Search results

Terrestrial laser scanning (TLS) point clouds have been widely used in deformation measurement for structures. However, reliability and accuracy of resulting deformation estimation strongly depends on quality of each step of a workflow, which are not fully addressed. This study aims to give insight error of these steps, and results of the study would be guidelines for a practical community to either develop a new workflow or refine an existing one of deformation estimation based on TLS point clouds. Thus, the main contributions of the paper are investigating point cloud registration error affecting resulting deformation estimation, identifying an appropriate segmentation method used to extract data points of a deformed surface, investigating a methodology to determine an un-deformed or a reference surface for estimating deformation, and proposing a methodology to minimize the impact of outlier, noisy data and/or mixed pixels on deformation estimation.

In practice, the quality of data point clouds and of surface extraction strongly impacts on resulting deformation estimation based on laser scanning point clouds, which can cause an incorrect decision on the state of the structure if uncertainty is available. In an effort to have more comprehensive insight into those impacts, this study addresses four issues: data errors due to data registration from multiple scanning stations (Issue 1), methods used to extract point clouds of structure surfaces (Issue 2), selection of the reference surface S_ref to measure deformation (Issue 3), and available outlier and/or mixed pixels (Issue 4). This investigation demonstrates through estimating deformation of the bridge abutment, building and an oil storage tank.

The study shows that both random sample consensus (RANSAC) and region growing–based methods [a cell-based/voxel-based region growing (CRG/VRG)] can be extracted data points of surfaces, but RANSAC is only applicable for a primary primitive surface (e.g. a plane in this study) subjected to a small deformation (case study 2 and 3) and cannot eliminate mixed pixels. On another hand, CRG and VRG impose a suitable method applied for deformed, free-form surfaces. In addition, in practice, a reference surface of a structure is mostly not available. The use of a fitting plane based on a point cloud of a current surface would cause unrealistic and inaccurate deformation because outlier data points and data points of damaged areas affect an accuracy of the fitting plane. This study would recommend the use of a reference surface determined based on a design concept/specification. A smoothing method with a spatial interval can be effectively minimize, negative impact of outlier, noisy data and/or mixed pixels on deformation estimation.

Due to difficulty in logistics, an independent measurement cannot be established to assess the deformation accuracy based on TLS data point cloud in the case studies of this research. However, common laser scanners using the time-of-flight or phase-shift principle provide point clouds with accuracy in the order of 1–6 mm, while the point clouds of triangulation scanners have sub-millimetre accuracy.

This study aims to give insight error of these steps, and the results of the study would be guidelines for a practical community to either develop a new workflow or refine an existing one of deformation estimation based on TLS point clouds.

The results of this study would provide guidelines for a practical community to either develop a new workflow or refine an existing one of deformation estimation based on TLS point clouds. A low-cost method can be applied for deformation analysis of the structure.

Although a large amount of the studies used laser scanning to measure structure deformation in the last two decades, the methods mainly applied were to measure change between two states (or epochs) of the structure surface and focused on quantifying deformation-based TLS point clouds. Those studies proved that a laser scanner could be an alternative unit to acquire spatial information for deformation monitoring. However, there are still challenges in establishing an appropriate procedure to collect a high quality of point clouds and develop methods to interpret the point clouds to obtain reliable and accurate deformation, when uncertainty, including data quality and reference information, is available. Therefore, this study demonstrates the impact of data quality in a term of point cloud registration error, selected methods for extracting point clouds of surfaces, identifying reference information, and available outlier, noisy data and/or mixed pixels on deformation estimation.

The purpose of this study is to examine the financial autonomy that affects the financial accounting information quality of public organizations. This study also tests the impact of the financial autonomy on support from leadership. How this impact has affected elements of accounting information systems such as hardware, software, communications technology and chief accountant to support providing the quality of the financial accounting information.

The research model is in the SEM form and measurement models are reflective scales so this study applies the PLS-SEM analysis technique on the Smart PLS 3.2.7 software to test the research hypotheses. Analytical data is collected through survey questionnaires with observed variables measured using the typical 7-point Likert scales. The result obtained after cleaning the data includes 164 Vietnamese public organizations with the different levels of the financial autonomy.

This research has three primary findings: firstly, FA has a positive direct effect on FAIQ and SL. Secondly, SL influences FAIQ through four mediate variables including AM, HW, SW and CN. Finally, SL also acts as a mediate variable in the relationship of FA and FAIQ.

This is one of the first empirical studies to examine the role of financial autonomy in leadership support to improve the quality of the accounting information in the public sector in the context of the Vietnamese government is promoting the financial autonomy of public organizations.

In the 1990s, following the challenges imposed by globalisation, the liner shipping industry experienced profound changes, leading major carriers to create ad-hoc logistics business-units. Nevertheless the vertical integration of shipping lines along the transport chain faced important entry barriers in various regions.This paper aims at analysing the impact of such barriers on carriers’ pathways of expansion in the logistics business. It mainly focuses on the East-Asian market, as a relevant empirical case in which important institutional and socio-political obstacles are still in force .Main results disclose sui-generis paths of expansion achieved by major carriers, in contrast with linear constructs of time and space proposed by classical TNC theories. In such respect, port operations reveal to be the most critical stage of the chain. The ‘sidestep’ of the port phase, leading to investments in other on-shore activities (warehousing, inland terminals, etc.) as well as the implementation of aggressive financial campaigns (acquisitions and takeovers), reveal the unfaltering will of top shipping lines: the quick achievement of a successful vertical and horizontal expansion despite environmental obstacles.

