Search results

The present study aims to focus on the feasibility of using an aqueous extract from the fruit shell of Camellia oleifera Abel as a source of natural colourant in printing-paste preparation for pigment printing of cotton fabric. The effects of pre- and post-mordanting with three common metallic mordants, that is AlK(SO₄)₂, CuSO₄ and FeSO₄ on colour yield and colour fastness properties are also investigated.

The printing paste was prepared by mixing the concentrated Camellia oleifera Abel fruit shell extract solution with commercially available synthetic thickener and binder. The fabric sample was printed with the prepared printing paste using a flat-screen printing technique. To determine the effects of pre- and post-mordanting, AlK(SO₄)₂, CuSO₄ and FeSO₄ mordant aqueous solutions with various concentrations were applied using the pad-dry technique. Comparisons between printing with and without mordants were evaluated in terms of colour strength (K/S values) and colour fastness to washing, light, crocking and perspiration.

Without the mordants, the printed fabric had a yellowish brown shade with acceptable colour fastness properties, that is fair to good wash fastness, moderate light fastness, good to very good crocking fastness and fair to good perspiration fastness. The use of mordants, especially CuSO₄ and FeSO₄, not only enhanced colour strength but also imparted different colours to the fabric. Compared to the unmordanted fabrics, colour fastness properties were mostly comparable or improved in the mordanted fabrics depending on the type and concentration of mordants.

Although in the case of CuSO₄ the light fastness was increased to a good to very good level, it is recommended that the final print be produced with a concentration of less than 0.125 gL⁻¹ to yield the print with the residual amount of Cu metal under the limit, that is less than 50 ppm as regulated by the Oeko-Tex^® standard.

The obtained prints from Camellia oleifera Abel fruit shell extract provided shades with satisfactory colour fastness to washing, light, crocking and perspiration. The extract from Camellia oleifera Abel fruit shell has the potential to be used as an alternative to synthetic dye in the textile industry.

The use of Camellia oleifera Abel fruit shells, which are considered as abundant byproducts of tea seed oil production, as natural colouring agents for pigment printing of cotton fabric has been reported for the first time. It will minimise the environmental impact of this waste and create more valuable textile products.

The purpose of this paper is to give compiled information on previously applied cotton fabric surface modifications. The paper covered most of the modifications done on cotton fabric to improve its properties or to add some functional properties. The paper presented mostly studied research works that brought a significant surface improvement on cotton fabric.

Different previous works on surface modifications of cotton fabrics such as pilling, wrinkle and microbial resistance, hydrophobicity, cationization, flame retardancy and UV-protection characteristics were studied and their methods of modification including the main findings are well reported in this paper.

Several modification treatments on surface modification of cotton fabrics indicated an improvement in the desired properties in which the modification is needed. For instance, the pilling tendency, wrinkling, microbial degradation and UV degradation drawbacks of cotton fabric can be overcome through different modification techniques.

To the best of the author’s knowledge, there are no compressive documents that covered all the portions presented in this review. The author tried to cover the surface modifications done to improve the main properties of cotton fabric.

Enzymatic treatment of jute fabrics with neutral cellulase enzymes is investigated systematically. The factors affecting enzymatic treatment including, time, liquor ratio, temperature and enzyme concentration are also examined. The hydrolyzed pretreated surfaces of jute fabrics were characterized by scanning electron microscope (SEM), weight loss (WL) and wettability (Wet) tests. WL% and Wet were found to increase as the time, temperature and cellulase concentration increased. SEM images showed that the surface of the treated fabrics was smoother and more polished than that of the untreated fabrics after being subject to optimal treatment conditions.

In contrast, rough surface, fibrillation, surface pilling and multicellular were observed in the images of the untreated fabrics. The dyeing behavior of both untreated and enzymatically treated jute fabrics with reactive dyes was also evaluated under different dyebath conditions. The measured exhaustion and fixation percent showed a significant enhancement of the dyeability of biopolished pretreated fabrics compared to untreated fabrics. The results of fastness properties also indicate good washing, perspiration and rubbing fastness.

Due to herbs and plants’ therapeutic properties and simplicity of availability in nature, humans have used them to treat a variety of maladies and diseases since ancient times. Later, as technology advanced, these plants and herbs gained significant relevance in some industries due to their suitable chemical composition, abundant availability and ease of access. Aegle marmelos is a species of plant that may be found in nature. Yet, little or very little literature was located on the coloration behavior of this plant’s leaves. This study aims to focus on the effect of different parameters on the extraction of colorant from Aegle marmelos leaves.

