Search results

This study aims to propose a framework for the development of implementation guidelines (IGs) that can help consultants mitigate not-invented-here (NIH) syndrome during a consultant intervention as a specific type of knowledge transfer.

The authors adopted a design science research approach for proposing an NIH-mitigating IG development framework. Inspired by findings and rich primary data from two consultant interventions, the authors, through theory building, ground five core principles in the general theory of NIH attitude functions. Finally, the authors revisit two consultant interventions to identify and describe mechanisms that led to the enactment of the principles.

The proposed framework provides five principles for developing NIH-mitigating IGs. The present research proposes that successful knowledge transfer and the mitigation of NIH syndrome as a prerequisite for this success are conditioned by adequately developed IGs.

The originality and value of the present research lie in the proposed NIH-mitigating IG development framework containing a set of principles for IG development as a proactive rather than reactive approach to NIH mitigation. To the best of the authors’ knowledge, this is the first research to address the problematics of mitigating NIH syndrome in consultant knowledge transfer by focusing on developing appropriate IGs. By developing and implementing IGs based on the proposed framework, a more successful transfer of knowledge from consultants to clients should take place, thus, increasing the value that clients receive from consultancy.

This paper aims to explore the intellectual structure shaping the circular economy (CE) discourse within the built environment in Africa.

The study adopted a bibliometric analysis approach to explore the intellectual structure of CE in the built environment in Africa. The authors collected 31 papers published between 2005 and 2021 from the Scopus database and used VOSviewer for data analysis.

The findings show that there are six clusters shaping the intellectual structure: demolition, material recovery and reuse; waste as a resource; cellulose and agro-based materials; resilience and low-carbon footprint; recycling materials; and the fourth industrial revolution. The two most cited scholars had three publications each, while the top journal was Resources, Conservation and Recycling. The dominant concepts included CE, sustainability, alternative materials, waste management, lifecycle, demolition and climate change. The study concludes that there is low CE research output in Africa, which implies that the concept is either novel or facing resistance.

The data were drawn from one database, Scopus; hence, adoption of alternative databases such as Web of Science, Google Scholar and Dimensions could potentially have yielded a higher number of articles for analysis which potentially would result in different conclusions on the subject understudy.

This study made a significant contribution by articulating the CE intellectual structure in the built environment, identified prominent scholars and academic platforms responsible for promoting circularity in Africa.

This study presents the applicability of a model-based approach for loyalty program forecasting using smartphone app in the digital strategy of the retail industry.

The authors develop a dynamic model with the cyclical structure of customer segments through customer experience. They use time-series data on the number of members of the loyalty program, “Seven Mile Program” and confirm the validity of the approximate calculation of customer segment share, customer segment sales share and aggregate sales performance. The authors present three medium-term forecast scenarios after the launch of a smartphone payment service linked with the loyalty program.

The sum of the two customer segment shares for forecasting (the sum of the quasi-excellent and excellent customer ratios) is about 30% in each scenario, consistent with an essential customer loyalty (true loyalty) share obtained in the existing empirical study.

Digital strategy in the retail industry should focus more on estimating and forecasting average amounts of customer segments and the number of aggregated customers through the digitalization on the customer side than on individual customer journeys and responses.

Multi-scenario evaluation through simulation of dynamic models from a systemic view can be used for decision-making in retailing digital strategies.

This study builds a model that integrates the cyclicality of customer segment transition through customer experiences into a loyalty matrix framework, which is a method that has previously been used in the hospitality industry.

The study examines the remote integration process of advanced manufacturing technology (AMT) into the production system and identifies key challenges and mitigating actions for a smoother introduction and integration process.

The study adopts a case study approach to a cyber-physical production system at an industrial technology center using a mobile robot as an AMT.

By applying the plug-and-produce concept, the study exemplifies an AMT's remote integration process into a cyber-physical production system in nine steps. Eleven key challenges and twelve mitigation actions for remote integration are described based on technology–organization–environment theory. Finally, a remote integration framework is proposed to facilitate AMT integration into production systems.

The study presents results purely from a practical perspective, which could reduce dilemmas in early decision-making related to smart production. The proposed framework can improve flexibility and decrease the time needed to configure new AMTs in existing production systems.

The area of remote integration for AMT has not been addressed in depth before. The consequences of lacking in-depth studies for remote integration imply that current implementation processes do not match the needs and the existing situation in the industry and often underestimate the complexity of considering both technological and organizational issues. The new integrated framework can already be deployed by industry professionals in their efforts to integrate new technologies with shorter time to volume and increased quality but also as a means for training employees in critical competencies required for remote integration.

The purpose of this paper was to assess and determine the impact of the five core technologies of Industry 4.0 (3D Printing, Big Data Analytics, Cloud Computing, Internet of Things (IoT) and Robotics) on the organizational performance of the retail industry in the context of Pakistan.

Pakistan's retail industry was chosen as the target sector, and the target population was composed of senior-level employees, including managers from first-level positions to top-level positions, as well as subordinate employees working under the supervision of first-level managers, possessing the technological know-how of Industry 4.0. The data were collected through a matrix-based survey questionnaire that was based on a five-point Likert scale, ranging from “strongly agree” to “strongly disagree.” The process of data analysis was conducted using IBM SPSS Statistics.

The findings obtained by this research work showed a significant relationship among the five core pillars of Industry 4.0 and the organizational performance of Pakistan's retail industry. Besides, the obtained findings provided preliminary evidence that Industry 4.0's disruptive technologies, particularly, 3D printing, big data analytics, cloud computing, IoT and robotics, could help Pakistan's retail industry solve various problems and challenges, such as meager revenues, increased expenses and unorganized systems.

