Search results

Productivity increase is correlated with profitability, sustainability and competitiveness of the construction firms. Recent studies reveal that the primary causes of productivity decline are poor usage of scientific and technological advances, ineffective supervision strategies and poor apprenticeship facilities/opportunities. Accordingly, the purpose of this study was to evaluate how well construction supervisors can utilise fundamental science and technological concepts/ideas to increase the efficiency and productivity of construction activities.

A new strategic layout was designed with the use of potential training guide tools. Based on the designed layout, a new supervisory training programme was developed, and 62 construction supervisors were selected, trained and evaluated in line with six parts of competencies and the relevant learning domains. An assessment guide with different levels of descriptions and criteria was developed through literature analysis and expert interviews. The research tools were verified using comprehensive approaches.

The overall mean values of supervisors’ performance scores indicate proficient-level grades in the competency characteristics related to taking measurements, generating drawings/designs using manual techniques and computer-aided tools, involving Bill of Quantities (BOQ) preparations and preparing training plans/materials for improving the competencies of labourers on estimation, measurements and understanding drawings. Their proficiency was notably lower in the use of information and communication technology application tools in construction tasks compared to others. The findings point to a modern generalised guideline that establishes the ranges of supervisory attributes associated with science and technology-related applications.

The study outcomes produce conceptualised projections to restructure and revalue the job functions of various working categories by adding new definitions within the specified scope. This may result in constructive benefits to upgrading the current functions associated with urbanisation, sustainability and society. The implementation of the study’s findings/conclusions will have a significant impact on present and future practices in other developing nations and developing industries, even if they are directly applicable to the Sri Lankan construction industry.

Up to certain limits/stages, the study fills not only the knowledge gap in the field of creating protocols and application techniques connected to lifelong learning and skill enhancement/upgrading but also the existing gaps in work attributes and roles of construction supervisors associated with the utilisation of fundamental science and technological concepts/ideas towards reinforcing sustainable and productive site operations.

A policy of surveillance which interferes with the fundamental right to a private life requires credible justification and a supportive evidence base. The authority for such interference should be clearly detailed in law, overseen by a transparent process and not left to the vagaries of administrative discretion. If a state surveils those it governs and claims the interference to be in the public interest, then the evidence base on which that claim stands and the operative conception of public interest should be subject to critical examination. Unfortunately, there is an inconsistency in the regulatory burden associated with access to confidential patient information for non-health-related surveillance purposes and access for health-related surveillance or research purposes. This inconsistency represents a systemic weakness to inform or challenge an evidence-based policy of non-health-related surveillance. This inconsistency is unjustified and undermines the qualities recognised to be necessary to maintain a trustworthy confidential public health service. Taking the withdrawn Memorandum of Understanding (MoU) between NHS Digital and the Home Office as a worked example, this chapter demonstrates how the capacity of the law to constrain the arbitrary or unwarranted exercise of power through judicial review is not sufficient to level the playing field. The authors recommend ‘levelling up’ in procedural oversight, and adopting independent mechanisms equivalent to those adopted for establishing the operative conceptions of public interest in the context of health research to non-health-related surveillance purposes.

Past studies highlight a wide range of labour-related problems resulting in productivity loss in the construction industry of many developing countries. This study aims to quantify the impacts of labour-related factors on the productivity of construction operations in Sri Lankan building projects based on the viewpoint of engineers and construction managers for upgrading management/organisational policies and practices.

Qualitative and quantitative approaches were used to identify the critical factors. Further, a series of industry consultative discussions were conducted through problem-based communication approaches to analyse the actions required.

A total of 21 factors were determined as critical, where skills shortage, labourers’ thinking abilities, work experience, knowledge in construction works and discipline were leading in the list. The statistical tests and the experts’ discussion outcomes ensured the validity and reliability of the study findings.

The study outcomes will contribute to finding out better ways for directing labour in the industry practices and revising organisational policies towards achieving higher productivity levels in construction operations. Though the study findings are limited to the Sri Lankan context, some findings may be tested in other developing countries in similar scenarios.

The study findings show why the identified factors are critical, how those influence construction practices and what actions need to be considered for addressing the industry’s productivity-related challenges. These can play a key role in upgrading the construction management practices and organisational policies to the near-future stages.

