Search results

Intuitionistic linguistic fuzzy information (ILFI), characterized by linguistic terms and intuitionistic fuzzy sets (IFSs), can easily express the fuzzy information in the process of muticriteria decision making (MCDM) and muticriteria group decision making (MCGDM) problems. The purpose of this paper is to provide an overview of aggregation operators (AOs) and applications of ILFI.

First, some meaningful AOs for ILFI are summarized, and some extended MCDM approaches for intuitionistic uncertain linguistic variables (IULVs), such as extended TOPSIS, extended TODIM, extended VIKOR, are discussed. Then, the authors summarize and analyze the applications about the AOs of IULVs.

IULVs, characterized by linguistic terms and IFSs, can more detailed and comprehensively express the criteria values in the process of MCDM and MCGDM. Therefore, lots of researchers pay more and more attention to the MCDM or MCGDM methods with IULVs.

The authors summarize and analyze the applications about the AOs of IULVs Finally, the authors point out some possible directions for future research.

Steer-by-wire (SBW) system mainly relies on sensors, controllers and motors to replace the traditionally mechanical transmission mechanism to realize steering functions. However, the sensors in the SBW system are particularly vulnerable to external influences, which can cause systemic faults, leading to poor steering performance and even system instability. Therefore, this paper aims to adopt a fault-tolerant control method to solve the safety problem of the SBW system caused by sensors failure.

This paper proposes an active fault-tolerant control framework to deal with sensors failure in the SBW system by hierarchically introducing fault observer, fault estimator, fault reconstructor. Firstly, the fault observer is used to obtain the observation output of the SBW system and then obtain the residual between the observation output and the SBW system output. And then judge whether the SBW system fails according to the residual. Secondly, dependent on the residual obtained by the fault observer, a fault estimator is designed using bounded real lemma and regional pole configuration to estimate the amplitude and time-varying characteristics of the faulty sensor. Eventually, a fault reconstructor is designed based on the estimation value of sensors fault obtained by the fault estimator and SBW system output to tolerate the faulty sensor.

The numerical analysis shows that the fault observer can be rapidly activated to detect the fault while the sensors fault occurs. Moreover, the estimation accuracy of the fault estimator can reach to 98%, and the fault reconstructor can make the faulty SBW system to retain the steering characteristics, comparing to those of the fault-free SBW system. In addition, it was verified for the feasibility and effectiveness of the proposed control framework.

As the SBW fault diagnosis and fault-tolerant control in this paper only carry out numerical simulation research on sensors faults in matrix and laboratory/Simulink, the subsequent hardware in the loop test is needed for further verification.

Aiming at the SBW system with parameter perturbation and sensors failure, this paper proposes an active fault-tolerant control framework, which integrates fault observer, fault estimator and fault reconstructor so that the steering performance of SBW system with sensors faults is basically consistent with that of the fault-free SBW system.

Drought is the primary disaster that negatively impacts agricultural and animal husbandry production. It can lead to crop reduction and even pose a threat to human survival in environmentally sensitive areas of China (ESAC). However, the phases and periodicity of drought changes in the ESAC remain largely unknown. Thus, this paper aims to identify the periodic characteristics of meteorological drought changes.

The potential evapotranspiration was calculated using the Penman–Monteith formula recommended by the Food and Agriculture Organization of the United Nations, whereas the standardized precipitation evaporation index (SPEI) of drought was simulated by coupling precipitation data. Subsequently, the Bernaola-Galvan segmentation algorithm was proposed to divide the periods of drought change and the newly developed extreme-point symmetric mode decomposition to analyze the periodic drought patterns.

The findings reveal a significant increase in SPEI in the ESAC, with the rate of decline in drought events higher in the ESAC than in China, indicating a more pronounced wetting trend in the study area. Spatially, the northeast region showed an evident drying trend, whereas the southwest region showed a wetting trend. Two abrupt changes in the drought pattern were observed during the study period, namely, in 1965 and 1983. The spatial instability of moderate or severe drought frequency and intensity on a seasonal scale was more consistent during 1966–1983 and 1984–2018, compared to 1961–1965. Drought variation was predominantly influenced by interannual oscillations, with the periods of the components of intrinsic mode functions 1 (IMF1) and 2 (IMF2) being 3.1 and 7.3 years, respectively. Their cumulative variance contribution rate reached 70.22%.

The trend decomposition and periods of droughts in the study area were analyzed, which may provide an important scientific reference for water resource management and agricultural production activities in the ESAC. However, several problems remain unaddressed. First, the SPEI considers only precipitation and evapotranspiration, making it extremely sensitive to temperature increases. It also ignores the nonstationary nature of the hydrometeorological water process; therefore, it is prone to bias in drought detection and may overestimate the intensity and duration of droughts. Therefore, further studies on the application and comparison of various drought indices should be conducted to develop a more effective meteorological drought index. Second, the local water budget is mainly affected by surface evapotranspiration and precipitation. Evapotranspiration is calculated by various methods that provide different results. Therefore, future studies need to explore both the advantages and disadvantages of various evapotranspiration calculation methods (e.g. Hargreaves, Thornthwaite and Penman–Monteith) and their application scenarios. Third, this study focused on the temporal and spatial evolution and periodic characteristics of droughts, without considering the driving mechanisms behind them and their impact on the ecosystem. In future, it will be necessary to focus on a sensitivity analysis of drought indices with regard to climate change. Finally, although this study calculated the SPEI using meteorological data provided by China’s high-density observatory network, deviations and uncertainties were inevitable in the point-to-grid spatialization process. This shortcoming may be avoided by using satellite remote sensing data with high spatiotemporal resolution in the future, which can allow pixel-scale monitoring and simulation of meteorological drought evolution.

