Search results

The sensitivity of differential‐pressure flow meters to the quality of the approaching flow continues to be a cause for concern to flow meter manufacturers and users. Distortions to the approaching velocity profiles generated by pipe fittings and installations located upstream of a flow meter, can lead to considerable errors in flow metering. This cannot be ignored because of the likely cost and process efficiency implications. This paper describes the effects of various entrance flow velocity profiles on the performance of an orifice flow meter with and without flow conditioning. Asymmetric swirling velocity profiles were generated by a ball valve. These caused significant shifts to the meter’s calibration. The use of a vaned‐plate flow conditioner, consisting of six vanes attached to a 70 per cent porosity plate, greatly improved the performance of the meter. Thus, the device can be used as part of a flow metering package that will have considerably reduced installation lengths. The less‐sophisticated NEL plate proved to be a good flow straightener, i.e. a good swirl remover, but was not an efficient flow conditioner.

The sensitivity of orifice plate metering to poorly conditioned and swirling flows are subjects of concerns to flow meter users and manufacturers. The distortions caused by pipe fittings and pipe installations upstream of the orifice plate are major sources of this type of non‐standard flows. These distortions will alter the accuracy of metering up to an unacceptable degree.Design/methodology/approach – The design of orifice plate meters that are independent of the initial flow conditions of the upstream is a major object of flow metering. Either using a long straight pipe or a flow conditioner upstream of an orifice plate usually achieves this goal. The effect of cone swirler flow conditioner for both standard and non‐standard flow conditions has been carried out in the experimental rig. The measuring of mass flow rate under different conditions and different Reynolds numbers were used to establish a change in discharge coefficient relative to a standard one.Findings – The experimental results using the cone swirler flow conditioner showed that the combination of an orifice plate and cone swirler flow conditioner is broadly insensitive to upstream disturbances. The results clearly show that this flow conditioner can attenuate the effect of both swirling and asymmetric flows on metering to an acceptable level.Originality/value – Previous work on the orifice plate has shown that the concept has promise. The results of using a combination of a cone swirler and orifice plate for non‐standard flow conditions including swirling flow and asymmetric flow show this package can preserve the accuracy of metering up to the level required in the standards, providing that a new discharge coefficient is used for the combined swirler and orifice plate.

Changing scattered and dynamic business rules in business workflow systems has become a growing problem that hinders the use and configuration of workflow-based applications. There is a gap in the existing research studies which currently focus on solutions that are application specific, without accounting for the universal logical dependencies between the business rules and, as a result, do not support adaptation of the business rules in real time. The paper aims to discuss this issue.

To tackle the above problems, this paper adopts a bottom-up approach, which puts forward a component model of the business process workflows and then adds business rules which have clear logical semantics. This allows incremental development of the workflows and semantic indexing of the rules which govern them during the initial acquisition.

The paper introduces an event-driven model for development of business workflows which is purely logic-based and can be easily implemented using an object-oriented technology, together with a model of the business rules dependencies which supports incremental semantic indexing. It also proposes a two-level inference mechanism as a vehicle for controlling the business process execution and the process of adaptation of the business rules at real time based on propagating the dependencies.

The framework is strictly logical and completely domain-independent. It allows to account both synchronous and asynchronous triggering events as well as both qualitative and quantitative description of the conditions of the rules. Although our primary interest is to apply the framework to the business processes typical in the construction industry we believe our approach has much wider potential due to its strictly logical formalization and domain independence. In fact it can be used to control any business processes where the execution is governed by rules.

The framework could be applied to both large business process modelling tasks and small but very dynamic business processes like the typical digital business processes found in online banking or e-Commerce. For example, it can be used for adjusting security policies by adding the capability to adapt automatically the access rights to account for additional resources and new channels of operation which can be very interesting ion both B2C and B2B applications.

