Search results

This study purposes to study the influence of artificial freezing on the liquefaction characteristics of Nanjing sand, as well as its mechanism.

was studied through dynamic triaxial tests by means of the GDS dynamic triaxial system on Nanjing sand extensively discovered in the middle and lower reaches of the Yangtze River under seismic load and metro train vibration load, respectively, and potential hazards of the two loads to the freezing construction of Nanjing sand were also identified in the tests.

The results show that under both seismic load and metro train vibration load, freeze-thaw cycles will significantly reduce the stiffness and liquefaction resistance of Nanjing sand, especially in the first freeze-thaw cycle; the more freeze-thaw cycles, the worse structural behaviors of silty-fine sand, and the easier to liquefy; freeze-thaw cycles will increase the sensitivity of Nanjing sand's dynamic pore pressure to dynamic load response; the lower the freezing temperature and the effective confining pressure, the worse the liquefaction resistance of Nanjing sand after freeze-thaw cycles; compared to the metro train vibration load, the seismic load in Nanjing is potentially less dangerous to freezing construction of Nanjing sand.

The research results are helpful to the construction of the artificial ground freezing of the subway crossing passage in the lower reaches of the Yangtze River and to ensure the construction safety of the subway tunnel and its crossing passage.

The purpose of this article is based on the unit patent license fee model in the closed-loop supply chain.

This paper analyzes the impact of the bundling strategy of the retailer selling new products and remanufactured products on the closed-loop supply chain under the condition that the original manufacturer produces new products and the remanufacturer produces remanufacturing products.

The results show that alternative products can be bundled, and in many cases, the bundling of remanufactured products and new products is better than selling alone.

If the retailer chooses bundling, for the remanufacturer, when certain conditions are met, the benefits of bundling are greater than the separate sales at that time; for the original manufacturer, when the recycling price sensitivity coefficient is high, the bundling is better than separate sales.

This study aims to explore how manufacturing firms master customer lock-in through value creation by servitization innovation strategies from the perspective of asset specificity.

A multiple case study with triangulation fashion is adopted to identify servitization innovation strategies. Several manufacturing firms were investigated, which are distributed in different positions of the value chain. Content analysis and abductive approaches are adopted to analyze the data. Moreover, an in-depth interview and participatory observation were conducted to refine the analysis results.

This study identified four different focusing points of servitization operations. Based on these, the paper further induces an innovative servitization strategy matrix of customer lock-in, concerning communion, intellectual, existential and insubstantial strategies. Furthermore, a conceptual model of customer lock-in by servitization innovation from the perspective of asset specificity is elaborated. It is suggested that companies can use tangible or intangible resources by sharing or storing operations to create servitization value.

This study theoretically proposes a conceptual model to extend servitization innovation as an intangible asset and adopt the new perspective of asset specificity to illustrate the value creation in servitization to generate customer lock-in.

This study presents a systematic literature review (SLR) of the interdisciplinary literature on drones in last-mile delivery (LMD) to extrapolate pertinent insights from and into the logistics management field.

Rooting their analytical categories in the LMD literature, the authors performed a deductive, theory refinement SLR on 307 interdisciplinary journal articles published during 2015–2022 to integrate this emergent phenomenon into the field.

The authors derived the potentials, challenges and solutions of drone deliveries in relation to 12 LMD criteria dispersed across four stakeholder groups: senders, receivers, regulators and societies. Relationships between these criteria were also identified.

This review contributes to logistics management by offering a current, nuanced and multifaceted discussion of drones' potential to improve the LMD process together with the challenges and solutions involved.

The authors provide logistics managers with a holistic roadmap to help them make informed decisions about adopting drones in their delivery systems. Regulators and society members also gain insights into the prospects, requirements and repercussions of drone deliveries.

This is one of the first SLRs on drone applications in LMD from a logistics management perspective.

In confronting the challenge of climate change and progressing towards dual carbon goals, China is actively implementing low-carbon city pilot policy. This paper aims to focus on the potential impact of this policy on enterprise green governance, aiming to promote the reduction and balance of carbon emissions.