Under the background of continuous global warming, the climate in arid and semiarid areas of China has shown a trend of warming and wetting. It means that the plant environment in this region is getting better. In the future, the project of afforestation and returning farmland to forest and grassland in this region can increase the planting proportion of water-loving tree species to obtain better ecological benefits. Meanwhile, this study found that in the relatively water-scarce regions of China, drought duration was dominated by interannual oscillations (3.1a and 7.3a). This suggests that governments and nongovernmental organizations in the region should pay attention to the short drought period in the ESAC when they carry out ecological restoration and protection projects such as the construction of forest reserves and high-quality farmland.

The findings enhance the understanding of the phasic and periodic characteristics of drought changes in the ESAC. Future studies on the stress effects of drought on crop yield may consider these effects to better reflect the agricultural response to meteorological drought and thus effectively improve the tolerance of agricultural activities to drought events.

The purpose of this study is to assess the spatiotemporal patterns of future meteorological drought in the Yellow River Basin under different representative concentration pathway (RCP) scenarios.

Delta method is used to process the future climate data of the global climate models, then analyzed the spatiotemporal variation trend of drought in the Yellow River Basin based on standardized precipitation evaporation index (SPEI) under four RCP scenarios.

This research was funded by the National Natural Science Foundation of China (41901239), Soft Science Research Project of Henan Province (212400410077, 192400410085), the National Key Research and Development Program of China (2016YFA0602703), China Postdoctoral Science Foundation (2018M640670) and the special fund of top talents in Henan Agricultural University (30501031).

This study can provide support for future meteorological drought management and prevention in the Yellow River Basin and provide a theoretical basis for water resources management.

Let H be a connected subgraph of a connected graph G. The H-structure connectivity of the graph G, denoted by κ(G;H), is the minimum cardinality of a minimal set of subgraphs F={H1′,H2′,…,Hm′} in G, such that every H′i∈F is isomorphic to H and removal of F from G will disconnect G. The H-substructure connectivity of the graph G, denoted by κs(G;H), is the minimum cardinality of a minimal set of subgraphs F={J1′,J2′,…,Jm′} in G, such that every Ji′∈F is a connected subgraph of H and removal of F from G will disconnect G. In this paper, we provide the H-structure and the H-substructure connectivity of the circulant graph Cir(n,Ω) where Ω={1,…,k,n−k,…,n−1},1≤k≤⌊n2⌋ and the hypercube Qn for some connected subgraphs H.

Coastal zone ecological restoration project is of great significance to alleviate marine ecological degradation. Evaluating the effect of coastal ecological restoration projects and identifying the obstacle factors affecting their restoration level can provide an empirical basis for future Marine ecological restoration projects.

However, due to the initial stage of coastal zone ecological restoration projects, the actual monitoring data of coastal zone ecological restoration is relatively lacking. Based on the CRITIC-TOPSIS (combination of CRITIC method and TOPSIS method) method, combined with the subjective perception of the public and the actual data of the restoration project, this paper proposes an evaluation method of the coastal zone ecological restoration effect to obtain the specific implementation effect of the coastal zone ecological restoration project. The main obstacle factors affecting the evaluation of coastal ecological restoration effect are identified by using the obstacle degree model.

This paper conducted an empirical study on the restoration of sandy shoreline and coastal wetland in Qinhuangdao city. Based on the data of restoration projects and the subjective perception of ecological restoration by the public in Qinhuangdao city, the research results showed that the coastal zone ecological restoration effect of Qinhuangdao city was general. The quality of the restoration project and the public perception have an important influence on the evaluation of the restoration effect. Improving the quality of the restoration project, strengthening the public's participation in ecological restoration and allowing the public to better participate in the ecological restoration of the coastal zone can improve the effect of ecological restoration of the coastal zone in an all-round way.

The research results of this paper have a guiding role in the ecological restoration of coastal cities in the future, and also have a demonstration and reference role for the assessment of the effect of ecological restoration of coastal zones.

The study aims to provide a basis for the effective use of safety-related information data and a quantitative assessment way for the occurrence probability of the safety risk such as the fatigue fracture of the key components.

The fatigue crack growth rate is of dispersion, which is often used to accurately describe with probability density. In view of the external dispersion caused by the load, a simple and applicable probability expression of fatigue crack growth rate is adopted based on the fatigue growth theory. Considering the isolation among the pairs of crack length a and crack formation time t (a∼t data) obtained from same kind of structural parts, a statistical analysis approach of t distribution is proposed, which divides the crack length in several segments. Furthermore, according to the compatibility criterion of crack growth, that is, there is statistical development correspondence among a∼t data, the probability model of crack growth rate is established.

