Search results

Emissions produced by oceangoing vessels not only negatively affect the environment but also may deteriorate health of living organisms. Several regulations were released by the International Maritime Organization (IMO) to alleviate negative externalities from maritime transportation. Certain polluted areas were designated as “Emission Control Areas” (ECAs). However, IMO did not enforce any restrictions on the actual quantity of emissions that could be produced within ECAs. This paper aims to perform a comprehensive assessment of advantages and disadvantages from introducing restrictions on the emissions produced within ECAs. Two mixed-integer non-linear mathematical programs are presented to model the existing IMO regulations and an alternative policy, which along with the established IMO requirements also enforces restrictions on the quantity of emissions produced within ECAs. A set of linearization techniques are applied to linearize both models, which are further solved using the dynamic secant approximation procedure. Numerical experiments demonstrate that introduction of emission restrictions within ECAs can significantly reduce pollution levels but may incur increasing route service cost for the liner shipping company.

Two mixed-integer non-linear mathematical programs are presented to model the existing IMO regulations and an alternative policy, which along with the established IMO requirements also enforces restrictions on the quantity of emissions produced within ECAs. A set of linearization techniques are applied to linearize both models, which are further solved using the dynamic secant approximation procedure.

Numerical experiments were conducted for the French Asia Line 3 route, served by CMA CGM liner shipping company and passing through ECAs with sulfur oxide control. It was found that introduction of emission restrictions reduced the quantity of sulfur dioxide emissions produced by 40.4 per cent. In the meantime, emission restrictions required the liner shipping company to decrease the vessel sailing speed not only at voyage legs within ECAs but also at the adjacent voyage legs, which increased the total vessel turnaround time and in turn increased the total route service cost by 7.8 per cent.

This study does not capture uncertainty in liner shipping operations.

The developed mathematical model can serve as an efficient practical tool for liner shipping companies in developing green vessel schedules, enhancing energy efficiency and improving environmental sustainability.

Researchers and practitioners seek for new mathematical models and environmental policies that may alleviate pollution from oceangoing vessels and improve energy efficiency. This study proposes two novel mathematical models for the green vessel scheduling problem in a liner shipping route with ECAs. The first model is based on the existing IMO regulations, whereas the second one along with the established IMO requirements enforces emission restrictions within ECAs. Extensive numerical experiments are performed to assess advantages and disadvantages from introducing emission restrictions within ECAs.

This paper aims to examine containership routing and speed optimization for maritime liner services. It focuses on a realistic case in which the transport demand, and consequently the collected revenue from the visited ports depend on the sailing speed.

The authors present an integer non-linear programming model for the containership routing and fleet sizing problem, in which the sailing speed of every leg, the ports to be included in the service and their sequence are optimized based on the net line's profit. The authors present a heuristic approach that is based on speed discretization and a genetic algorithm to solve the problem for large size instances. They present an application on a line provided by COSCO in 2017 between Asia and Europe.

The numerical results show that the proposed heuristic approach provides good quality solutions after a reasonable computation time. In addition, the demand sensitivity has a great impact on the selected route and therefore the profit function. Moreover, the more the demand is sensitive to the sailing speed, the higher the sailing speed value.

The vessel carrying capacity is not considered in an explicit way.

This paper focuses on an important aspect in liner shipping, i.e. demand sensitivity to sailing speed. It brings a novel approach that is important in a context in which sailing speed strategies and market volatility are to be considered together in network design. This perspective has not been addressed previously.

Temperature is an important load for a ballastless track. However, little research has been conducted on the dynamic responses when a train travels on a ballastless track under the temperature gradient. The dynamic responses under different temperature gradients of the slab are theoretically investigated in this work.

Considering the moving train, the temperature gradient of the slab, and the gravity of the slab track, a dynamic model for a high-speed train that runs along the CRTS III slab track on subgrade is developed by a nonlinear coupled way in Abaqus.

The results are as follows: (1) The upward transmission of the periodic deformation of the slab causes periodic track irregularity. (2) Because of the geometric constraint of limiting structures, the maximum bending stresses of the slab occur near the end of the slab under positive temperature gradients, but in the middle of the slab under negative temperature gradients. (3) The periodic deformation of the slab can induce periodic changes in the interlayer stiffness and contact status, leading to a large vibration of the slab. Because of the vibration-reduction capacity of the fastener and the larger mass of the concrete base, the accelerations of both the slab and concrete base are far less than the acceleration of the rail.

This study reveals the influence mechanism of temperature gradient-induced periodic deformation in the dynamic responses of the train-track system, and it also provides a guide for the safe service of CRTS III slab track.

This study aims to propose a centralized optimal control model for automated left-turn platoon at contraflow left-turn lane (CLL) intersections.

The lateral lane change control and the longitudinal acceleration in the control horizon are optimized simultaneously with the objective of maximizing traffic efficiency and smoothness. The proposed model is cast into a mixed-integer linear programming problem and then solved by the branch-and-bound technique.

The proposed model has a promising control effect under different geometric controlled conditions. Moreover, the proposed model performs robustly under various safety time headways, lengths of the CLL and green times of the main signal.

This study proposed a centralized optimal control model for automated left-turn platoon at CLL intersections. The lateral lane change control and the longitudinal acceleration in the control horizon are optimized simultaneously with the objective of maximizing traffic efficiency and smoothness

This paper aims to conduct a review on cruise shipping and the cruise shipping industry. The current trends are analyzed for the industry, showing that this industry is still young and has great potential to boom. Meanwhile, the Asia market is the fastest growth region among the global, to which increasing cruise ships are repositioned by major cruise lines. However, for such a promising industry, the literature review on some state-of-the-art research works suggests that the research works that have been conducted for the cruise shipping are quite limited, and the majority of the works belongs to empirical and descriptive studies, which does not provide optimization-based quantitative analysis on some operation planning problems.