The sustainability of the construction industry is associated with the productivity, profitability and competitiveness of the firms, which are significantly affected by inefficient site supervision and labour management approaches. This study aims to use a case study with mixed methods to evaluate the site supervisory characteristics in labour management, labour performance assessment and labour productivity measurement towards developing meaningful guidelines in polishing construction supervision attributes.

Well-developed modern apprenticeship elements were applied to 62 construction supervisors who were selected using the snowball sampling method, and their relevant competency characteristics were assessed using a comprehensively developed grading mechanism connected with useful training manuals/tools. Academic reviews, experts’ consultations and other meticulous mixed approaches were applied at different stages of the research plan’s sequential layout.

The mean performance scores of supervisors indicate proficient-level grades in the competency characteristics related to applying efficient labour management procedures and developing-level grades in designing productivity measurement tools, performing assessments on efficiency and productivity and proposing enhancement practices on efficiency and productivity for site operations. The findings point to a modern generalised guideline that establishes the ranges of supervisory attributes within the scope of the study. The validity, reliability, adaptability and generalisability of the findings were assured by using pertinent statistical tests and professional assessments.

Though the study’s conclusions/findings are primarily applicable to the construction environment of a developing country comparable to the Sri Lankan context, they will considerably impact current/future industrial practices in various other countries and emerging industries.

The research has produced a conceptualised modern tool that guides determining the capacity levels of supervisory attributes for carrying out labour management, labour performance assessment and labour productivity measurement aspects in construction. The research has opened a pump that inflows new values of highly workable supervision features for strengthening the site management structures and filling the industry’s knowledge vacuum in the methodical execution of apprenticeships.

This paper comprehensively addresses the influence of chopped strand mat glass fiber-reinforced polymer (GFRP) patch configurations such as geometry, dimensions, position and the number of layers of patches, whether a single or double patch is used and how well debonding the area under the patch improves the strength of the cracked aluminum plates with different crack lengths.

Single-edge cracked aluminum specimens of 150 mm in length and 50 mm in width were tested using the tensile test. The cracked aluminum specimens were then repaired using GFRP patches with various configurations. A three-dimensional (3D) finite element method (FEM) was adopted to simulate the repaired cracked aluminum plates using composite patches to obtain the stress intensity factor (SIF). The numerical modeling and validation of ABAQUS software and the contour integral method for SIF calculations provide a valuable tool for further investigation and design optimization.

The width of the GFRP patches affected the efficiency of the rehabilitated cracked aluminum plate. Increasing patch width WP from 5 mm to 15 mm increases the peak load by 9.7 and 17.5%, respectively, if compared with the specimen without the patch. The efficiency of the GFRP patch in reducing the SIF increased as the number of layers increased, i.e. the maximum load was enhanced by 5%.

This study assessed repairing metallic structures using the chopped strand mat GFRP. Furthermore, it demonstrated the superiority of rectangular patches over semicircular ones, along with the benefit of using double patches for out-of-plane bending prevention and it emphasizes the detrimental effect of defects in the bonding area between the patch and the cracked component. This underlines the importance of proper surface preparation and bonding techniques for successful repair.

There are over 40 million amputees globally with more than 185,000 Americans losing their limbs every year. For most of the world, prosthetic devices remain too expensive and uncomfortable. This paper aims to outline advancements made by a multidisciplinary research group, interested in advancing the restoration of human motion through accessible lower limb prostheses.

Customization, comfort and functionality are the most important metrics reported by prosthetists and patients. The work of this paper presents the design and manufacturing of a custom made, cost-effective and functional three-dimensional (3D) printed transtibial prosthesis monocoque design. The design of the prosthesis integrates 3D imaging, modelling and optimization techniques coupled with additive manufacturing.

The successful fabrication of a functional monocoque prosthesis through 3D printing indicates the workflow may be a solution to the worldwide accessibility crisis. The digital workflow developed in this work offers great potential for providing prosthetic devices to rural communities, which lack access to skilled prosthetic physicians. The authors found that using the workflow together with 3D printing, this study can create custom monocoque prostheses (Figure 16). These prostheses are comfortable, functional and properly aligned. In comparison with traditional prosthetic devices, the authors slowered the average cost, weight and time of production by 95%, 55% and 95%, respectively.

This novel digital design and manufacturing workflow has the potential to democratize and globally proliferate access to prosthetic devices, which restore the patient’s mobility, quality of life and health. LIMBER’s toolbox can reach places where proper prosthetic and orthotic care is not available. The digital workflow reduces the cost of making custom devices by an order of magnitude, enabling broader reach, faster access and improved comfort. This is particularly important for children who grow quickly and need new devices every few months or years, timely access is both physically and psychologically important.