The results show that the crack growth rate in the stable growth stage can be approximately expressed by the crack growth control curve da/dt = Q•a, and the probability density of the crack growth parameter Q represents the external dispersion; t follows two-parameter Weibull distribution in certain a values.

The probability density f(Q) can be estimated by using the probability model of crack growth rate, and a calculation example shows that the estimation method is effective and practical.

This study aims to use regression Least-Square Support Vector Machine (LS-SVM) as a probabilistic model to determine the factor of safety (FS) and probability of failure (PF) of anisotropic soil slopes.

This research uses machine learning (ML) techniques to predict soil slope failure. Due to the lack of analytical solutions for measuring FS and PF, it is more convenient to use surrogate models like probabilistic modeling, which is suitable for performing repetitive calculations to compute the effect of uncertainty on the anisotropic soil slope stability. The study first uses the Limit Equilibrium Method (LEM) based on a probabilistic evaluation over the Latin Hypercube Sampling (LHS) technique for two anisotropic soil slope profiles to assess FS and PF. Then, using one of the supervised methods of ML named LS-SVM, the outcomes (FS and PF) were compared to evaluate the efficiency of the LS-SVM method in predicting the stability of such complex soil slope profiles.

This method increases the computational performance of low-probability analysis significantly. The compared results by FS-PF plots show that the proposed method is valuable for analyzing complex slopes under different probabilistic distributions. Accordingly, to obtain a precise estimate of slope stability, all layers must be included in the probabilistic modeling in the LS-SVM method.

Combining LS-SVM and LEM offers a unique and innovative approach to address the anisotropic behavior of soil slope stability analysis. The initiative part of this paper is to evaluate the stability of an anisotropic soil slope based on one ML method, the Least-Square Support Vector Machine (LS-SVM). The soil slope is defined as complex because there are uncertainties in the slope profile characteristics transformed to LS-SVM. Consequently, several input parameters are effective in finding FS and PF as output parameters.

To cope with the severe situation of the global climate, China proposed the “30 60” dual-carbon strategic goal. Based on this background, the purpose of this paper is to investigate scientifically and reasonably the interprovincial pattern of China’s power carbon emission intensity and further explore the causes of differences on this basis.

Considering the principle of “shared but differentiated responsibilities,” this study measures the carbon emissions within the power industry from 1997 to 2019 scientifically, via the panel data of 30 provinces in China. The power carbon emission intensity is chosen as the indicator. Using the Dagum Gini coefficient to explore regional differences and their causes.

The results of this paper show that, first, China’s carbon emission intensity from the power industry overall is significantly different. From the perspective of geospatial distribution, the three regions have unbalanced characteristics. Second, according to the decomposition results of the Gini coefficient, the overall difference in power carbon emission intensity is generally expanding. The geospatial and economic development levels are examined separately. The gaps between the eastern and economically developed regions are the smallest, and the regional differences are the source of the overall disparity.

Further exploring the causes of differences on this basis is crucial for relevant departments to formulate differentiated energy conservation and emission reduction policies. This study provides direction for analyzing the green and low carbon development of China’s power industry.

As an economic indicator of green and low-carbon development, CO₂ intensity of power industry can directly reflect the dependence of economic growth on the high emission of electricity and energy. and further exploring the causes of differences on this basis is crucial for relevant departments to formulate differentiated energy conservation and emission reduction policies.

For a long time, with the rapid economic development, resulting in the unresolved contradiction between low energy efficiency and high carbon emissions. To this end, scientifically and reasonably investigating the interprovincial pattern of China’s power carbon emission intensity, and further exploring the causes of differences on this basis, is crucial for relevant departments to formulate differentiated energy conservation and emission reduction policies.

Third, considering the influence of spatial factors on the convergence of power carbon emission intensity, a variety of different spatial weight matrices are selected. Based on the β-convergence theory from both absolute and conditional perspectives, we dig deeper into the spatial convergence of electricity carbon emission intensity across the country and the three regions.

Organizations in many domains generate a considerable amount of heterogeneous data every day. Such data can be processed to enhance these organizations’ decisions in real time. However, storing and processing large and varied datasets (known as big data) is challenging to do in real time. In machine learning, streaming feature selection has always been considered a superior technique for selecting the relevant subset features from highly dimensional data and thus reducing learning complexity. In the relevant literature, streaming feature selection refers to the features that arrive consecutively over time; despite a lack of exact figure on the number of features, numbers of instances are well-established. Many scholars in the field have proposed streaming-feature-selection algorithms in attempts to find the proper solution to this problem. This paper presents an exhaustive and methodological introduction of these techniques. This study provides a review of the traditional feature-selection algorithms and then scrutinizes the current algorithms that use streaming feature selection to determine their strengths and weaknesses. The survey also sheds light on the ongoing challenges in big-data research.