Search results

This study aims to focus on the optimal green R&D of a capital-constrained supply chain under different channel power structures as well as the impact of capital constraint, financing cost, channel power structure and cost-reducing efficiency on green R&D and supply chain profitability.

A two-echelon supply chain is considered. The upstream firm engages in green R&D but has capital constraints that can be overcome by external financing. Green R&D is beneficial to reduce production costs and increase consumer demand. Based on whether or not the upstream firm is capital constrained and dominates the supply chain, four models are developed.

Capital constraints significantly lower green R&D and supply chain profitability. Transferring leadership from the upstream to the downstream firms leads to higher green R&D levels and downstream firm profitability, whereas the upstream firm's profitability is increased (decreased) if green R&D investment efficiency is high (low) enough. Greater financing costs reduce green R&D and downstream firm profitability; however, the upstream firm's profitability under the model in which it functions as the follower increases if the initial capital is sufficient. More importantly, empirical analysis based on practice data is used to verify the theoretical results reported above.

This study reveals how upstream firms in supply chains decide green R&D decisions in situations with capital constraints, providing managers and governments with an understanding of the impact of capital constraint, channel power structure, financing cost and cost-reducing efficiency on supply chain green R&D and profitability.

The major contributions are the exploration of supply chain green R&D by taking into consideration channel power structures and cost-reducing efficiency and the validation of theoretical results using practice data.

The purpose of this study is to study the quantitative evaluation method of contact wire cracks by analyzing the changing law of eddy current signal characteristics under different cracks of contact wire of high-speed railway so as to provide a new way of thinking and method for the detection of contact wire injuries of high-speed railway.

Based on the principle of eddy current detection and the specification parameters of high-speed railway contact wires in China, a finite element model for eddy current testing of contact wires was established to explore the variation patterns of crack signal characteristics in numerical simulation. A crack detection system based on eddy current detection was built, and eddy current detection voltage data was obtained for cracks of different depths and widths. By analyzing the variation law of eddy current signals, characteristic parameters were obtained and a quantitative evaluation model for crack width and depth was established based on the back propagation (BP) neural network.

Numerical simulation and experimental detection of eddy current signal change rule is basically consistent, based on the law of the selected characteristics of the parameters in the BP neural network crack quantitative evaluation model also has a certain degree of effectiveness and reliability. BP neural network training results show that the classification accuracy for different widths and depths of the classification is 100 and 85.71%, respectively, and can be effectively realized on the high-speed railway contact line cracks of the quantitative evaluation classification.

This study establishes a new type of high-speed railway contact wire crack detection and identification method, which provides a new technical means for high-speed railway contact wire injury detection. The study of eddy current characteristic law and quantitative evaluation model for different cracks in contact line has important academic value and practical significance, and it has certain guiding significance for the detection technology of contact line in high-speed railway.

An accurate detection of overhead ground wire under open surroundings with varying illumination is the premise of reliable line grasping with the off-line arm when the inspection robot cross obstacle automatically. This paper aims to propose an improved approach which is called adaptive homomorphic filter and supervised learning (AHSL) for overhead ground wire detection.

First, to decrease the influence of the varying illumination caused by the open work environment of the inspection robot, the adaptive homomorphic filter is introduced to compensation the changing illumination. Second, to represent ground wire more effectively and to extract more powerful and discriminative information for building a binary classifier, the global and local features fusion method followed by supervised learning method support vector machine is proposed.

Experiment results on two self-built testing data sets A and B which contain relative older ground wires and relative newer ground wire and on the field ground wires show that the use of the adaptive homomorphic filter and global and local feature fusion method can improve the detection accuracy of the ground wire effectively. The result of the proposed method lays a solid foundation for inspection robot grasping the ground wire by visual servo.

This method AHSL has achieved 80.8 per cent detection accuracy on data set A which contains relative older ground wires and 85.3 per cent detection accuracy on data set B which contains relative newer ground wires, and the field experiment shows that the robot can detect the ground wire accurately. The performance achieved by proposed method is the state of the art under open environment with varying illumination.