In this manuscript, the authors show the application of digital design techniques for fabricating prosthetic devices. The proposed workflow implements several advantageous changes and, most importantly, digitally blends the three components of a transtibial prosthesis into a single, 3D printable monocoque device. The development of a novel unibody transtibial device that is properly aligned and adjusted digitally, greatly reduces the number of visits an amputee must make to a clinic to have a certified prosthetist adjust and modify their prosthesis. The authors believe this novel workflow has the potential to ease the worldwide accessibility crisis for prostheses.

This study revisits the Great Canadian Grain Logistics Crisis of 2013-14 to explore the competitiveness of the country's grain exports. An approach to comprehending the dilemmas of the international grain supply chain and trade, and national logistics policy in an era of multinational corporations, draws upon the literature on global value chain analysis. This analysis identifies both the grain industry's global and local dimensions. An important literature on the 'politics’ of the supply chain is also called into play to discuss who controls what aspects. This task of interpreting the various steps in Canada's grain logistics chain recognizes the key economic actors - producers, grain companies, railway companies, port terminal operators and export buyers - and political struggles between them as they each seek to maximize their self-interest. Policy implications for streamlining logistics operations are drawn from identifying where changes in the supply chain arrangements have gained or lost opportunities in export markets, particularly in the Asia-Pacific region.

This study aims to provide a measurement model, and the underlying constructs and items, for Logistics 4.0 in manufacturing companies. Industry 4.0 technology for logistics processes has been termed Logistics 4.0. Logistics 4.0 and its elements have seen varied conceptualizations in the literature. The literature has mainly focused on conceptual and theoretical studies, which supports the notion that Logistics 4.0 is a relatively young area of research. Refinement of constructs and building consensus perspectives and definitions is necessary for practical and theoretical advances in this area.

Based on a detailed literature review and practitioner focus group interviews, items of Logistics 4.0 for manufacturing enterprises were further validated by using a large-scale survey with practicing experts from organizations located in Central Europe, the Northeastern United States of America and Northern Thailand. Exploratory and confirmatory factor analyses were used to define a measurement model for Logistics 4.0.

Based on 239 responses the exploratory and confirmatory factor analyses resulted in nine items and three factors for the final Logistics 4.0 measurement model. It combines “the leveraging of increased organizational capabilities” (factor 1) with “the rise of interconnection and material flow transparency” (factor 2) and “the setting up of autonomization in logistics processes” (factor 3).

Practitioners can use the proposed measurement model to assess their current level of maturity regarding the implementation of Logistics 4.0 practices. They can map the current state and derive appropriate implementation plans as well as benchmark against best practices across or between industries based on these metrics.

Logistics 4.0 is a relatively young research area, which necessitates greater development through empirical validation. To the best of the authors knowledge, an empirically validated multidimensional construct to measure Logistics 4.0 in manufacturing companies does not exist.

This paper explores how exaptive innovation process might be considered a useful innovation model in constraint-based environments. Through an in-depth case study, it illustrates clearly the antecedents of exaptation processes, which are particularly relevant in rapidly changing environments requiring new solutions under time and resource constraints.

The authors adopt a single case study approach that is particularly suitable in case of an inductive research design, which is required because of the novelty of the topic. The research is inspired by the use of the snorkeling mask EASYBREATH, commercialized by the giant Decathlon, as a medical device, a respirator to treat patients affected by coronavirus in Italy. The authors organized the evidence according to a novel taxonomy grounded in the literature.

The case study stimulates reflections on the existence of some antecedents to the exaptive innovation process in constraint-based environments: (1) the availability of specific actors in the innovation process; (2) the creation of platforms of interaction between people with different competences, nurtured by collective bottom-up financing systems; (3) the role of the community of makers, in particular, and of the 4th industrial revolution, in general, for creating enabling technologies; (4) multidisciplinary individual background of key actors in the innovation process is crucial to ensure the exaptive path to be in place.

This work has some limitations, due to the choice of limiting the analysis to a single case, nevertheless, it offers a first glance on a new technological trajectory available in constraint-based environments.

The case study results underline the importance of new digital collaboration platforms as knowledge multipliers, and illuminate on the potential of the fourth manufacturing revolution, which, through new technologies, creates opportunities for distributed forms of innovation that cross long distances.