Based on the panel data of China's large-scale industrial enterprises from 2007 to 2013, this paper uses the Difference-in-differences (DID) method to study the impact and path mechanism of the implementation of low-carbon city pilot policy on enterprise green governance. Heterogeneity analysis is used to compare the effects of low-carbon city pilot policy in different regions, different enterprises and different industries.

The low-carbon pilot can indeed effectively enhance corporate green governance, a conclusion that still holds after a series of robustness tests. The low-carbon city pilot policy mainly enhances enterprise green governance through two paths: an industrial structure upgrade and enterprise energy consumption, and it improves green governance by reducing enterprise energy consumption through industrial structure upgrade. The impact of low-carbon city pilot policy on enterprise green governance shows significant differences across different regions, different enterprises and different industries.

This paper examines the impact of low-carbon city pilot policy on enterprise green governance. However, due to availability of data, there are still some limitations to be further tackled. The parallel trend test in this paper shows that the pilot policy has a significant positive effect on the green governance of enterprises. However, due to serious lack of data in some years, the authors only selected the enterprise data of a shorter period as our experimental data, which leads the results to still have certain deficiencies. For the verification of the impact mechanism, the conclusions obtained in this paper are relatively limited. Although all the mechanism tests are passed, the reliability of the results still needs to be further tested through future data samples. In addition, as the pilot policy of low-carbon cities is still in progress, the policy can be tracked and analysed in the future as more data are disclosed, and further research can be carried out through dimensional expansion.

Low-carbon city pilot policy plays an important role in inducing the green governance of enterprises. Therefore, policy makers can continue to strengthen the construction of low-carbon city pilots by refining pilot experience, building typical cases, actively promoting pilot policy experience, expanding pilot scope and enhancing the implementation efficiency of pilot policy nationwide, which will contribute to the optimization and upgrading of the regional industrial structure at the urban level and will provide experience and reference for the synergistic implementation plan of pollution reduction and carbon reduction.

The impact of the low-carbon city pilot policy on enterprise green governance not only exists in two separate paths of urban industrial upgrading and enterprise energy consumption but also exists in a chain transmission path from macro to micro. The authors find that the effect value of each influence path is different, and there is an obvious leading influence path for the role of enterprise green governance. Therefore, in the process of implementing a low-carbon city pilot policy, policies should be designed specifically for different mechanisms. Moreover, complementing and coordinating several paths should be advocated to give full play to the green governance effect of enterprises brought by different paths and to further expand the scope of industries and enterprises where policies play a role.

To the best of the authors’ knowledge, for the first time, this paper connects macro mechanisms with micro mechanisms, discovering a macro-to-micro transmission mechanism in the process of low-carbon city pilot policy affecting enterprise green governance. That is, the low-carbon city pilot policy can facilitate industrial structure upgrading, resulting in reduced enterprise energy consumption, ultimately enhancing enterprise green governance.

On-ramp merging areas are typical bottlenecks in the freeway network since merging on-ramp vehicles may cause intensive disturbances on the mainline traffic flow and lead to various negative impacts on traffic efficiency and safety. The connected and autonomous vehicles (CAVs), with their capabilities of real-time communication and precise motion control, hold a great potential to facilitate ramp merging operation through enhanced coordination strategies. This paper aims to present a comprehensive review of the existing ramp merging strategies leveraging CAVs, focusing on the latest trends and developments in the research field.

The review comprehensively covers 44 papers recently published in leading transportation journals. Based on the application context, control strategies are categorized into three categories: merging into sing-lane freeways with total CAVs, merging into sing-lane freeways with mixed traffic flows and merging into multilane freeways.

Relevant literature is reviewed regarding the required technologies, control decision level, applied methods and impacts on traffic performance. More importantly, the authors identify the existing research gaps and provide insightful discussions on the potential and promising directions for future research based on the review, which facilitates further advancement in this research topic.

Many strategies based on the communication and automation capabilities of CAVs have been developed over the past decades, devoted to facilitating the merging/lane-changing maneuvers at freeway on-ramps. Despite the significant progress made, an up-to-date review covering these latest developments is missing to the authors’ best knowledge. This paper conducts a thorough review of the cooperation/coordination strategies that facilitate freeway on-ramp merging using CAVs, focusing on the latest developments in this field. Based on the review, the authors identify the existing research gaps in CAV ramp merging and discuss the potential and promising future research directions to address the gaps.