“The world needs science, science needs women” is the message given by UNESCO in the program for the development of women in science” (UNESCO, 2017). In Vietnam, women’s participation and achievements in scientific research is considered a great and important resource for industrialization and modernization. Even so, are there gender differences in scientific achievement in the social science research institutes in Vietnam? What factors influence the scientific achievement of female social researchers? The answers will be based on data from a 2017 survey with a sample of 756 researchers, of which 77.6% were female. The survey was conducted by the Vietnam Academy of Social Sciences, a leading, ministry-level national center for the social sciences in Vietnam. This chapter analyzed the scientific achievements of researchers through their position as principal investigators of research projects and their publications, and factors that may impact this. Bivariate and multivariate analyses of factors that may affect the scientific achievement of researchers found that gender differences in academic achievement in the social sciences in Vietnam was still prevalent. Female researchers’ scientific achievements were lower than those of their male counterparts. The contribution to science of Vietnamese female researchers was limited by many different factors; the most important were the academic rank of the researchers and gender stereotype that considered housework the responsibility of women.

This study investigates the impact of board independence on firm risk of Vietnamese listed firms and the moderating effect of capital expenditure on this relationship.

This paper applies fixed effects and dynamic generalized method of moments (GMM) models to examine hypothesized associations between the proportion of nonexecutive directors and stock return volatility, as well as the moderating effect of capital expenditure. The robustness tests are implemented by applying alternative measures of overinvestment and firm risk.

The results show that the presence of nonexecutive directors on board increases firm risk. However, the combination of nonexecutive ratio and capital expenditure ratio has a significant negative impact on firm risk. The result is also confirmed by the difference between the monitoring role of nonexecutive directors in overinvesting and underinvesting firms.

The results imply that Vietnamese listed firms take stock return volatility into consideration before nominating and appointing nonexecutive directors into their board, especially in overinvesting firms. From another perspective, the shift toward having a majority of nonexecutive directors on boards can play a significant role in pursuing a stable or risky business strategy.

This paper investigates the influences of nonexecutive directors on firm risk in the context of Vietnam.

Mitigating the energy trilemma (ET) is of great importance for dealing with climate change and realizing carbon neutrality. To this end, effectively assessing the level of the ET is essential. The purpose of this study is to evaluate the current situation and the spatio-temporal changes of the ET in the whole of China.

Moreover, based on provincial-level data in China for the period 2002–2017, and by using the dynamic estimation model, we aim to determine the specific marginal impacts of smart transportation (ST) on the ET, and the possible channels through which ST works on the ET.

We thus present the following findings: (1) The performance of both ET and its three pillars is gradually improving in China. Moreover, the situation tends to vary dramatically among various regions and provinces, and the gap between the best performers and the worst is large. (2) ST plays a significant role in inhibiting the ET, a finding that remains robust after a series of tests. And (3) the ET eradication effect of ST is caused mainly by improved innovation, advanced technical efficiency, and the increasing energy scale.

Accordingly, we put forward some policy recommendations to help tackle ET and accelerate ST in China.

Building on a stress-related view, this study examines the impact of qualitative job insecurity on three indicators of career sustainability. It also examines the moderating role of employee age in this relationship.

Dutch respondents (N = 398) working in various sectors responded to an online survey. Our hypotheses were tested using path modeling with Mplus.

Qualitative job insecurity was negatively related to job satisfaction, general health, and employability. Moreover, a moderating effect of employee age on the relationship between qualitative job insecurity and job satisfaction was found.

Organizations need to take measures to prevent qualitative job insecurity, as this appears to be an essential hindering factor that might endanger an employee's career sustainability. Especially younger workers (<40 years) seem to suffer from qualitative job insecurity as this decreases their job satisfaction, urging management and HR professionals to protect them against it.

By focusing on qualitative job insecurity, this study helps to close an essential gap in the literature that so far has mainly focused on quantitative job insecurity. Besides, this is the very first empirical work investigating the link between qualitative job insecurity and multiple indicators of career sustainability. Finally, this research adds a developmental approach to sustainable careers by comparing younger and older workers.

The physical internet (PI) is an emerging logistics and supply chain management (SCM) concept that draws on different technologies and areas of research, such as the Internet of Things (IoT) and key performance indicators, with the purpose of revolutionizing existing logistics and SCM practices. The growing literature on the PI and its noteworthy potential to be a disruptive innovation in the logistics industry call for a systematic literature review (SLR), which we conducted that defines the current state of the literature and outlines future research directions and approaches.

The SLR that was undertaken included journal publications, conference papers and proceedings, book excerpts, industry reports and white papers. We conducted descriptive, citation, thematic and methodological analyses to understand the evolution of PI literature.

Based on the literature review and analyses, we proposed a comprehensive framework that structures the PI domain and outlines future directions for logistics and SCM researchers.

Our research findings are limited by the relatively low number of journal publications, as the PI is a new field of inquiry that is composed primarily of conference papers and proceedings.

The proposed PI-based framework identifies seven PI themes, including the respective facilitators and barriers, which can inform researchers and practitioners on future potentially disruptive SC strategies.