Search results

Innovation is the fundamental driving force for the long-term sustainable development of an economy. After four decades of rapid economic growth, China is facing crises related to a demographic structure of “aging before getting rich,” industrial overcapacity of low-end products and environmental and resources constraints. This paper aims to discuss these issues.

Based on logical analysis and recapitulation of previous empirical research, this study presents the conclusion.

Scientific and technological innovation, as strategic support to improve social productivity and overall national strength, must be placed at the center of the country’s overall development.

The development model that preys upon cheap resources for extensive growth is unsustainable. Thus, the country needs an urgent strategic switch to drive its economic growth through research and development innovation and original technological advancement.

Minimizing the energy consumption in a wireless sensor node is important for lengthening the lifetime of a battery. Radio transmission is the most energy-consuming task in a wireless sensor node, and by compressing the sensor data in the online mode, it is possible to reduce the number of transmission periods. This study aims to demonstrate that temporal compression methods present an effective method for lengthening the lifetime of a battery-powered wireless sensor node.

In this study, the energy consumption of LoRa-based sensor node was evaluated and measured. The experiments were conducted with different LoRaWAN data rate parameters, with and without compression algorithms implemented to compress sensor data in the online mode. The effect of temporal compression algorithms on the overall energy consumption was measured.

Energy consumption was measured with different LoRaWAN spreading factors. The LoRaWAN transmission energy consumption significantly depends on the spreading factor used. The other significant factors affecting the LoRa-based sensor node energy consumption are the measurement interval and sleep mode current consumption. The results show that temporal compression algorithms are an effective method for reducing the energy consumption of a LoRa sensor node by reducing the number of LoRa transmission periods.

This paper presents with a practical case that it is possible to reduce the overall energy consumption of a wireless sensor node by compressing sensor data in online mode with simple temporal compression algorithms.

Cambodia's sustained and robust growth performance since the post-reform era in 1993 has been attributed to the boom in inward foreign direct investment (FDI) attracted to the country's labor-intensive industries, where it has comparative advantages. The purpose of this study is twofold. First, it aims to assess the consistency between Cambodia's revealed comparative advantage in exports and its sectoral inward FDI. Second, it examines the relationship between industry-level FDI and growth performance by accounting for heterogeneity across industries.

The paper uses descriptive methods and an industry-level dataset provided by the Council for the Development of Cambodia to elucidate the issue. Additionally, it applies instrumental variable two-stage least squares (IV-2SLS) regression to investigate the impact of industry-specific FDI on economic growth from 1994 to 2017, which also aims to address the endogeneity issue.

On the one hand, our research finds that Cambodia's FDI has been attracted to sectors in which it has a comparative advantage during the aforementioned period. On the other hand, both FDI and the comparative advantage index significantly impact economic growth in Cambodia. The greater the flow of foreign investment into sectors with comparative advantage, the stronger the impetus for growth.

This study fills a gap in the literature and contributes to a better understanding of the relationship between FDI and economic growth in Cambodia. It is the first paper to investigate the heterogeneity of industry-specific FDI and provides practical recommendations for policymakers to effectively harness foreign investments and avoid malign FDI inflows.

Science policy and practice for open access (OA) books is a rapidly evolving area in the scholarly domain. However, there is much that remains unknown, including how many OA books there are and to what degree they are included in preservation coverage. The purpose of this study is to contribute towards filling this knowledge gap in order to advance both research and practice in the domain of OA books.

This study utilized open bibliometric data sources to aggregate a harmonized dataset of metadata records for OA books (data sources: the Directory of Open Access Books, OpenAIRE, OpenAlex, Scielo Books, The Lens, and WorldCat). This dataset was then cross-matched based on unique identifiers and book titles to openly available content listings of trusted preservation services (data sources: Cariniana Network, CLOCKSS, Global LOCKSS Network, and Portico). The web domains of the OA books were determined by querying the web addresses or digital object identifiers provided in the metadata of the bibliometric database entries.

