Search results

This paper studies the lateral stability regulation of intelligent electric vehicle (EV) based on model predictive control (MPC) algorithm.

Firstly, the bicycle model is adopted in the system modelling process. To improve the accuracy, the lateral stiffness of front and rear tire is estimated using the real-time yaw rate acceleration and lateral acceleration of the vehicle based on the vehicle dynamics. Then the constraint of input and output in the model predictive controller is designed. Soft constraints on the lateral speed of the vehicle are designed to guarantee the solved persistent feasibility and enforce the vehicle’s sideslip angle within a safety range.

The simulation results show that the proposed lateral stability controller based on the MPC algorithm can improve the handling and stability performance of the vehicle under complex working conditions.

The MPC schema and the objective function are established. The integrated active front steering/direct yaw moments control strategy is simultaneously adopted in the model. The vehicle’s sideslip angle is chosen as the constraint and is controlled in stable range. The online estimation of tire stiffness is performed. The vehicle’s lateral acceleration and the yaw rate acceleration are modelled into the two-degree-of-freedom equation to solve the tire cornering stiffness in real time. This can ensure the accuracy of model.

Global climate change characterized by an increase in temperature has become the focus of attention all over the world. China is a sensitive and significant area of global climate change. This paper specifically aims to examine the association between agricultural productivity and the climate change by using China’s provincial agricultural input–output data from 2000 to 2019 and the climatic data of the ground meteorological stations.

The authors used the three-stage spatial Durbin model (SDM) model and entropy method for analysis of collected data; further, the authors also empirically tested the climate change marginal effect on agricultural productivity by using ordinary least square and SDM approaches.

The results revealed that climate change has a significant negative effect on agricultural productivity, which showed significance in robustness tests, including index replacement, quantile regression and tail reduction. The results of this study also indicated that by subdividing the climatic factors, annual precipitation had no significant impact on the growth of agricultural productivity; further, other climatic variables, including wind speed and temperature, had a substantial adverse effect on agricultural productivity. The heterogeneity test showed that climatic changes ominously hinder agricultural productivity growth only in the western region of China, and in the eastern and central regions, climate change had no effect.

The findings of this study highlight the importance of various social connections of farm households in designing policies to improve their responses to climate change and expand land productivity in different regions. The study also provides a hypothetical approach to prioritize developing regions that need proper attention to improve crop productivity.

The paper explores the impact of climate change on agricultural productivity by using the climatic data of China. Empirical evidence previously missing in the body of knowledge will support governments and researchers to establish a mechanism to improve climate change mitigation tools in China.

This study proposes a deep learning algorithm-based model to predict the repair and maintenance costs of apartment buildings, by collecting repair and maintenance cost data that were incurred in an actual apartment complex. More specifically, a long short-term memory (LSTM) algorithm was adopted to develop the prediction model, while the robustness of the model was verified by recurrent neural networks (RNN) and gated recurrent units (GRU) models.

Repair and maintenance cost data incurred in actual apartment complexes is collected, along with various input variables, such as repair and maintenance timing (calendar year), usage types, building ages, temperature, precipitation, wind speed, humidity and solar radiation. Then, the LSTM algorithm is employed to predict the costs, while two other learning models (RNN and GRU) are taught to validate the robustness of the LSTM model based on R-squared values, mean absolute errors and root mean square errors.

The LSTM model’s learning is more accurate and reliable to predict repair and maintenance costs of apartment complex, compared to the RNN and GRU models’ learning performance. The proposed model provides a valuable tool that can contribute to mitigating financial management risks and reducing losses in forthcoming apartment construction projects.

Gathering a real-world high-quality data set of apartment’s repair and maintenance costs, this study provides a highly reliable prediction model that can respond to various scenarios to help apartment complex managers plan resources more efficiently, and manage the budget required for repair and maintenance more effectively.

This paper comprehensively addresses the influence of chopped strand mat glass fiber-reinforced polymer (GFRP) patch configurations such as geometry, dimensions, position and the number of layers of patches, whether a single or double patch is used and how well debonding the area under the patch improves the strength of the cracked aluminum plates with different crack lengths.

Single-edge cracked aluminum specimens of 150 mm in length and 50 mm in width were tested using the tensile test. The cracked aluminum specimens were then repaired using GFRP patches with various configurations. A three-dimensional (3D) finite element method (FEM) was adopted to simulate the repaired cracked aluminum plates using composite patches to obtain the stress intensity factor (SIF). The numerical modeling and validation of ABAQUS software and the contour integral method for SIF calculations provide a valuable tool for further investigation and design optimization.

The width of the GFRP patches affected the efficiency of the rehabilitated cracked aluminum plate. Increasing patch width WP from 5 mm to 15 mm increases the peak load by 9.7 and 17.5%, respectively, if compared with the specimen without the patch. The efficiency of the GFRP patch in reducing the SIF increased as the number of layers increased, i.e. the maximum load was enhanced by 5%.

This study assessed repairing metallic structures using the chopped strand mat GFRP. Furthermore, it demonstrated the superiority of rectangular patches over semicircular ones, along with the benefit of using double patches for out-of-plane bending prevention and it emphasizes the detrimental effect of defects in the bonding area between the patch and the cracked component. This underlines the importance of proper surface preparation and bonding techniques for successful repair.

This paper provides practical advice for archaeologists and heritage specialists wishing to use ML approaches to identify archaeological features in high-resolution satellite imagery (or other remotely sensed data sources). We seek to balance the disproportionately optimistic literature related to the application of ML to archaeological prospection through a discussion of limitations, challenges and other difficulties. We further seek to raise awareness among researchers of the time, effort, expertise and resources necessary to implement ML successfully, so that they can make an informed choice between ML and manual inspection approaches.