The potential scope of the impact of the research reported here is linked to the wide applicability of rule-based systems in business. Our approach makes it possible not only to control the execution of the processes, but also to identify problems in the control policies themselves from the point of view of their logical properties – consistency, redundancies and potential gaps in the logics. In addition to this, our approach not only increases the efficiency, but also provides flexibility for adaptation of the policies in real time and increases the security of the overall control which improves the overall quality of the automation.

The major achievement reported in this paper is the construction of a universal, strictly logic-based event-driven framework for business process modelling and control, which allows purely logical analysis and adaptation of the business rules governing the business workflows through accounting their dependencies. An added value is the support for object-oriented implementation and the incremental indexing which has been possible thanks to the bottom-up approach adopted in the construction of the framework.

The polarisation ratio of the linearly polarised light backscattered by fly ash particles is indicative of the carbon content. The determination of this parameter is useful to characterise the efficiency of coal burning furnaces. The main aim of this work is to design a single optical probe to measure the polarisation ratio. A probe has been built that can be bolted onto a furnace duct, and it has been tested on a wide range of ashes. A neural network analysis has also been explored for predicting carbon content.

The present study aims to identify and investigate the antecedents of enhanced level of cyber-security at the organisational level from both the technical and the human resource perspective using human–organisation–technology (HOT) theory.

The study has been conducted on 151 professionals who have expertise in dealing with cyber-security in organisations in sectors such as retail, education, healthcare, etc. in India. The analysis of the data is carried out using partial least squares based structural equation modelling technique (PLS-SEM).

The results from the study suggest that “legal consequences” and “technical measures” adopted for securing cyber-security in organisations are the most important antecedents for enhanced cyber-security levels in the organisations. The other significant antecedents for enhanced cyber-security in organisations include “role of senior management” and “proactive information security”.

This empirical study has significant implications for organisations as they can take pre-emptive measures by focussing on important antecedents and work towards enhancing the level of cyber-security.

The originality of this research is combining both technical and human resource perspective in identifying the determinants of enhanced level of cyber-security in the organisations.

This paper aims to examine the impact of the assurance and advisory role of internal audit (ADRIA) on organisational, human and technical proactive measures to enhance cybersecurity (CS).

The questionnaire was used to collect data for 97 internal auditors (IAu) from the Gulf Cooperation Council countries. The authors used partial least squares (PLS) to test the hypotheses.

The results show a positive effect of the ADRIA on each of the organisational proactive measures, human proactive measures and technical proactive measures to enhance CS. The study also found a positive effect of the confirmatory role of IA on both human proactive measures and technical proactive measures to enhance CS. No effect of the confirmatory role of IA on the organisational proactive measures is found.

This study focused on only three proactive measures to enhance CS, and this study was limited to the opinions of IAu. In addition, the study was limited to using regression analysis according to the PLS method.

The results of this study show that managers need to consider the influential role of IA as a value-adding activity in reducing CS risks and activating proactive measures. Also, IAu must expand its capabilities, skills and knowledge in CS auditing to provide a bold view of cyber threats. At the same time, the institutions responsible for preparing IA standards should develop standards and guidelines that help IAu to play assurance and advisory roles.

To the best of the authors’ knowledge, this is the first study of its kind that deals with the impact of the assurance and ADRIA on proactive measures to enhance CS. In addition, the study determines the nature of the advisory role and the assurance role of IA to strengthen CS.

The purpose of this review is to conduct a bibliometric analysis of financial fraud exploiting the elderly by mapping its evolution, identifying major metrics and discussing directions for future research.

A bibliometric analysis was conducted, based on 434 articles retrieved from the Web of Science that represent the academic literature on the topic from 1995 to the first quarter of 2024. This paper analyses the antecedents of financial fraud exploiting the elderly, the publication trends and the most prolific countries, institutions, journals, research areas and authors. Bibliometric analyses based on co-citation and co-words explore the intellectual structure of the topic. A bibliographic coupling analysis reveals the hottest research trends in this field.