Some factors that affected on the extraction processes were examined and found to have significant impacts on the textile dyeing such as the initial dye concentration, extracted temperature, extracted bath pH and extracted time were all changed to see how they affected color extraction. The authors report a direct comparison between three heating methods, namely, microwave irradiation (MWI), ultrasonic waves (USW) and conventional heating (CH). The two kinetic models have been designed (pseudo-first and pseudo-second orders) in the context of these experiments to investigate the mechanism of the dyeing processes for fabrics under study. Also, the experimental data were analyzed according to the Langmuir and Freundlich isotherms.

From the result, it was discovered these characteristics were found to have a substantial effect on extraction efficiency. Temperature 90°C and 80°C when using CH and USW, respectively, while at 90% watt when using MWI, period 120 min when using CH as well as USW waves, while 40 min when using MWI, and pH 4, 5 and 10 for polyamide, wool and cotton, respectively, were the optimal extraction conditions. Also, the authors can say that wool gives a higher absorption than the other fabric. Additionally, MWI provided the best color strength (K/S) value, and homogeneity, at low temperatures reducing the energy and time consumed. The coloring follows the order: MWI > USW > CH. The adsorption isotherm of wool could be well fitted by Freundlich isotherm when applying CH and USW as a heating source, while it is well fitted by the Langmuir equation in the case of MWI. In the study, it was observed that the pseudo-first-order kinetic model fits better the experimental results of CH with a constant rate K₁ = −0.000171417 mg/g.min, while the pseudo-second-order kinetic model fits better the experimental results of absorption of both MWI (K2 = 38.14022572 mg/g.min) and USW (K₂ = 12.45343554 mg/g.min).

There is no research limitation for this work. Dye was extracted from Aegle marmelos leaves by applying three different heating sources (MWI, ultrasonic waves [USWW] and CH).

This work has practical applications for the textile industry. It is concluded that using Aegle marmelose leaves can be a possible alternative to extract dye from natural resource by applying new technology to save energy and time and can make the process greener.

Socially, it has a good impact on the ecosystem and global community because the extracted dye does not contain any carcinogenic materials.

The work is original and contains value-added products for the textile industry and other confederate fields.

The present research aims to manage the formulations of pigment-based inks containing aminopropyl/vinyl/silsesquioxane (APSV) as a pigment binding agent for inkjet printing of polyester as a commercial trial for the printing of polyester as a single-step process.

The proposed formulations incorporated APSV by using the mini-emulsion technique at a low relieving temperature under the thermal initiation or UV radiation of vinyl-terminated groups in APSV. In this study, the storage stability of inks with regard to physical properties was broadly examined. Moreover, the color performance, including colorimetric data, color fixation and fastness properties of printed fabrics was evaluated.

The results indicated that the inks containing APSV were formulated and were stable in terms of particle size, dispersion stability, surface tension and viscosity over a period of one month and for four freeze/thaw cycles. APSV successfully fixed the pigment-based inkjet inks on polyester fabric and could achieve a significantly higher color performance and degree of fixation than the formulated inks without APSV.

It could also fulfill all the physical properties of ink prerequisites over storing and eliminating all challenges in improving the performance and utilization of inkjet printing.

APSV can also be used as a pigment binding agent to formulate inks for inkjet printing of polyester fabrics as the authors’ past examination for inkjet printing of polyester fabrics post-treated with APSV.

This study eliminates the noteworthy challenges in formulating the pigment-based inks for textile applications by incorporation of a binder while keeping up the necessary viscosity profile for a specific print head.

This study addressed all the issues arising from the complex nature and very challenging requirements of inkjet inks.

This study aims to address a comprehensive and integrated investigations pertaining to the preparation of AgNPs with well-defined nano-sized scale using the aforementioned poly (meth acrylic acid [MAA])–chitosan graft copolymer, which is cheap, nontoxic, biodegradable and biocompatible agent as a substitute for the traditionally used toxic reducing agents.

AgNPs are prepared under a range of conditions, containing silver nitrate and poly (MAA)–chitosan graft copolymer concentrations, time, temperature and pH of the preparation medium. To classify AgNPs obtained under the various conditions, ultraviolet–visible spectroscopy spectra and transmission electron microscopy images are used for characterization of AgNPs instrumentally in addition to the visual color change throughout the work. The work was further extended to study the application of the so prepared AgNPs on cotton fabric to see their suitability as antibacterial agent as well as their durability after certain washing cycles.

