hydrolysis route of hydroxypropyl cellulose (HPC) on its esterification performance as liquid crystal material. The assessment was carried out from the data of spectra (Fourier-transform infrared analysis [FTIR] and 1H-nuclear magnetic resonance [1H-NMR]), thermal stability as well as optical properties via forming ordered mesophases at lower concentration than HPC.

The HPC was hydrolyzed by hydrochloric acid-methanol at times 9 and 18 h, and the products were esterified by decanoyl chloride. The products of hydrolysis and the esterification were characterized by FTIR, NMR, nonisothermal analysis, thermo-gravimetric analysis (TGA) and polarizing microscope to evaluate the role of degree of substitution of HPC as a result of hydrolysis, on esterification degree, thermal stability and thermal and liquid crystal behavior of the final esterified HPC.

The pretreatment by acid hydrolysis of HPC was successful for synthesizing novel cholesteric hydroxypropyl cellulose ester. The data of FTIR and TGA thermal analysis proved that hydrolysis and esterification of HPC with the decanoyl chain significantly enhanced crystallinity of this cellulose derivative from 0.57 to (1.7–1.9). Moreover, they provided products with superior thermal stability than pure HPC, as noticed from increasing the activation energy of degradation (E_a) from 514.3 to 806.2 kJ/mol. The NMR measurement proved that hydrolysis of HPC for 9 and 18 h decreased the degree of substitution from 3 to 2.1 and 1.3, respectively. Moreover, the esterified HPC showed a promising birefringence texture (chiral nematic) besides decreasing the critical concentration from 30% for HPC to 10% for the esterified unhydrolyzed HPC, while superior decreasing to 1–5% was observed for the esterified hydrolyzed HPC.

There are two stages for preparation of decanoyl ester hydroxypropyl cellulose. At the first stage, HPC was treated by hydrochloric acid-methanol in ratio 1:10 at times 9 and18 h. At the second stage, HPC and hydrolyzed HPC were refluxed with decanoyl chloride (1:6) in presence of nitrogen atmosphere. The final product was precipitated by distilled water.

There are two stages for preparation of decanoyl ester hydroxypropyl cellulose. At the first stage, HPC was treated by hydrochloric acid-methanol in ratio 1:10 at times 9 and18 h. At the second stage, HPC and hydrolyzed HPC were refluxed with decanoyl chloride (1:6) in presence of nitrogen atmosphere. The final product was precipitated by distilled water.

The novelty of this work was focused on enhancing the crystallinity, thermal stability and liquid crystal behavior of esterified HPC, via decreasing the degree of substitution and consequently the type of OH group subjected to esterification. The decanoyl ester formation from the hydrolyzed hydroxypropyl cellulose is able to form ordered mesophases at even low concentration (promising birefringence texture at concentrations 1–5%). It is worthy to notice that the investigated route is able to omit the role of graphene oxide in promoting the liquid crystal behavior of HPC, as it hasn't any effect on critical concentration. This work will promote the use of HPC in technological applications, e.g. high modulus fibers and electronic devices.

This paper aims to appraise the inhibitory effect of saponins extracted from Gongronema latifolium (SEGL) on mild steel in acid media. This is in a bid to conserve our environment and maintain the integrity of engineering structures and materials.

The corrosion inhibition of SEGL and ethanolic extracts of the leaves of G. latifolium (EEGL) on mild steel was studied by hydrogen evolution technique within a temperature range of 30-60°C in tetraoxosulphate (VI) acid solutions.

The extracts inhibit the corrosion of mild steel, and the inhibition efficiency depends on the concentration of the plant extract, temperature and the period of immersion. SEGL was comparatively more efficient than EEGL. Optimum values of the inhibition efficiency for both the EEGL and SEGL (93.7 and 96.5 per cent, respectively) were obtained at extract concentration of 10 g/L, whereas the least values were obtained at extract concentration of 0.5 g/L.

This paper provides new information on the possible application of isolated SEGL as an environmentally friendly corrosion inhibitor. The possible mechanism of the inhibitive action is also given.

This study aims to investigate the corrosion behavior of stir-cast hybrid aluminum composite reinforced with CeO₂ and graphene nanoplatelets (GNPs) nanoparticulates used as cylinder liner material in the engines (automotive, aerospace and aircraft industries).

The composites were prepared using the stir-casting technique, and their microstructure and corrosion behavior was evaluated using scanning electron microscopy (SEM) and potentiodynamic polarization test, respectively.

The results showed that the addition of CeO₂ and GNPs improved the corrosion resistance of the composites, and the optimal combination of these two nanoparticles was found to be 3 wt.% CeO₂ and 3 wt.% GNPs. The enhanced corrosion resistance was attributed to the formation of a protective layer on the surface of the composite, as well as the effective dispersion and uniform distribution of nanoparticles in the matrix. The 0.031362 was noted as the lowest corrosion rate (mmpy) and was noticed in 94% Al-6061 alloy + (3 Wt.% CeO₂ + 3 Wt.% GNPs) sample at room temperature and at elevated temperatures; the corrosion rate (mmpy) was observed as 0.0601 and 0.0636 at 45 °C and 75 °C, respectively.

In the vast majority of the published research publications, either cerium oxide or graphene nanoplatelets were utilized as a single reinforcement or in conjunction with other types of reinforcement such as alumina, silicon carbide, carbon nano-tubes, tungsten carbide, etc., but on the combination of the CeO₂ and GNPs as reinforcements have very less literatures with 2 wt.% each only. The prepared hybrid aluminum composite (reinforcing 1 wt.% to 3 wt.% in Al-6061 alloy) was considered for replacing the cylinder liner material in the piston-cylinder arrangement of engines.