Search results

What is the relation between the land system with Chinese characteristics and the country's high-speed economic growth in the past decades? There is a lack of rigorous academic research based on the general equilibrium theory of macroeconomics on this issue.

By building a multisector dynamic general equilibrium framework with land system, this paper explores how the land supply mode with Chinese characteristics affects China's economic growth as well as its transmission mechanism.

This paper confirms the importance of land system with Chinese characteristics in explaining the mystery of China's high-speed economic growth. Counterfactual analysis shows that if China adopts a land system similar to that of other developing countries, GDP will drop 36% from the current level under the baseline model.

As the industrial sector shrinks relatively and the output elasticity of infrastructure decreases, this inhibitory effect will become more apparent. China should improve its land supply mode, especially expand the supply of commercial and residential land and reduce the cost of land in the service sector. This can promote better economic development in the future and thus improve household welfare and the structure of aggregate demand, replace “land-based public finance” and thus inhibit the “high leverage” risks of local governments.

There is no proposed solution to address the unresolved issues of constructing the Chinese university intellectual property information service system (IPISS) to promote the whole process service efficiency of IP creation, utilization, protection and management. The purpose of this paper is to propose a complete system, including theoretical framework and system development which addresses the existing difficulties to IP create, protect and transfer for researchers in universities. The paper shares the practice of utilizing the system developed by Wuhan University IP research team known as Wuhan University Intellectual Property Information Service System (WHU-IPISS).

First, the IPISS of 23 universities in China was investigated on the internet. Aiming at the deficiencies of the system, such as single service type, lack of patent display window, low management efficiency. This paper constructs the theoretical framework, proposes the IP ecological chain model, divides it into four sub-chains and carries on the functional design. Further, under the theoretical framework, the IPISS was developed, including the resource supply management system, user demand matching system, resource assessment system and expert support system. Finally, the system was applied to Wuhan University to provide IP services in the whole process for university researchers.

WHU-IPISS realizes the functions of IP resource supply, demand matching, value evaluation and expert support. It solves the IP needs of university researchers and provides a guarantee for their technology research, patent portfolio, patent transfer and patent rights protection. It also improves the efficiency of IP service and can construct the IP ecosphere in universities.

The WHU-IPISS solution resolves issues of “How to develop the university IP whole process service model, fulfilling the IP service needs for universities' researchers”. The software will be released as open-source for other universities' use. The publishing model is also useful for those universities that intend to implement the IPISS.

The transition to green growth goals requires the concerted efforts of the whole society. Enterprises, as important players in the market, play a key role in promoting green and sustainable development. The rise of the concept of sustainable development has enabled more enterprises to disclose environmental, social and governance (ESG) information, and ESG behaviour is regarded as a positive strategic behaviour to implement the new development concept. This paper aims to explore the influence of ESG performance on enterprise green innovation.

This study applies a fixed effect model and the regulation effect of empirical analysis to explore the influence of ESG performance on enterprise green innovation. The object of investigation is 2014–2021 Shanghai and Shenzhen A-share listed companies.

The results of an empirical analysis outline the following conclusions: (1) ESG performance has a significant effect on enterprise green innovation, mainly by easing the pressure of the financing enterprise, fitting stakeholders’ environmental protection concept and obtaining employee organizational identity that influences enterprise green innovation. (2) Government regulation positively regulates the role of ESG performance in promoting the green innovation of enterprises. (3) Heterogeneity analysis found that the strengthening role of ESG performance on the green innovation of enterprises is stronger in green invention patents, state-owned enterprises and nonheavily polluting industries.

Despite the valuable findings, this study has a few limitations. Thus, it is necessary to extend the object of investigation by adding other Asian countries, which allows for comparison analysis and allocating best practices for promoting green innovation. Besides, innovation and ESG performance depend on the quality of institutions. In this case, the future study should incorporate the indicators that reveal the quality of institutions (corruption, transparency, digitalisation, voice, accountability, etc.).

