Search results

Hyperbranched poly(ester-amide)s (HPEAs) have been synthesized from diethanolamine and maleic anhydride with ethylene glycol as a core monomer by using a two-step method, which are marked as Hupea polymers, and dehydration was carried out in xylene under reflux.

In comparison with Hupea polymers was synthesized by one-pot method, Hupea polymers synthesized by two-step method has different structure and rheological properties. The intermediate monomer and the resulting polymer are characterized by FTIR and NMR spectroscopies.

All of Mw, Mn and Mw/Mn of the hyperbranch polymers decrease with the core/monomer molar ratio increasing. The intrinsic viscosity ([η]) of the polymers decreases with Mw increasing in the investigated range of Mw and scales as [η]∼Mw-0.82, which implies that the molecular weight grew faster with core/monomer molar ratio decreasing than the volume in the investigated range of core/monomer molar ratio.

The hydrodynamic radius was calculated by using Einstein’s equation and scales as Rh ∼ Mw0.061, and the lower exponent reveals the slow growth in the volume of Hupea molecule. In addition, the viscosity of Hupea polymer in concentrated aqueous solution is independent of shear rate and slightly dependent on molecular weight.

Hyperbranched poly(ester-amide)s (HPEAs) were synthesized by using a two-step method, which had different structure and rheological properties.

Hupea polymers show different features from Hupea polymers in structure and rheological properties, which revealed that the synthesis process of HPEA has effect on its performance.

This paper aims to study the wear properties of electron beam melted Ti6Al4V (EBM-Ti6Al4V) in simulated body fluids for orthopedic implant biomedical applications compared with wrought Ti6Al4V (Wr-Ti6Al4V).

Wear properties of EBM-Ti6Al4V compared with Wr-Ti6Al4V against ZrO₂ and Al₂O₃ have been investigated under dry friction and the 25 Wt.% newborn calf serum (NCS) lubricated condition using a ball-on-disc apparatus reciprocating motion. The microstructure, composition and hardness of the samples were characterized using scanning electron microscopy (SEM), x-ray diffraction and a hardness tester, respectively. The contact angles with 25 Wt.% NCS were measured by a contact angle apparatus. The wear parameters, wear 2D and 3D morphology were obtained using a 3D white light interferometer and SEM.

EBM-Ti6Al4V yields a higher contact angle than the Wr-Ti6Al4V with the 25 Wt.% NCS. EBM-Ti6Al4V couplings exhibit lower coefficients of friction compared with the Wr-Ti6Al4V couplings under both conditions. There is only a slight difference in the wear resistance between the Wr-Ti6Al4V and EBM-Ti6Al4V alloys. Both Wr-Ti6Al4V and EBM-Ti6Al4V suffer from similar friction and wear mechanisms, i.e. adhesive and abrasive wear in dry friction, while abrasive wear under the NCS condition. The wear depth and wear volume of the ZrO₂ couplings are lower than those of the Al₂O₃ couplings under both conditions.

This paper helps to establish baseline bio-tribological data of additively manufactured Ti6Al4V by electron beam melting in simulated body fluids for orthopedic applications, which will promote the application of additive manufacturing in producing the orthopedic implant.

Online reviews serve as valuable sources of information, reflecting tourists’ attentions, preferences and sentiments. However, although the existing research has demonstrated that incorporating online review data can enhance the performance of tourism demand forecasting models, the reliability of online review data and consumers’ decision-making process have not been given adequate attention. To address the aforementioned problem, the purpose of this study is to forecast tourism demand using online review data derived from the analysis of review helpfulness.

The authors propose a novel “identification-first, forecasting-second” framework. This framework prioritizes the identification of helpful reviews through a comprehensive analysis of review helpfulness, followed by the integration of helpful online review data into the forecasting system. Using the SARIMAX model with helpful online review data sourced from TripAdvisor, this study forecasts tourist arrivals in Hong Kong during the period from August 2012 to June 2019. The SNAÏVE/SARIMA model was used as the benchmark model. Additionally, artificial intelligence models including long short-term memory, back propagation neural network, extreme learning machine and random forest models were used to assess the robustness of the results.

The results demonstrate that online review data are subject to noise and bias, which can adversely affect the accuracy of predictions when used directly. However, by identifying helpful online reviews beforehand and incorporating them into the forecasting process, a notable enhancement in predictive performance can be realized.

First, to the best of the authors’ knowledge, this study is one of the first to focus on the data issue of online reviews on tourism arrivals forecasting. Second, this study pioneers the integration of the consumer decision-making process into the domain of tourism demand forecasting, marking one of the earliest endeavors in this area. Third, this study makes a novel attempt to identify helpful online reviews based on reviews helpfulness analysis.

With the development of intelligent technology, deep learning has made significant progress and has been widely used in various fields. Deep learning is data-driven, and its training process requires a large amount of data to improve model performance. However, labeled data is expensive and not readily available.

To address the above problem, researchers have integrated semi-supervised and deep learning, using a limited number of labeled data and many unlabeled data to train models. In this paper, Generative Adversarial Networks (GANs) are analyzed as an entry point. Firstly, we discuss the current research on GANs in image super-resolution applications, including supervised, unsupervised, and semi-supervised learning approaches. Secondly, based on semi-supervised learning, different optimization methods are introduced as an example of image classification. Eventually, experimental comparisons and analyses of existing semi-supervised optimization methods based on GANs will be performed.

Following the analysis of the selected studies, we summarize the problems that existed during the research process and propose future research directions.

This paper reviews and analyzes research on generative adversarial networks for image super-resolution and classification from various learning approaches. The comparative analysis of experimental results on current semi-supervised GAN optimizations is performed to provide a reference for further research.