A significant increase in the number of publications in recent years shows the importance gained by this research stream. The bibliometric analysis identifies four clusters throughout the literature: differentiation of types of elder abuse; protection of the elderly from fraud; cognitive and decision-making capacity in ageing; and factors influencing fraud victimization of the eldest. The most recent research lines identified through bibliographic coupling focused on the contextual and personal antecedents of financial exploitation of the elderly, as well as the possible impact of interventions. Several key research gaps and additional suggestions for further studies, as well as action lines for the financial authorities and economic agents, are outlined.

This paper contributes to knowledge about financial fraud exploiting the elderly synthesizing the existing literature, stressing that the banking industry has to deal with such financial fraud in the context of a growing relevance of the silver economy.

This paper evaluates the benefits of harnessing artificial intelligence (AI) tools for safety compliance on construction projects in Nigeria.

This study employed a specialised approach by combining qualitative and quantitative approach. The study carried out a brief systematic literature review (SLR) to identify the variables of the study. These variables were prepared in a questionnaire which was distributed among professionals within the Nigerian construction sector using purposive sampling. A total of 140 questionnaires were retrieved. The collected data were analysed using Relative Importance Index (RII), Ginni’s Mean (GM) and exploratory factor analysis (EFA).

The analysis revealed that all the identified benefits hold considerable importance, with an average RII of 0.86, with real-time monitoring as the most prominent advantage. However, using the GM which was 0.861, the study identified “mitigation of hazards on worksites” as the stationary benefit of AI in safety compliance.

The study was conducted exclusively within Nigeria’s Federal Capital Territory, using a cross-sectional survey approach.

The results will be valuable for professionals and practitioners in the Nigerian construction sector, as they will acquire insights into the potential advantages of utilising AI tools for monitoring of safety compliance on construction projects.

The study adopted a robust approach by identifying the stationary benefit using the GM in combination with RII and EFA.

The effectiveness of interorganizational governance is one of the most significant concerns of firms involved in supply chain management. Previous studies have extensively examined various interorganizational governance strategies. However, the dynamic and implementation details of interorganizational governance receive little attention, which leads to the defects of interorganizational governance literature. This study tries to explore this issue.

Based on the process and cybernetic view, this study conceptualized four interorganizational governance processes and their respective critical activities to capture the dynamic and implementation details of interorganizational governance. Furthermore, this study investigated the mapping of governance strategies into different critical activities, which unveil the various manifestations of governance strategies across these critical activities.

Four interorganizational governance processes and their respective critical activities would overarch the dynamic and implementation details of governance strategies. Furthermore, various governance strategies also would have different manifestations across the critical activities of the four processes.

This paper fills the gaps in interorganizational governance literature in which the dynamic details of governance strategies are unclear. The new conceptualization provides a new paradigm for researchers to zoom in on the subtle dynamics of interorganizational governance. The new conceptualization indicates a few promising future research directions.

Many organizations struggle to achieve their desired levels of business process flexibility and support. However, these two capabilities conflict with each other and different tradeoffs have to be made. In this paper, the authors analyze different process conceptualizations and discuss their implications. The authors argue that the conceptualizations people adopt to think (conceptualize) about business processes affect the way they model them, which in turn result in different flexibility-support tradeoffs.

A set of properties is proposed to compare process conceptualizations: dominant concept, contract, and existential and representational properties. Using these properties, several process conceptualizations are analyzed and integrated in a comparison chart, which highlights different flexibility-support tradeoffs. The storytelling method is adopted to support the analytic process.

The authors show how different process conceptualizations result in different flexibility-support tradeoffs. The authors suggest that we need to intervene on a set of properties of process conceptualizations to achieve different flexibility-support tradeoffs.

This research contributes to understanding the relationships between process conceptualizations, process modeling, and the flexibility-support tradeoff. A comparison chart helps organizations analyze their desired levels of flexibility and support using a set of properties.

The extent of covered viewpoints makes this study unique in the process management field. Such effort provides a contribution towards a more multidisciplinary discussion of process models, which integrates different process conceptualizations.