The density peak clustering algorithm (DP) is proposed to identify cluster centers by two parameters, i.e. ρ value (local density) and δ value (the distance between a point and another point with a higher ρ value). According to the center-identifying principle of the DP, the potential cluster centers should have a higher ρ value and a higher δ value than other points. However, this principle may limit the DP from identifying some categories with multi-centers or the centers in lower-density regions. In addition, the improper assignment strategy of the DP could cause a wrong assignment result for the non-center points. This paper aims to address the aforementioned issues and improve the clustering performance of the DP.

First, to identify as many potential cluster centers as possible, the authors construct a point-domain by introducing the pinhole imaging strategy to extend the searching range of the potential cluster centers. Second, they design different novel calculation methods for calculating the domain distance, point-domain density and domain similarity. Third, they adopt domain similarity to achieve the domain merging process and optimize the final clustering results.

The experimental results on analyzing 12 synthetic data sets and 12 real-world data sets show that two-stage density peak clustering based on multi-strategy optimization (TMsDP) outperforms the DP and other state-of-the-art algorithms.

The authors propose a novel DP-based clustering method, i.e. TMsDP, and transform the relationship between points into that between domains to ultimately further optimize the clustering performance of the DP.

This paper examines the different features of China's economic development in different stages of economic globalization. The study finds that the investment- and export-based growth model drove China's high-speed economic growth between 2000 and 2007, which came into existence around 2000 when China plugged into the global production network.

This paper also finds that China slowed down to the New Normal because of the disruption to the socio-economic underpinnings of this growth model. As China adapts to and steers the New Normal, supply-side structural reforms can channel excess capacity to the construction of underground pipe networks in rural areas of central China and fix capital while advance rural revitalization.

At the same time, enterprises must strive to build a key component development platform for key component innovation and the standard-setting power in global manufacturing.

The establishment of a domestic production network integrating the integrated innovation-driven core enterprises and modular producers at different levels can satisfy the dynamic demand structure of China in which standardized demands and personalized demands coexist.

This study aims to provide a systematic and complete knowledge map for use by researchers working in the field of research data. Additionally, the aim is to help them quickly understand the authors' collaboration characteristics, institutional collaboration characteristics, trending research topics, evolutionary trends and research frontiers of scholars from the perspective of library informatics.

The authors adopt the bibliometric method, and with the help of bibliometric analysis software CiteSpace and VOSviewer, quantitatively analyze the retrieved literature data. The analysis results are presented in the form of tables and visualization maps in this paper.

The research results from this study show that collaboration between scholars and institutions is weak. It also identified the current hotspots in the field of research data, these being: data literacy education, research data sharing, data integration management and joint library cataloguing and data research support services, among others. The important dimensions to consider for future research are the library's participation in a trans-organizational and trans-stage integration of research data, functional improvement of a research data sharing platform, practice of data literacy education methods and models, and improvement of research data service quality.

Previous literature reviews on research data are qualitative studies, while few are quantitative studies. Therefore, this paper uses quantitative research methods, such as bibliometrics, data mining and knowledge map, to reveal the research progress and trend systematically and intuitively on the research data topic based on published literature, and to provide a reference for the further study of this topic in the future.

This study aims to examined the impact of business intelligence (BI) and supply chain ambidexterity (SCA) on operational performance (OP), contributing to dwarf knowledge in small- and medium-sized enterprises (SMEs) in the context of emerging economies. The mediating role of SCA was considered in the proposed model.

The study used the quantitative method to investigate the interdependencies between variables. As a result, 216 senior and middle managers/owners of SMEs in Ghana were surveyed using a purposive and convenient sampling method. SPSS version 23 and Smart PLS version 3 were used to conduct the research.

While the direct link among BI, SCA and OP was confirmed. The outcome also showed that SCA plays a significant mediating role between BI and OP among SMEs.

The outcome of the study indicates that SCA encourages the use of BI to generate superior OP among SMEs. This knowledge will improve the performance of SMEs and their ability to withstand the competition in the global market.

With the discovery of this study, the theory of a resource-based view now has some empirical evidence behind it. As a result, SMEs prioritize aspects that could improve their operations and implement tactics that would nurture better performance and competitive advantages.