Jianyong Liu, Xueke Luo, Long Li, Fangyuan Liu, Chuanyang Qiu, Xinghao Fan, Haoran Dong, Ruobing Li and Jiahao Liu
Utilizing electrical discharge machining (EDM) to process micro-holes in superalloys may lead to the formation of remelting layers and micro-cracks on the machined surface. This…
Abstract
Purpose
Utilizing electrical discharge machining (EDM) to process micro-holes in superalloys may lead to the formation of remelting layers and micro-cracks on the machined surface. This work proposes a method of composite processing of EDM and ultrasonic vibration drilling for machining precision micro-holes in complex positions of superalloys.
Design/methodology/approach
A six-axis computer numerical control (CNC) machine tool was developed, whose software control system adopted a real-time control architecture that integrates electrical discharge and ultrasonic vibration drilling. Among them, the CNC system software was developed based on Windows + RTX architecture, which could process the real-time processing state received by the hardware terminal and adjust the processing state. Based on the SoC (System on Chip) technology, an architecture for a pulse generator was developed. The circuit of the pulse generator was designed and implemented. Additionally, a composite mechanical system was engineered for both drilling and EDM. Two sets of control boards were designed for the hardware terminal. One set was the EDM discharge control board, which detected the discharge state and provided the pulse waveform for turning on the transistor. The other was a relay control card based on STM32, which could meet the switch between EDM and ultrasonic vibration, and used the Modbus protocol to communicate with the machining control software.
Findings
The mechanical structure of the designed composite machine tool can effectively avoid interference between the EDM spindle and the drilling spindle. The removal rate of the remelting layer on 1.5 mm single crystal superalloys after composite processing can reach over 90%. The average processing time per millimeter was 55 s, and the measured inner surface roughness of the hole was less than 1.6 µm, which realized the micro-hole machining without remelting layer, heat affected zone and micro-cracks in the single crystal superalloy.
Originality/value
The test results proved that the key techniques developed in this paper were suite for micro-hole machining of special materials.
Details
Keywords
Ming Yang, Fangyuan Xing, Xiaomeng Liu, Zimeng Chen and Yali Wen
Adopting adaptive behavior has become a basic measure for farmers because the increasingly severe climate change is affecting agricultural production. Perception is a critical…
Abstract
Purpose
Adopting adaptive behavior has become a basic measure for farmers because the increasingly severe climate change is affecting agricultural production. Perception is a critical first step in adopting adaptive behaviors. Livelihood resilience represents a farmer's ability to adapt to climate change. Therefore, this article aims to explore the impact of livelihood resilience and climate change perception on the climate change adaptation behavior of farmers in the Qinling Mountains region of China.
Design/methodology/approach
In this study, 443 micro-survey data of farmers are obtained through one-on-one interviews with farmers. The Logit model and Poisson regression model are used to empirically examine the impact of farmers' livelihood resilience and climate change perception on their climate change adaptation behaviors.
Findings
It was found that 86.68% of farmers adopt adaptive behaviors to reduce the risks of facing climate change. Farmers' perception of extreme weather has a significant positive impact on their adaptive behavior under climate change. The resilience of farmers' livelihoods and their perception of rainfall have a significant positive impact on the intensity of their adaptive behavior under climate change. Climate change adaptation behaviors are also different for farmers with different levels of livelihood resilience.
Originality/value
Based on the results, policy recommendations are proposed to improve farmers' perception of climate change, enhance the sustainability of farmers' adaptive behavior to climate change, strengthen emergency management and infrastructure construction and adjust and upgrade farmers' livelihood models.