Search results

This study aims to explore the formation mechanism of aerodynamic noise of a high-speed maglev train and understand the characteristics of dipole and quadrupole sound sources of the maglev train at different speed levels.

Based on large eddy simulation (LES) method and Kirchhoff–Ffowcs Williams and Hawkings (K-FWH) equations, the characteristics of dipole and quadrupole sound sources of maglev trains at different speed levels were simulated and analyzed by constructing reasonable penetrable integral surface.

The spatial disturbance resulting from the separation of the boundary layer in the streamlined area of the tail car is the source of aerodynamic sound of the maglev train. The dipole sources of the train are mainly distributed around the radio terminals of the head and tail cars of the maglev train, the bottom of the arms of the streamlined parts of the head and tail cars and the nose tip area of the streamlined part of the tail car, and the quadrupole sources are mainly distributed in the wake area. When the train runs at three speed levels of 400, 500 and 600 km·h⁻¹, respectively, the radiated energy of quadrupole source is 62.4%, 63.3% and 71.7%, respectively, which exceeds that of dipole sources.

This study can help understand the aerodynamic noise characteristics generated by the high-speed maglev train and provide a reference for the optimization design of its aerodynamic shape.

What is the relation between the land system with Chinese characteristics and the country's high-speed economic growth in the past decades? There is a lack of rigorous academic research based on the general equilibrium theory of macroeconomics on this issue.

By building a multisector dynamic general equilibrium framework with land system, this paper explores how the land supply mode with Chinese characteristics affects China's economic growth as well as its transmission mechanism.

This paper confirms the importance of land system with Chinese characteristics in explaining the mystery of China's high-speed economic growth. Counterfactual analysis shows that if China adopts a land system similar to that of other developing countries, GDP will drop 36% from the current level under the baseline model.

As the industrial sector shrinks relatively and the output elasticity of infrastructure decreases, this inhibitory effect will become more apparent. China should improve its land supply mode, especially expand the supply of commercial and residential land and reduce the cost of land in the service sector. This can promote better economic development in the future and thus improve household welfare and the structure of aggregate demand, replace “land-based public finance” and thus inhibit the “high leverage” risks of local governments.

This study presents a systematic literature review (SLR) of the interdisciplinary literature on drones in last-mile delivery (LMD) to extrapolate pertinent insights from and into the logistics management field.

Rooting their analytical categories in the LMD literature, the authors performed a deductive, theory refinement SLR on 307 interdisciplinary journal articles published during 2015–2022 to integrate this emergent phenomenon into the field.

The authors derived the potentials, challenges and solutions of drone deliveries in relation to 12 LMD criteria dispersed across four stakeholder groups: senders, receivers, regulators and societies. Relationships between these criteria were also identified.

This review contributes to logistics management by offering a current, nuanced and multifaceted discussion of drones' potential to improve the LMD process together with the challenges and solutions involved.

The authors provide logistics managers with a holistic roadmap to help them make informed decisions about adopting drones in their delivery systems. Regulators and society members also gain insights into the prospects, requirements and repercussions of drone deliveries.

This is one of the first SLRs on drone applications in LMD from a logistics management perspective.

This study aims to investigate the effects of board cultural diversity (BCD) and board gender diversity (BGD) of the board of directors on environmental, social and governance (ESG) performance in the European banking sector using resource-based view (RBV) theory. In addition, this study analyses the linkages between BCD and BGD and knowledge sharing on the board of directors to improve ESG performance.

This study selected a sample of European-listed banks covering the period 2021. ESG and diversity variables were collected from Refinitiv Eikon and analysed using the ordinary least squares model. This study was conducted in the European context regulated by Directive 95/2014/EU, which requires sustainability disclosure. The original population was represented by 250 banks; after missing data were excluded, the final sample comprised 96 European-listed banks.

The findings highlight the positive linkages between BGD, BCD and ESG scores in the European banking sector. In addition, the findings highlight that diversity contributes to knowledge sharing by improving ESG performance in a regulated sector. Nonetheless, the combined effect of BGD and BCD negatively impacts ESG performance.

To the best of the authors’ knowledge, this is the first study to measure and analyse a regulated sector, such as banking, and the relationship between cultural and gender diversity for sharing knowledge under the RBV theory lens in the ESG framework.

Despite the growing interest in bibliometric studies within tourism management, there remains a gap in understanding the current research trends within the domain of tourism supply chain management (SCM). Therefore, this study aims to examine the publication trends, identify the most active stakeholders and highlight the most influential publications and major themes in the field of tourism SCM during the period 2001–2023. The main results reveal several themes, including “exploring inclusive growth and poverty reduction through tourism supply chain and value chain analysis,” “sustainable SCM and competition in tourism: a tour operator’s perspective,” “tourism SCM in different facets,” and “sustainability and information technology in tourism SCM.” Additional themes include “competitive strategies and medical tourism SCM,” “culinary tourism and performance measurement in tourism value chains,” and “performance measurement in tourism SCM”.

This paper aims to examine the extent to which the presence of women in governance and top management positions is likely to affect corporate environmental, social and governance (ESG) performance. This study also examines the interaction effect between female leadership and cultural leadership in the boardroom.

The empirical quantitative paper covers a sample of French-listed non-financial companies from 2018 to 2022 (925 firm-year observations). France is the European Union pioneer of non-financial reporting and gender equality policies. A fixed-effect panel regression analysis was estimated to unveil the links between the presence of women in governance and top management positions and ESG performance.