Online influencers are increasingly used by brands around the globe to establish brand communication. This study aims to investigate the characteristics of social media content in terms of presentation style and brand communication among online influencers in China. The authors identified how characteristics of social media posts influence young consumers’ engagement with the posts.

The authors analyzed 1,779 posts from the Sina Weibo accounts of ten top-ranked online influencers by combining traditional content analysis with Web data crawling of audience engagement with social media posts.

Online influencers in China more frequently used photos than videos to communicate with their social media audience. Altogether 8% and 6% of posts carried information about promotion and event, respectively. Posts with promotional incentives as well as event information were more likely to engage audiences. Altogether 22% of the sampled social media posts mentioned brands. Posts with brand information, however, were less likely to engage audiences. Furthermore, having long text is more effective than photos/images in generating likes from social media audiences.

Combining content analysis of social media posts and engagement analytics obtained via Web data crawling, this study is, to the best of the authors’ knowledge, one of the first empirical studies to analyze influencer marketing and young consumers’ reactions to social media in China.

The implementation of reverse logistics (RL) as a strategic decision has gained significant attention amongst organisations due to its benefits to sustainable development. The purpose of this paper is to provide a comprehensive review of the literature to evaluate the performance of the RL process based on the three dimensions of sustainability including environmental, economic and social aspects.

Content analysis was adopted to collect and analyse the information.

The findings of this research show that most of the studies have focused on the performance evaluation of RL by considering the factors associated with economic and environmental performance. The social aspect of RL has been overlooked and requires investigation due to its contribution to positive social outcomes. In addition, no research has been conducted to assess the impact of each of the disposition options on the triple-bottom-line sustainability performance in one study.

Although RL can make a significant contribution to improving the sustainability performance of firms, little research has been undertaken on exploring the relationship between RL and sustainability performance. This paper provides practitioners, academics and researchers a broad and complete view of the relationship between RL and sustainability performance with suggestion for future research.

High-speed turnouts are more complex in structure and thus may cause abnormal vibration of high-speed train car body, affecting driving safety and passenger riding experience. Therefore, it is necessary to analyze the data characteristics of continuous hunting of high-speed trains passing through turnouts and propose a diagnostic method for engineering applications.

First, Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) is performed to determine the first characteristic component of the car body’s lateral acceleration. Then, the Short-Time Fourier Transform (STFT) is performed to calculate the marginal spectra. Finally, the presence of a continuous hunting problem is determined based on the results of the comparison calculations and diagnostic thresholds. To improve computational efficiency, permutation entropy (PE) is used as a fast indicator to identify turnouts with potential problems.

Under continuous hunting conditions, the PE is less than 0.90; the ratio of the maximum peak value of the signal component to the original signal peak value exceeded 0.7, and there is an energy band in the STFT time-frequency map, which corresponds to a frequency distribution range of 1–2 Hz.

The research results have revealed the lateral vibration characteristics of the high-speed train’s car body during continuous hunting when passing through turnouts. On this basis, an effective diagnostic method has been proposed. With a focus on practical engineering applications, a rapid screening index for identifying potential issues has been proposed, significantly enhancing the efficiency of diagnostic processes.

1. To improve the causality analysis performance, a novel causality detector based on time-delayed convergent cross mapping (TD-CCM) is proposed in this work. 2. Identify the root cause of plant-wide oscillations in process control system.

A novel causality analysis framework is proposed based on denoising and periodicity-removing TD-CCM (time-delayed convergent cross mapping). We first point out that noise and periodicity have adverse effects on causality detection. Then, the empirical mode decomposition (EMD) and detrended fluctuation analysis (FDA) are combined to achieve denoising. The periodicities are effectively removed through singular spectrum analysis (SSA). Following, the TD-CCM can accurately capture the causalities and locate the root cause by analyzing the filtered signals.

1. A novel causality detector based on denoising and periodicity-removing time-delayed convergent cross mapping (TD-CCM) is proposed. 2. Simulation studies show that the proposed method is able to improve the causality analysis performance. 3. Industrial case study shows the proposed method can be used to analyze the root cause of plant-wide oscillations in process control system.