The present study extended the theoretical body of knowledge through studying and examining Industry 4.0's five crucial factors that significantly contribute to the service sector, particularly, the retail industry, of the big emerging markets (BEM) economies, including Pakistan.

Existing research evidence shows a fragmented understanding of the roles of first-line employees (FLEs) as essential factors for successful lean implementation in small- and medium-sized enterprises (SMEs), provoking recent calls for additional research on the identification of enablers and barriers for lean acceptance among workers. Therefore, this paper aims to identify related enablers and barriers to lean implementation among FLEs and determine future research avenues for improving the understanding of lean methodology implementation in SMEs.

Relying on a systematic literature review methodology, the authors aimed to synthesize and evaluate available peer-reviewed papers on the role of FLEs in lean implementation in SMEs. General descriptive and thematic analysis comprehensively depicted the selected research topic and identified the main themes within collected papers and potential future research questions.

The authors identified four main themes related to FLEs’ role in lean implementation: cultural change factors, employee characteristics, management involvement and lean job design. Within each theme, the authors present a comprehensive overview of FLE-related factors and associated enablers and barriers that should be considered for a successful lean implementation in SMEs.

The research outcomes are important to practicing managers in SMEs, helping them facilitate lean acceptance and enhance the likelihood of successful lean implementation.

The insights from this study present building blocks in developing a lean implementation model for SMEs that considers the FLEs’ role more comprehensively.

The purpose of the study was to investigate the alignment between current product and manufacturing systems and how it could be achieved.

Case study research method was chosen for the collection and analysis of empirical data. The data was of qualitative nature and was collected using research techniques such as observations through video recordings of processes, documents and open and semi-structured interviews.

The variation of outer side sub-element of the exterior wall element was found to not be aligned with its corresponding assembly. A hybrid assembly of outer side sub-elements characterised by flexibility and reconfigurability can be developed.

The study is limited to the exterior wall element and corresponding manufacturing system.

The presented approach was formulated with the aim to be used both for the analysis of existing products and manufacturing systems as well as for the design of new manufacturing systems.

So far, this is the first study in the context of timber house building where the alignment between product and manufacturing systems was investigated by considering product variety and flexibility of manufacturing systems.

The purpose of this paper is to investigate and quantify the impact of product complexity, including architectural complexity, on operator learning, productivity and quality performance in both assembly and disassembly operations. This topic has not been extensively investigated in previous research.

An extensive experimental campaign involving 84 operators was conducted to repeatedly assemble and disassemble six different products of varying complexity to construct productivity and quality learning curves. Data from the experiment were analysed using statistical methods.

The human learning factor of productivity increases superlinearly with the increasing architectural complexity of products, i.e. from centralised to distributed architectures, both in assembly and disassembly, regardless of the level of overall product complexity. On the other hand, the human learning factor of quality performance decreases superlinearly as the architectural complexity of products increases. The intrinsic characteristics of product architecture are the reasons for this difference in learning factor.

The results of the study suggest that considering product complexity, particularly architectural complexity, in the design and planning of manufacturing processes can optimise operator learning, productivity and quality performance, and inform decisions about improving manufacturing operations.

While previous research has focussed on the effects of complexity on process time and defect generation, this study is amongst the first to investigate and quantify the effects of product complexity, including architectural complexity, on operator learning using an extensive experimental campaign.

In manufacturing, dedicated machine tools and flexible machine tools are failing to satisfy the ever-changing manufacturing demands of short life cycles and dynamic nature of products. These machines are limited when new product designs are introduced. The solution lies in developing responsive machines that can be adjusted or be changed functionally when these change requirements arise. These machines are reconfigurable machines which are becoming the new focus, as they rapidly respond to product variety and volume changes. A sheet metal working machine known as a reconfigurable guillotine shear and bending press machine (RGS&BPM) has been developed. The purpose of this paper is to present a methodology, function-oriented design approach (FODA), which was developed for the design of the RGS&BPM.

The design of the machine is based on the six principles of reconfigurable manufacturing systems (RMSs), namely, modularity, scalability integrability, convertibility, diagnosability and customisability. The methodology seeks to optimise the design process of the RGS&BPM through a design of modules that make up the machine, enable its conversion and reconfiguration. The FODA is focussed on function identification to select the operational function required. Two main functions are recognised for the machine, these being cutting and bending; hence, the design revolves around these two and reconfigurability.

The developed design methodology was tested in the design of a prototype for the reconfigurable guillotine shear and bending press machine. The prototype is currently being manufactured and will be subjected to functional tests once completed. This paper is being presented not only to present the methodology by to show and highlight its practical applicability, as the prototype manufacturers have been enthusiastic about this new approach.

The research was limited to the design methodology for the RGS&BPM, the machine which has been designed to completion using this methodology, with prototype being manufactured.

This study presents critical steps and considerations in the development of reconfigurable machines. The main thrust being to explore the best possibility of developing the machines with dual functionality that will assist in availing the technology to manufacturer. As the machine has been development, the success of the design can be directly attributed to the FODA methodology, among other contributing factors. It also highlights the significance of the principles of RMS in reconfigurable machine design.

The RGS&BM machine is an answer for the small-to-medium enterprises (SMEs), as the machine replaces two machines with one, and the methodology ensures its affordable design. It contributes immensely to the machine availability by eliminating trial and error approaches.

This study presents a new approach to the design of reconfigurable dual machines using principles of RMS. As the targeted market is the SME, it is not limited to that as any entrepreneur may use the machine to their advantage. The design methodology presented contributes to the body of knowledge in dual reconfigurable machine tool design.