According to the current investigation, the optimal conditions for AgNPs formation of nearly 3–15 nm in size are 5 g/l, poly (MAA)–chitosan graft copolymer and 300 ppm AgNO₃ in addition to carrying out the reaction at 60°C for 30 min at pH 12. Besides, the application of the so prepared AgNPs on cotton fabric displayed a substantial reduction in antibacterial efficiency against gram-positive and gram-negative bacteria estimated even after 10 washing cycles in comparison with untreated one.

To the best of the authors’ information, no comprehensive study of the synthesis of AgNPs using poly (MAA)–chitosan graft copolymer with a graft yield of 48% has been identified in the literature.

This paper aims to focus on the aqueous extraction of natural dye from haematoxylum campechianum L. bark for finishing the bio-mordant cotton fabrics producing value-added, environment-friendly textile products, for biomedical applications.

The study focuses on the creation of eco-friendly bio-mordant cotton fabric using gallic acid and gelatin, Al³⁺ and Fe²⁺ salts and metal mordant. The optimal pH for extraction, structural characterization and phytochemical analysis of the extracted dye were estimated using UV-visible spectrophotometer, FTIR and qualitative analysis. Variations in electrolyte concentration and pH medium were also considered. The study also examines build-up properties, colorimetric values and fastness characteristics of the colored fabrics.

All the dyed fabrics exhibit very good to excellent in terms of antimicrobial resistance against S. aureus and C. allbicans.

Pre-mordant cotton fabrics with Fe²⁺ and a combination of metal and bio-mordant show higher antibacterial resistance against P. aerugionsa. Further, bio-mordant and a combination of both mordant exhibit excellent UV protection and antioxidant activity performance compared to that of undyed fabrics.

This work opens up a huge potential for producing healthy bioactive-colored fabrics used in medical textiles and other usages.

Titanium(IV) oxide nanoparticles (TiO₂ NP) were deposited to cotton denim fabrics using a self-crosslinking acrylate – a polymer dispersion to extend the lifetime of the products. This study aims to determine the optimum conditions to increase abrasion resistance, to provide self-cleaning properties of denim fabrics and to examine the effects of these applications on other physical properties.

The denim samples were first treated with nonionic surfactant to increase their wettability. Three different amounts of the polymer dispersion and two different pH levels were selected for the experimental design. The finishing process was applied to the fabrics with pad-dry-cure method.

The presence of the coatings and the adhesion of TiO₂ NPs to the surfaces were confirmed by scanning electron microscope and Fourier transform infrared spectroscopy analysis. It was ascertained that the most appropriate self-crosslinking acrylate amount and ambient pH level is 10 mL and “2”, respectively, for providing increased abrasion resistance (2,78%) and enhanced self-cleaning properties (363,4%) in the denim samples. The coating reduced the air permeability and softness of the denim samples. Differential scanning calorimetry and thermogravimetry analysis results showed that the treatments increased the crystallization temperatures and melting enthalpy values of the denim samples. Based on the thermal test results, it is clear that mass loss of the denim samples at 370°C decreased as the amount of self-crosslinking acrylate increased (at pH 3).

This study helped us to find out optimum amount of self-crosslinking acrylate and proper pH level for enhanced self-cleaning and abrasion strength on denim fabrics. With this finishing process, an environmentally friendly and long-life denim fabric was designed.

In this study, an eco-friendly cotton fabric (CF) treatment method was proposed to induce anti-ultraviolet and flame retardant properties, and a new application of tannic acid (TA) and phytic acid (PA) in ultraviolet protection and flame retardant fabric was put forward.

By combining diethylenetriamine, PA and TA on CF, a chemical reaction intumescent flame retardant CF with anti-ultraviolet and anti-flame retardance was developed.

The flame retardant and ultraviolet resistance of CF were characterized by LOI, vertical combustion, cone calorimetry and ultraviolet resistance testing. SEM, XPS, FTIR and other tests were used to analyze the chemical composition, surface morphology and residual carbon after combustion of the CF, and it was confirmed that the modified CF has good ultraviolet resistance and flame retardant performance.

In this study, an eco-friendly CF treatment method was proposed to induce anti-ultraviolet and flame retardant properties, and a new application of TA and PA in ultraviolet protection and flame retardant fabric was put forward.