In total, 396,995 unique records were identified from the OA book bibliometric sources, of which 19% were found to be included in at least one of the preservation services. The results suggest reason for concern for the long tail of OA books distributed at thousands of different web domains as these include volatile cloud storage or sometimes no longer contained the files at all.

Data quality issues, varying definitions of OA across services and inconsistent implementation of unique identifiers were discovered as key challenges. The study includes recommendations for publishers, libraries, data providers and preservation services for improving monitoring and practices for OA book preservation.

This study provides methodological and empirical findings for advancing the practices of OA book publishing, preservation and research.

Cloud Manufacturing (CM) is the manufacturing version of Cloud Computing and aims to increase flexibility in the provision of manufacturing services. On-demand manufacturing services can be requested by users to the cloud and this enables the concept of Manufacturing-as-a-Service (MaaS). Given the considerable number of prototypes and proofs of concept addressed in literature, this work seeks real CM platforms to study them from a business perspective, in order to discover what MaaS concretely means today and how these platforms are operating.

Since the number of real applications of this paradigm is very limited (if the authors exclude prototypes), the research approach is qualitative. The paper presents a multiple-case analysis of 6 different platforms operating in the manufacturing field today. It is based on empirical data and inductively researches differences among them (e.g. stakeholders, operational flows, capabilities offered and scalability level).

MaaS has come true in some contexts, and today it is following two different deployment models: open or closed to the provider side. The open architecture is inspired by a truly open platform which allows any company to be part of the pool of service providers, while the closed architecture is limited to a single service provider of the manufacturing services, as it happens in most cloud computing services.

The research shoots a picture of what MaaS offers today in term of capabilities, what are the deployment models and finally suggests a framework to assess different levels of development of MaaS platforms.

Vision, audition, olfactory, tactile and taste are five important senses that human uses to interact with the real world. As facing more and more complex environments, a sensing system is essential for intelligent robots with various types of sensors. To mimic human-like abilities, sensors similar to human perception capabilities are indispensable. However, most research only concentrated on analyzing literature on single-modal sensors and their robotics application.

This study presents a systematic review of five bioinspired senses, especially considering a brief introduction of multimodal sensing applications and predicting current trends and future directions of this field, which may have continuous enlightenments.

This review shows that bioinspired sensors can enable robots to better understand the environment, and multiple sensor combinations can support the robot’s ability to behave intelligently.

The review starts with a brief survey of the biological sensing mechanisms of the five senses, which are followed by their bioinspired electronic counterparts. Their applications in the robots are then reviewed as another emphasis, covering the main application scopes of localization and navigation, objection identification, dexterous manipulation, compliant interaction and so on. Finally, the trends, difficulties and challenges of this research were discussed to help guide future research on intelligent robot sensors.

In this study, the authors examine whether social capital embedded in individuals' social networks is connected to employees' long-term income development in Finland.

Analyses are based on 25–35-year-old employees from the Finnish Living Conditions Survey of 1994 combined with register data on earned incomes from 1995 to 2016. The authors used questions addressing the frequency of meeting parents or siblings, spending free time with co-workers and participation in associational, civic or other societal activities as measures of the extent of network capital. Ordered logistic model was used to examine whether the size and composition of social networks differ by gender and socio-economic status. Linear growth curve models were employed to estimate the effect of social capital on long-term income development.

Results indicate minor differences in network composition according to gender, but large differences between socio-economic groups. The authors found that income development was faster for those who participated in civic activities occasionally or who met their relatives or co-workers on a monthly basis, that is, for the “middle group”.

Results are generalizable only to Finnish or Nordic welfare state context. The authors’ measures of social capital come from cross-sectional survey. Thus, the authors are not able to address the stability or accumulation of social capital during life course. This restriction will probably cause the authors’ analysis to underestimate the true effect of social capital on earned incomes.

Moderate-level investments to network capital seem to be the most beneficial with regard to the long-term income development.