Automated object detection has been the holy grail of archaeological remote sensing for the last two decades. Machine learning (ML) models have proven able to detect uniform features across a consistent background, but more variegated imagery remains a challenge. We set out to detect burial mounds in satellite imagery from a diverse landscape in Central Bulgaria using a pre-trained Convolutional Neural Network (CNN) plus additional but low-touch training to improve performance. Training was accomplished using MOUND/NOT MOUND cutouts, and the model assessed arbitrary tiles of the same size from the image. Results were assessed using field data.

Validation of results against field data showed that self-reported success rates were misleadingly high, and that the model was misidentifying most features. Setting an identification threshold at 60% probability, and noting that we used an approach where the CNN assessed tiles of a fixed size, tile-based false negative rates were 95–96%, false positive rates were 87–95% of tagged tiles, while true positives were only 5–13%. Counterintuitively, the model provided with training data selected for highly visible mounds (rather than all mounds) performed worse. Development of the model, meanwhile, required approximately 135 person-hours of work.

Our attempt to deploy a pre-trained CNN demonstrates the limitations of this approach when it is used to detect varied features of different sizes within a heterogeneous landscape that contains confounding natural and modern features, such as roads, forests and field boundaries. The model has detected incidental features rather than the mounds themselves, making external validation with field data an essential part of CNN workflows. Correcting the model would require refining the training data as well as adopting different approaches to model choice and execution, raising the computational requirements beyond the level of most cultural heritage practitioners.

Improving the pre-trained model’s performance would require considerable time and resources, on top of the time already invested. The degree of manual intervention required – particularly around the subsetting and annotation of training data – is so significant that it raises the question of whether it would be more efficient to identify all of the mounds manually, either through brute-force inspection by experts or by crowdsourcing the analysis to trained – or even untrained – volunteers. Researchers and heritage specialists seeking efficient methods for extracting features from remotely sensed data should weigh the costs and benefits of ML versus manual approaches carefully.

Our literature review indicates that use of artificial intelligence (AI) and ML approaches to archaeological prospection have grown exponentially in the past decade, approaching adoption levels associated with “crossing the chasm” from innovators and early adopters to the majority of researchers. The literature itself, however, is overwhelmingly positive, reflecting some combination of publication bias and a rhetoric of unconditional success. This paper presents the failure of a good-faith attempt to utilise these approaches as a counterbalance and cautionary tale to potential adopters of the technology. Early-majority adopters may find ML difficult to implement effectively in real-life scenarios.

Unlike many high-profile reports from well-funded projects, our paper represents a serious but modestly resourced attempt to apply an ML approach to archaeological remote sensing, using techniques like transfer learning that are promoted as solutions to time and cost problems associated with, e.g. annotating and manipulating training data. While the majority of articles uncritically promote ML, or only discuss how challenges were overcome, our paper investigates how – despite reasonable self-reported scores – the model failed to locate the target features when compared to field data. We also present time, expertise and resourcing requirements, a rarity in ML-for-archaeology publications.

The purpose of this paper is to show that the environmental income drives economic growth of a large open country.

The authors detect that the relative environmental income has double effect of “conspicuous consumption” on the international renewable resource stock changes when a new social norm shapes to environmental-friendly behaviors by using normal macroeconomic approaches.

Every unit of extra demand for renewable resource consumption increases the net premium of domestic capital asset. Even if the technology spillovers are inefficient to the substitution of capital to labor force in a real business cycle, the relative income with scale effect increases drives savings to investment. In this case, the renewable resource consumption promotes both the reproduction to a higher level and saving the potential cost of environmental improvement. Even if without scale effects, the loss of technology inefficient can be compensated by net positive consumption externality for economic growth in a sustainable manner.

It implies how to earn the environment income determines the future pathway of China’s rural conversion to the era of eco-urbanization.

We test the tax incidence to demonstrate an experimental taxation for environmental improvement ultimately burdens on international consumption side.

The paper aims to investigate the possible changes in mean temperature in the Mongolian Plateau associated with the 1.5 and 2°C global warming targets and how snow changes in the Mongolian Plateau when the mean global warming is well below 2°C or limited to 1.5°C.

In total, 30 model simulations of consecutive temperature and precipitation days from Coupled Model Inter-comparison Project Phase 5 (CMIP5) are assessed in comparison with the 111 meteorological monitoring stations from 1961–2005. Multi-model ensemble and model relative error were used to evaluate the performance of CMIP5 models. Slope and the Mann–Kendall test were used to analyze the magnitude of the trends and evaluate the significance of trends of snow depth (SD) from 1981 to 2014 in the Mongolian Plateau.

Some models perform well, even better than the majority (80%) of the models over the Mongolian Plateau, particularly HadGEM2-CC, CMCC-CM, BNU-ESM and GFDL-ESM2M, which simulate best in consecutive dry days (CDD), consecutive wet days (CWD), cold spell duration indicator (CSDI) and warm spell duration indicator (WSDI), respectively. Emphasis zones of WSDI on SD were deeply analysed in the 1.5 and 2 °C global warming period above pre-industrial conditions, because it alone has a significant negative relation with SD among the four indices. It is warmer than before in the Mongolian Plateau, particularly in the southern part of the Mongolian Plateau, indicating less SD.

Providing climate extremes and SD data sets with different spatial-temporal scales over the Mongolian Plateau. Zoning SD potential risk areas and proposing adaptations to promote regional sustainable development.