Results show that appointing more women on the board of directors and executive team is conducive to higher ESG performance. Nevertheless, the interaction effect between female and cultural leadership does not impact ESG performance.

This study contributes to the accounting and corporate governance literature on gender diversity and ESG performance by investigating female leadership in both directorship and top executive roles.

This review aims to give a critical view of the wheel/rail high frequency vibration-induced vibration fatigue in railway bogie.

Vibration fatigue of railway bogie arising from the wheel/rail high frequency vibration has become the main concern of railway operators. Previous reviews usually focused on the formation mechanism of wheel/rail high frequency vibration. This paper thus gives a critical review of the vibration fatigue of railway bogie owing to the short-pitch irregularities-induced high frequency vibration, including a brief introduction of short-pitch irregularities, associated high frequency vibration in railway bogie, typical vibration fatigue failure cases of railway bogie and methodologies used for the assessment of vibration fatigue and research gaps.

The results showed that the resulting excitation frequencies of short-pitch irregularity vary substantially due to different track types and formation mechanisms. The axle box-mounted components are much more vulnerable to vibration fatigue compared with other components. The wheel polygonal wear and rail corrugation-induced high frequency vibration is the main driving force of fatigue failure, and the fatigue crack usually initiates from the defect of the weld seam. Vibration spectrum for attachments of railway bogie defined in the standard underestimates the vibration level arising from the short-pitch irregularities. The current investigations on vibration fatigue mainly focus on the methods to improve the accuracy of fatigue damage assessment, and a systematical design method for vibration fatigue remains a huge gap to improve the survival probability when the rail vehicle is subjected to vibration fatigue.

The research can facilitate the development of a new methodology to improve the fatigue life of railway vehicles when subjected to wheel/rail high frequency vibration.

This paper aims to build a scientific evaluation index system for regional low-carbon circular economic development. Taking Sichuan Province as the empirical research object, the paper evaluates its low-carbon circular economy (LCCE) development level and proposes policy recommendations for climate change improvement based on the evaluation results.

This paper, first, built an evaluation index system with 30 indicators within six subsystems, namely, economic development, social progress, energy consumption, low-carbon emissions, carbon sink capacity and environmental carrying capacity. Second, develop an “entropy weight-grey correlation” evaluation method. Finally, from a practical point of view, measure the development level of LCCE in Sichuan Province, China, from 2008 to 2018.

It was found that Sichuan LCCE development had a general downward trend from 2008 to 2012 and a steady upward trend from 2012 to 2018; however, the overall level was low. The main factors affecting the LCCE development are lagging energy consumption and environmental carrying capacity subsystem developments.

This paper puts forward relevant suggestions for improving the development of a low-carbon economy and climate change for the reference of policymakers.

This paper built an evaluation index system with 30 indicators for regional low carbon circular economic development. The evaluation method of “entropy weight-grey correlation” is used to measure the development level of regional LCCE in Sichuan Province, China.

Researchers agree that collaboration networks can be an important implement in a firm’s innovation process, but there is limited empirical evidence on actually how they facilitate the new product development (NPD). The paper aims to discuss these issues.

Using longitudinal and multisource data on a sample of firms engaged in the Chinese automobile industry, the authors examine the structural properties of collaboration networks and their possible influences on firms’ NPD performance.

The results indicate that the structural features of the technology-based collaboration networks in the automobile industry have a low degree of collaborative integration and they influence firms’ NPD performance in diverse ways. The authors find that the direct ties, indirect ties and structural holes of the collaboration networks are all positively associated with firms’ number of new products. However, the authors have not found the evidence that the number of direct ties can moderate the relationship between the indirect ties and the NPD performance.

First, previous researches concerning the network mainly focused on their influence on technology innovation, few scholars studied the relationship between collaboration network and NPD. Second, the data used in this paper are true and valid, they are all from relevant departments of the Chinese government. Third, the empirical research of new products in China’s manufacturing industry is relatively new.

This study aims to ensure reliable analysis of dynamic responses in asphalt pavement structures. It investigates noise reduction and data mining techniques for pavement dynamic response signals.

The paper conducts time-frequency analysis on signals of pavement dynamic response initially. It also uses two common noise reduction methods, namely, low-pass filtering and wavelet decomposition reconstruction, to evaluate their effectiveness in reducing noise in these signals. Furthermore, as these signals are generated in response to vehicle loading, they contain a substantial amount of data and are prone to environmental interference, potentially resulting in outliers. Hence, it becomes crucial to extract dynamic strain response features (e.g. peaks and peak intervals) in real-time and efficiently.

The study introduces an improved density-based spatial clustering of applications with Noise (DBSCAN) algorithm for identifying outliers in denoised data. The results demonstrate that low-pass filtering is highly effective in reducing noise in pavement dynamic response signals within specified frequency ranges. The improved DBSCAN algorithm effectively identifies outliers in these signals through testing. Furthermore, the peak detection process, using the enhanced findpeaks function, consistently achieves excellent performance in identifying peak values, even when complex multi-axle heavy-duty truck strain signals are present.

The authors identified a suitable frequency domain range for low-pass filtering in asphalt road dynamic response signals, revealing minimal amplitude loss and effective strain information reflection between road layers. Furthermore, the authors introduced the DBSCAN-based anomaly data detection method and enhancements to the Matlab findpeaks function, enabling the detection of anomalies in road sensor data and automated peak identification.