According to the above conclusions, this paper proposes suggestions at the level of enterprises, government and investors. At the enterprise level, ESG responsibility should be strengthened, ESG information should be consciously disclosed and the quality of ESG disclosure should be improved. Government departments should play the role of supervisors, improve the construction of ESG information disclosure systems and promote the formation of ESG systems. At the social level, investors should improve the ESG information status and pay more attention to the ESG performance of enterprises.

This study fills the scientific gaps in the analysis impact of ESG performance on the green innovation of enterprises. This paper contributes to the theoretical landscape of ESG efficiency by developing approaches based on two empirical models: testing the impact of enterprise ESG performance on green innovation and testing whether government regulation plays a regulatory role in the relationship between ESG performance and green innovation. Besides, this study analysed the ESG performance and green innovation within the following categories: heavy and nonheavy polluter industries; state and nonstate-owned enterprise groups.

Detection of hidden defects of aluminum alloy plate with damping coating is a challenging problem. At present, only a few non-destructive testing methods exist to address this engineering problem. Without the restriction of skin effect, remote field eddy current (RFEC) overcomes the interference caused by the damping coating. The RFEC, which has potential advantages for detecting the hidden defects of aluminum plate with damping coating, can penetrate the metal plate to detect buried depth defects. This study aims to test how thick the RFEC sensor can penetrate the metal plate to detect the buried defects.

The magnetic field distribution characteristics are analyzed, the magnetic field intensity distribution is calculated, and the structure and parameters of the coil, magnetic circuit and shielding damping are determined through the two- and three-dimensional finite element simulation methods. Optimal excitation frequency is obtained, and the distance between the excitation coil and detection coil is determined by analyzing the relationship between excitation frequency and remote field points.

Simulation and experimental results verify the feasibility of applying the RFEC detection technology in detecting the hidden defects of aluminum alloy plate with damping coating.

In this paper, the RFEC testing model of hidden defects in aluminum plate sample with damping coating is established by using the finite element method.

Steer-by-wire (SBW) system mainly relies on sensors, controllers and motors to replace the traditionally mechanical transmission mechanism to realize steering functions. However, the sensors in the SBW system are particularly vulnerable to external influences, which can cause systemic faults, leading to poor steering performance and even system instability. Therefore, this paper aims to adopt a fault-tolerant control method to solve the safety problem of the SBW system caused by sensors failure.

This paper proposes an active fault-tolerant control framework to deal with sensors failure in the SBW system by hierarchically introducing fault observer, fault estimator, fault reconstructor. Firstly, the fault observer is used to obtain the observation output of the SBW system and then obtain the residual between the observation output and the SBW system output. And then judge whether the SBW system fails according to the residual. Secondly, dependent on the residual obtained by the fault observer, a fault estimator is designed using bounded real lemma and regional pole configuration to estimate the amplitude and time-varying characteristics of the faulty sensor. Eventually, a fault reconstructor is designed based on the estimation value of sensors fault obtained by the fault estimator and SBW system output to tolerate the faulty sensor.

The numerical analysis shows that the fault observer can be rapidly activated to detect the fault while the sensors fault occurs. Moreover, the estimation accuracy of the fault estimator can reach to 98%, and the fault reconstructor can make the faulty SBW system to retain the steering characteristics, comparing to those of the fault-free SBW system. In addition, it was verified for the feasibility and effectiveness of the proposed control framework.

As the SBW fault diagnosis and fault-tolerant control in this paper only carry out numerical simulation research on sensors faults in matrix and laboratory/Simulink, the subsequent hardware in the loop test is needed for further verification.

Aiming at the SBW system with parameter perturbation and sensors failure, this paper proposes an active fault-tolerant control framework, which integrates fault observer, fault estimator and fault reconstructor so that the steering performance of SBW system with sensors faults is basically consistent with that of the fault-free SBW system.

This paper aims to conceptualize supply market orientation (SMO) for the purchasing and supply chain management function and discusses how SMO capabilities are developed and how their application differs within and across firms. This research can thus be used as a blueprint for the development of a SMO capability that accommodates a firm’s unique contextual antecedents’ profile.