This paper conducts a review on cruise shipping and the cruise shipping industry.

In reality, there are some important operation planning problems faced by cruise lines or cruise ships, and four of them are addressed in this paper in response to the fast growing trend. The addressed operation planning problems are cruise fleet management, cruise ship deployment, cruise itinerary design and cruise service planning.

The importance and the attention for the research on the problems are also elaborated in the paper.

This study intends to explore the connection between Facebook-based social media marketing (FSMM) and Facebook-based online purchase order (FOPO) for 20 popular online fashion retail brands across three South Asian countries: India, Pakistan and Bangladesh. FSMM was further divided into four components: Perceived trust (PT), Perceived informativeness (PInf), Perceived interactivity (PInt) and Perceived benefit (PB). 

The authors selected 20 popular Facebook-based online fashion brands involved in clothing and fashion accessories businesses in those three countries. Later, the authors purposively selected 114 region-based Facebook page administrators (admins) responsible for operating those brands' Facebook pages and taking Facebook-based online orders. The authors collected primary data from those admins as respondents through a structured survey instrument. The authors applied SPSS 25 for descriptive analysis and a covariance-based structural equation modeling (CB-SEM) (through AMOS 25) for testing the hypothesized relations.

Based on the valid responses and application of proper statistical measures, it was revealed that three FSMM components: PT, PInf and PB have significant positive relationships with FOPO, while PInt has an insignificant relationship with FOPO. 

South Asia is a growing business hub and the largest consumer market in terms of population. This study was conducted to identify the relationship between FSMM and FOPO in the three most prominent South Asian countries. As the first study was undertaken ever on customer perceptions of FSMM in a multi-country South Asian context, this paper is expected to be helpful for academics in conducting further empirical investigations on Facebook-based marketing as well as practitioners and policymakers in formulating and implementing Facebook-based marketing strategies.

Intuitionistic linguistic fuzzy information (ILFI), characterized by linguistic terms and intuitionistic fuzzy sets (IFSs), can easily express the fuzzy information in the process of muticriteria decision making (MCDM) and muticriteria group decision making (MCGDM) problems. The purpose of this paper is to provide an overview of aggregation operators (AOs) and applications of ILFI.

First, some meaningful AOs for ILFI are summarized, and some extended MCDM approaches for intuitionistic uncertain linguistic variables (IULVs), such as extended TOPSIS, extended TODIM, extended VIKOR, are discussed. Then, the authors summarize and analyze the applications about the AOs of IULVs.

IULVs, characterized by linguistic terms and IFSs, can more detailed and comprehensively express the criteria values in the process of MCDM and MCGDM. Therefore, lots of researchers pay more and more attention to the MCDM or MCGDM methods with IULVs.

The authors summarize and analyze the applications about the AOs of IULVs Finally, the authors point out some possible directions for future research.

Following Hovland’s persuasion theory, this paper aims to develop a conceptual model and analyzes characteristics of online political deliberation behavior from three aspects (i.e. information, situation and manager). Based on the whole interactive process of online political deliberation, this paper aims to reveal the key points that affect the response effect of the government from the persuasive perspective of online political consultation.

Based on more than 40,000 netizens’ posts and government responses from 2011 to the first half of 2019 of the Chinese political platform, this paper used the text analysis and machine learning methods to extract measurement variables of online political deliberation characteristics and the econometrics analysis method to conduct empirical research.

The results showed that the textual information, political environment and identity of the political objects affect the effectiveness of government response. Furthermore, for different position categories of political officials, the length of political texts, topic categories and emotional tendencies have different effects on the response effectiveness. Additionally, the effect of political time on the effectiveness of response differs.

The findings will help ascertain the characteristics of online political deliberation behavior that affect how effective government response is and provide a theoretical basis for why the public should express their political concerns.

In order to solve the problems faced by First Order Reliability Method (FORM) and First Order Saddlepoint Approximation (FOSA) in structural reliability optimization, this paper aims to propose a new Reliability-based Design Optimization (RBDO) strategy for offshore engineering structures based on Original Probabilistic Model (OPM) decoupling strategy. The application of this innovative technique to other maritime structures has the potential to substantially improve their design process by optimizing cost and enhancing structural reliability.

In the strategy proposed by this paper, sequential optimization and reliability assessment method and surrogate model are used to improve the efficiency for solving RBDO. The strategy is applied to the analysis of two marine engineering structure cases of ship cargo hold structure and frame ring of underwater skirt pile gripper. The effectiveness of the method is proved by comparing the original design and the optimized results.

In this paper, the proposed new RBDO strategy is used to optimize the design of the ship cargo hold structure and the frame ring of the underwater skirt pile gripper. According to the results obtained, compared with the original design, the structure of optimization design has better reliability and stability, and reduces the risk of failure. This optimization can also better balance the relationship between performance and cost. Therefore, it is recommended for related RBDO problems in the field of marine engineering.

In view of the limitations of FORM and FOSA that may produce multiple MPPs for a single performance function, the new RBDO strategy proposed in this study provides valuable insights and robust methods for the optimization design of offshore engineering structures. It emphasizes the importance of combining advanced MPP search technology and integrating SORA and surrogate models to achieve more economical and reliable design.