Search results

This paper aims to obtain the evolution law of dynamic performance of CR400BF electric multiple unit (EMU).

Using the dynamic simulation based on field test, stiffness of rotary arm nodes and damping coefficient of anti-hunting dampers were tested. Stiffness, damping coefficient, friction coefficient, track gauge were taken as random variables, the stochastic dynamics simulation method was constructed and applied to research the evolution law with running mileage of dynamic index of CR400BF EMU.

The results showed that stiffness and damping coefficient subjected to normal distribution, the mean and variance were computed and the evolution law of stiffness and damping coefficient with running mileage was obtained.

Firstly, based on the field test we found that stiffness of rotary arm nodes and damping coefficient of anti-hunting dampers subjected to normal distribution, and the evolution law of stiffness and damping coefficient with running mileage was proposed. Secondly stiffness, damping coefficient, friction coefficient, track gauge were taken as random variables, the stochastic dynamics simulation method was constructed and applied to the research to the evolution law with running mileage of dynamic index of CR400BF EMU.

In order to systematically grasp the changes and matching characteristics of wheel and rail profiles of high speed railway (HSR) in China, 172 rail profile measurement points and 384 wheels of 6 high-speed electric motive unites (EMUs) were selected on 6 typical HSR lines, including Beijing–Shanghai, Wuhan–Guangzhou, Harbin–Dalian, Lanzhou–Xinjiang, Guiyang–Guangzhou and Dandong–Dalian for a two-year field test.

Based on the measured data, the characteristics of rail and wheel wear were analyzed by mathematical statistics method. The equivalent conicity of wheel and rail matching in a wheel reprofiling cycle was analyzed by using the measured rail profile.

Results showed that when the curve radius of HSR was larger than 2,495 m, the wear rate of straight line and curve rail was almost the same. For the line with annual traffic gross weight less than 11 Mt, the vertical wear of rail was less than 0.01 mm. The wear rate of the rail with the curve radius less than 800 m increased obviously. The wheel tread wear of EMUs on Harbin–Dalian line, Lanzhou–Xinjiang line and Dandong–Dalian line was relatively large, and the average wear rate of tread was about 0.05–0.06 mm·(10,000 km)⁻¹, while that of Beijing–Shanghai line, Wuhan–Guangzhou line and Guiyang–Guangzhou line was about 0.03–0.035 mm·(10,000 km)⁻¹. When the wear range was small, the equivalent conicity increased with the increase of wheel tread wear. When the wear range of wheel was wide, the wheel–rail contact points were evenly distributed, and the equivalent conicity did not increase obviously.

This research proposes the distribution range of the equivalent conicity in one reprofiling cycle of various EMU trains, which provides guidance for the condition-based wheel reprofiling.

Under the high-speed operating conditions, the effects of wheelset elastic deformation on the wheel rail dynamic forces will become more notable compared to the low-speed condition. In order to meet different analysis requirements and selecting appropriate models to analyzing the wheel rail interaction, it is crucial to understand the influence of wheelset flexibility on the wheel-rail dynamics under different speeds and track excitations condition.

The wheel rail contact points solving method and vehicle dynamics equations considering wheelset flexibility in the trajectory body coordinate system were investigated in this paper. As for the wheel-rail contact forces, which is a particular force element in vehicle multibody system, a method for calculating the Jacobian matrix of the wheel-rail contact force is proposed to better couple the wheel-rail contact force calculation with the vehicle dynamics response calculation. Based on the flexible wheelset modeling approach in this paper, two vehicle dynamic models considering the wheelset as both elastic and rigid bodies are established, two kinds of track excitations, namely normal measured track irregularities and short-wave irregularities are used, wheel-rail geometric contact characteristic and wheel-rail contact forces in both time and frequency domains are compared with the two models in order to study the influence of flexible wheelset rotation effect on wheel rail contact force.

Under normal track irregularity excitations, the amplitudes of vertical, longitudinal and lateral forces computed by the flexible wheelset model are smaller than those of the rigid wheelset model, and the virtual penetration and equivalent contact patch are also slightly smaller. For the flexible wheelset model, the wheel rail longitudinal and lateral creepages will also decrease. The higher the vehicle speed, the larger the differences in wheel-rail forces computed by the flexible and rigid wheelset model. Under track short-wave irregularity excitations, the vertical force amplitude computed by the flexible wheelset is also smaller than that of the rigid wheelset. However, unlike the excitation case of measured track irregularity, under short-wave excitations, for the speed within the range of 200 to 350 km/h, the difference in the amplitude of the vertical force between the flexible and rigid wheelset models gradually decreases as the speed increase. This is partly due to the contribution of wheelset’s elastic vibration under short-wave excitations. For low-frequency wheel-rail force analysis problems at speeds of 350 km/h and above, as well as high-frequency wheel-rail interaction analysis problems under various speed conditions, the flexible wheelset model will give results agrees better with the reality.

This study provides reference for the modeling method of the flexible wheelset and the coupling method of wheel-rail contact force to the vehicle multibody dynamics system. Furthermore, by comparative research, the influence of wheelset flexibility and rotation on wheel-rail dynamic behavior are obtained, which is useful to the application scope of rigid and flexible wheelset models.

The relationship between farm size and greenhouse gas (GHG) emissions has not been clearly defined. This paper aims to assess and compare the impact of farm size on greenhouse gas (GHG) emissions derived from wheat and maize production in the North China Plain (NCP), one of the most important agricultural regions in China.

A field survey through face-to-face interviews was conducted to collect the primary data, and life cycle assessment method, a worldwide comparable framework, was then adopted to characterize the farm-size effect on greenhouse gas (GHG) wheat and maize production in NCP.

It was confirmed that GHG emissions from N fertilizer production and use were the primary contributor to total carbon footprint (CF). As farm size increased, maize yield increased but wheat yield barely changed, while area-scaled and yield-scaled CF declined for both crops. These results were supposed to relate to utilize the inputs more efficiently resulting from increased application of modern agriculture methods on larger operations. It was also found maize not only had higher grain yields, but possessed much smaller CFs. More notably, the reduction of CF with farm size seemed to be more sensitive for maize as compared to wheat. To further mitigate GHG emissions, farm size should better be larger for wheat than for maize.

This study provides useful information guide for Chinese agriculture in increasing crop production, raising farm income and relieving environmental burdens caused by the misuse of agricultural resources.

This paper theoretically and empirically analyzes the effects of the elderly’s physical health status on their need for care and the choice of care models in China.

Empirically, the estimation results of a large-sample randomized intervention trial with chronic obstructive pulmonary disease (COPD) patients through the difference-in-difference method indicated the following: (1) After the COPD intervention trial, the physical health status of the elderly in the treatment group improved significantly, the need for care was substantially reduced and the health improvement led to a 35.5% reduction in the probability of using elderly care. (2) The reduction in the need for care regarding the treatment group occurred mainly in social care. The probability of using social care decreased by 67.8% due to the elderly’s health improvement, while that of home care remained unchanged generally. (3) Further heterogeneity tests suggested that families with fewer potential internal resources for caregiving had a more pronounced decline in the need for social care.

Theoretically, these empirical results support the existence of the “pecking order” theory in the family’s choice of elderly care model, that is, families tend to employ all internal resources for caregiving before resorting to social care, resulting in a higher sensitivity of social care to health.

The main policy implication of this paper is that ex ante preventive health intervention policies can significantly alleviate the burden of care, especially social care, on families. And preventive health intervention policies are particularly effective in reducing the burden of the families with relatively few resources for informal internal care.