1. A novel causality detector based on denoising and periodicity-removing time-delayed convergent cross mapping (TD-CCM) is proposed. 2. The influences of noise and periodicity on causality analysis are investigated. 3. Simulations and industrial case shows that the proposed method can improve the causality analysis performance and can be used to identify the root cause of plant-wide oscillations in process control system.

Cross-docking is a supply chain distribution and logistics strategy for which less-than-truckload shipments are consolidated into full-truckload shipments. Goods are stored up to a maximum of 24 hours in a cross-docking terminal. In this chapter, we build on the literature review by Ladier and Alpan (2016), who reviewed cross-docking research and conducted interviews with cross-docking managers to find research gaps and provide recommendations for future research. We conduct a systematic literature review, following the framework by Ladier and Alpan (2016), on cross-docking literature from 2015 up to 2020. We focus on papers that consider the intersection of research and industry, e.g., case studies or studies presenting real-world data. We investigate whether the research has changed according to the recommendations of Ladier and Alpan (2016). Additionally, we examine the adoption of Industry 4.0 practices in cross-docking research, e.g., related to features of the physical internet, the Internet of Things and cyber-physical systems in cross-docking methodologies or case studies. We conclude that only small adaptations have been done based on the recommendations of Ladier and Alpan (2016), but we see growing attention for Industry 4.0 concepts in cross-docking, especially for physical internet hubs.

This study aims to investigate whether Bangladesh would avoid the middle-income trap (MIT) in its transition to a high-income country (HIC) according to its “Vision 2041”.

Using both actual and forecasted secondary data, three MIT models of different approaches were used to evaluate the government’s vision-based projections. Moreover, crucial indicators of deindustrialization and institutional strength were linked to the investigation of potential transitions.

According to the absolute definition and international forecasts, the Bangladesh economy might not fall into an MIT at its lower-middle-income level within the intended period due to being shorter than the defined limit. However, its real GDP per capita relative to the USA would remain far below the defined threshold limit of an upper-middle-income country (UMC) in 2041. Meanwhile, Bangladesh has reached the third of the five gradual phases and is awaiting a new transition in 2029. However, its vision-based plan would face challenges such as skills gaps, institutional reforms and successive global crises.

Bangladesh might be trapped in MIT at the UMC level in the 2030s, with no path to renovate after the demographic dividend ends in 2047. In this regard, the government must demonstrate a strong political will to ensure the effectiveness of its policies and the viability of its institutions.

This study not only compared projections to forecasts using different MIT models but also connected transition phases to industrial policies and institutional strengths.

There is no consensus on the most effective way to foster entrepreneurship in educational institutions, and educational policies on entrepreneurial activity differ significantly amidst organizations and contexts. Thus, the objective of this research is to analyze influence of the college environment and entrepreneurial characteristics on the entrepreneurial intention of Brazilian high school/technical students.

The empirical research used partial least squares structural equation modeling (PLS-SEM) and a sample of 384 students of technical courses, such as Administration, Systems Development, Chemistry, Secretariat, among others.

The proposed model was validated, and the hypotheses were confirmed, proving suitable for high school/technical education. Assessing the high school environment with this model can help determine each organization's strengths and weaknesses and, indeed, the impacts on the ecosystems in which it operates. The results of the multi-group analysis indicate differences concerning the courses as well.

The main limitations involve non-probabilistic sampling procedures and the collection having been carried out with a single cross-section.

For managers and teachers, this article presents indicators to qualify the activities of the educational environment, considering teaching activities, extracurricular activities, fairs, actions of teachers and students, among other initiatives.

The article contributes to high school managers, particularly in technical schools, so that they understand the factors that influence the profile and entrepreneurial intention of students; in other words, something that can impact the lives of thousands of students, teachers and the community itself.

This research presents a novel analysis of the antecedents that drive student entrepreneurship in an underexplored educational context in a developing country. The results show the necessary conditions for technical schools to foster entrepreneurial activity, feeding innovation ecosystems with entrepreneurial talent.