The study results give support to the idea that social capital can be transformed into economic capital. The results also imply that in economic terms it is important to balance diverse forms of social capital. At the policy level, a special emphasis should be directed to employees with low-socio-economic position. These people are especially vulnerable as their low level of income is combined with network composition that hinders their further income development.

The combined survey and register data give unique insight on how the social capital embedded in individuals' social networks is connected with long-term income development.

The introduction of quality management Internet of things (QM IoT) can help food supply chain members to enhance real-time visibility, quality, safety and efficiency of products and processes. Current literature indicates three main research gaps, including a lack of studies in QM IoT in the food supply chain, the vagueness of integrative adoption of new technology framework and deficient research covering both adoption attitude and intention in the same model. This study aims to propose an analysis model based on the technological–organizational–environmental (TOE) framework and reinforced by the collaborative structure to capture the importance of the supply chain network.

The partial least square-structural equation modeling (PLS-SEM) was applied to test the impacts of the adoption factors on QM IoT adoption attitude and intention among 197 respondents in food manufacturing in Thailand.

The results indicated that compatibility, trialability, adaptive capacity, innovative capability, executive support, value chain partner pressure, presence of service provider and information sharing significantly impacted the attitude toward QM IoT adoption, while adaptive capability, innovative capability and information sharing directly influenced the QM IoT adoption intention. Furthermore, the attitude toward QM IoT adoption positively impacted the QM IoT adoption intention.

This study contributed to academicians by proposing a more solid adoption framework for QM IoT area. In addition, the business practitioners could actively prepare themselves for the QM IoT adoption, whereas the service providers could provide better and suitable service.

This research contributes to the building of a more solid framework and indicates significant factors that impact the attitude toward QM IoT adoption and adoption intention.

In South Africa, public institutions face challenges in transitioning their digital records to trusted digital repositories due to a deficiency in skills, infrastructure and systems. Free and open-source software (FOSS) presents a viable solution for facilitating the transfer of digital archives for permanent preservation. Despite the existence of FOSS policy in South Africa, the public sector has yet to fully use it to engage in the development and implementation of products for records management and archive preservation using open-source software. This study aims to explore the ingestion of digital archives into an approved long-term storage system through FOSS in South Africa with the view of developing a framework.

The study adopted a qualitative research approach to collect data through interviews with purposively selected participants (records managers, archivists and IT officials) from national government departments that have implemented records management systems for digital curation of archives, as well as the National Archives and Records Services of South Africa (NARSSA), which regulates archives and records management, and the State Information Technology Agency, which regulates information technology in government.

The findings of the study suggest that the systematic transfer of digital materials from public entities to NARSSA, as required by statute, has not taken place.

The study specifically targeted national government departments that have implemented digital archives and records management systems. Consequently, perspectives from departments that have not implemented these solutions were excluded.

A framework is proposed for the transfer of digital archives, using interoperable FOSS, from government agencies responsible for records management to NARSSA for archival preservation. This framework, it is hoped, will facilitate infrastructure and skills development in the management of records and preservation of archives through open platforms.

The purpose of this paper is to examine how advertising is used by real estate companies as an instrument for managing the adverse effects of a catastrophe.

Through a theoretical analysis, types of post-disaster advertising messages were identified. On the basis of the likely variations in post-disaster advertising, a content analysis was conducted of a sample of 4,150 property print advertisements to identify advertising messages related to the earthquake. Finally, the message changes in these earthquake-related advertisements were evaluated and compared with the dimension of time to explore the development of advertising strategies.

The authors found that 12 types of advertising messages were used by developers in response to the Wenchuan earthquake. The initial advertising strategy was mainly to manage public relations, then the strategy was to reduce or compensate for the increased earthquake risk perceptions of buyers.

The findings provide valuable references for helping enterprises adopt effective advertising messages and strategies to reduce the negative effects of disasters.

There are only a few studies on advertising campaigns, especially in the real estate industry, that have been conducted in the wake of catastrophes. This study sought to expand upon the scarce findings in this particular field.