The qualitative research design comprises five in-depth case studies with 43 semi-structured interviews with large manufacturing and service firms.

SMO is defined as the capability to exploit market intelligence to assess, integrate and reconfigure the heterogeneously dispersed resources in purchasing and supply chain management in a way that best reflects the peculiarities of a firm’s supply environment. The empirical analysis shows that although SMO capabilities are configured similarly, their application varies across and within firms depending on the characteristics of a firm’s purchasing categories and tasks. Hence, reactive versus proactive SMO application is contingent upon firm-level and purchasing category–level characteristics.

The study uses the dynamic capabilities view as a theoretical background and provides empirical evidence and theoretical reasoning to elaborate and endorse SMO as a dynamic capability that firms need to have to compete in a complex and dynamic environment. The study provides guidance for supply chain managers on how to successfully develop and deploy a SMO capability.

Improving productivity and efficiency has always been crucial for industrial companies to remain competitive. In recent years, the topic of environmental impact has become increasingly important. Published research indicates that environmental and economic goals can enforce or rival each other. However, few papers have been published that address the interaction and integration of these two goals.

In this paper, we identify both, synergies and trade-offs based on a systematic review incorporating 66 publications issued between 1992 and 2021. We analyze, quantify and cluster examples of conjunctions of ecological and economic measures and thereby develop a framework for the combined improvement of performance and environmental compatibility.

Our findings indicate an increased significance of a combined consideration of these two dimensions of sustainability. We found that cases where enforcing synergies between economic and ecological effects were identified are by far more frequent than reports on trade-offs. For the individual categories, cost savings are uniformly considered as the most important economic aspect while, energy savings appear to be marginally more relevant than waste reduction in terms of environmental aspects.

No previous literature review provides a comparable graphical treatment of synergies and trade-offs between cost savings and ecological effects. For the first time, identified measures were classified in a 3 × 3 table considering type and principle.

The purpose of this paper is to survey how research data are governed at repositories in Japan by deductively establishing a governance typology based on the concept of openness in the context of knowledge commons and empirically assessing the conformity of repositories to each type.

The fuzzy-set ideal type analysis (FSITA) was adopted. For data collection, a manual assessment was conducted with all Japanese research data repositories registered on re3data.org.

The typology constructed in this paper consists of three dimensions: openness to resources (here equal to research data), openness to a community and openness to infrastructure provision. This paper found that there is no case where all dimensions are open, and there are several cases where the resources are closed despite research data repositories being positioned as a basis for open science in Japanese science and technology policy.

This is likely the first construction of the typology and application of FSITA to the study of research data governance based on knowledge commons. The findings of this paper provide practitioners insight into how to govern research data at repositories. The typology serves as a first step for future research on knowledge commons, for example, as a criterion of case selection in conducting in-depth case studies.

The purpose of this study is to describe latent classes explaining the innovation logic in the Finnish construction companies. Innovativeness is a driver of competitive performance and vital to the long-term success of any organisation and company.

Using finite mixture structural equation modelling (FMSEM), the authors have classified innovation logic into latent classes. The method analyses and recognises classes for companies that have similar logic in innovation activities based on the collected data.

Through FMSEM analysis, the authors have identified three latent classes that explain the innovation logic in the Finnish construction companies – LC1: the internal innovators; LC2: the non-innovation-oriented introverts; and LC3: the innovation-oriented extroverts. These three latent classes clearly capture the perceptions within the industry as well as the different characteristics and variables.

The presented latent classes explain innovation logic but is limited to analysing Finnish companies. Also, the research is quantitative by nature and does not increase the understanding in the same manner as qualitative research might capture on more specific aspects.

This paper presents starting points for construction industry companies to intensify innovation activities. It may also indicate more fundamental changes for the structure of construction industry organisations, especially by enabling innovation friendly culture.

This study describes innovation logic in Finnish construction companies through three models (LC1–LC3) by using quantitative data analysed with the FMSEM method. The fundamental innovation challenges in the Finnish construction companies are clarified via the identified latent classes.