As one of the earliest high-level programming languages, Fortran with easy accessibility and computational efficiency is widely used in the engineering field. The purpose of this paper is to present a Fortran implementation of isogeometric analysis (IGA) for thin plate problems.

IGA based on non-uniform rational B-splines (NURBS) offers exact geometries and is more accurate than finite element analysis (FEA). Unlike the basis functions in FEA, NURBS basis functions are non-interpolated. Hence, the penalty method is used to enforce boundary conditions.

Several thin plate examples based on the Kirchhoff-Love theory were illustrated to demonstrate the accuracy of the implementation in contrast with analytical solutions, and the efficiency was validated in comparison with another open method.

A Fortran implementation of NURBS-based IGA was developed to solve Kirchhoff-Love plate problems. It easily obtained high-continuity basis functions, which are necessary for Kirchhoff formulation. In comparison with theoretical solutions, the numerical examples demonstrated higher accuracy and faster convergence of the Fortran implementation. The Fortran implementation can well solve the time-consuming problem, and it was validated by the time-consumption comparison with the Matlab implementation. Due to the non-interpolation of NURBS, the penalty method was used to impose boundary conditions. A suggestion of the selection of penalty coefficients was given.

The purpose of this paper is to investigate whether audit opinions of listed firms in China vary systematically with the political connections of the firm’s chief executive officer (CEO). Prior literature only shows the importance of political influence to auditor choice and audit quality.

A politically connected firm is defined as a firm in which the CEO has a political background. The authors use a “difference-in-difference” model to control for self-selection problems.

The authors find that the likelihood of receiving a favourable opinion in the subsequent period is positively associated with a CEO’s political connections. This positive association is stronger with CEOs connected to local government within the same region. The authors further find that the CEO’s political connections have more influence on favourable audit opinions in non-state-owned enterprises (non-SOEs) in a less developed and lower investor protection region. The influence is also less significant in the regions where there are more non-state-owned or foreign banks and where there are greater penalties for political corruption and relationship-based contracting.

The study complements and extends the existing literature on the role of political connections in the economy by providing evidence on the effect of a CEO’s political connections on audit opinions. The authors extend the research on auditing in emerging markets by explicitly accounting for unique institutional and market factors in China. They explore audit quality by observing how audit opinions are directly shaped by political and institutional factors.

Research on grey systems is becoming more sophisticated, and grey relational and prediction analyses are receiving close review worldwide. Particularly, the application of grey systems in marine economics is gaining importance. The purpose of this paper is to summarize and review literature on grey models, providing new directions in their application in the marine economy.

This paper organized seminal studies on grey systems published by Chinese core journal database – CNKI, Web of Science and Elsevier from 1982 to 2018. After searching the aforementioned database for the said duration, the authors used the CiteSpace visualization tools to analyze them.

The authors sorted the studies according to their countries/regions, institutions, keywords and categories using the CiteSpace tool; analyzed current research characteristics on grey models; and discussed their possible applications in marine businesses, economy, scientific research and education, marine environment and disasters. Finally, the authors pointed out the development trend of grey models.

Although researches are combining grey theory with fractals, neural networks, fuzzy theory and other methods, the applications, in terms of scope, have still not met the demand. With the increasingly in-depth research in marine economics and management, international marine economic research has entered a new period of development. Grey theory will certainly attract scholars’ attention, and its role in marine economy and management will gain considerable significance.

The purpose of this paper is to clarify the influence of low earth orbit space environment on the wear mechanism of TC4 alloy material and crank rocker mechanism.

In this study, friction experiments were carried out on TC4 alloy friction discs and crank rocker mechanisms, both before and after exposure to atomic oxygen and proton irradiation. Nanoindentation, grazing incidence X-ray diffraction (GIXRD), and X-ray photoelectron spectroscopy were employed to systematically characterize alterations in mechanical properties, surface phase, and chemical composition.

The results show that the wear mechanism of TC4 alloy friction disc is mainly adhesive wear in vacuum environment, while the wear mechanism of crank rocker mechanism includes not only adhesive wear but also abrasive wear. Atomic oxygen exposure leads to the formation of more oxides on the surface of TC4 alloy, which form abrasive particles during the friction process. Proton irradiation will lead to a decrease in fatigue performance and an increase in hardness on the surface of TC4 alloy, thus causing fatigue wear on the surface of TC4 alloy, and more furrows appear on the crank rocker mechanism after proton irradiation. In the three environments, the characteristics of abrasive wear of the crank rocker mechanism are more obvious than those of the TC4 alloy friction disc.

These results highlight the importance of understanding the subtle effects of atomic oxygen and proton irradiation on the wear behavior of TC4 alloy and provide some insights for optimizing its performance in space applications.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-02-2024-0051/

Independent directors are important corporate decision participants and makers. Based on the Chinese cultural background, this paper interprets the listing order of independent directors as independent directors’ status, exploring their influence on the corporate research and development (R&D) behavior.

This paper studies A-share listed firms in China from 2008 to 2018 as the sample. The main method is ordinary least square (OLS) regression. We also use other methods to deal with endogenous problems, such as the firm fixed effect method, change model method, two-stage instrumental variable method, and Heckman two-stage method.

(1) Higher independent directors’ status attribute to more effective exertion of supervision and consultation function, and positively enhance the corporate R&D investment. The increase of the independent director’ status by one standard deviation will increase the R&D investment by 4.6%. (2) The above effect is more influential in firms with stronger traditional culture atmosphere, higher information opacity and higher performance volatility. (3) High-status independent directors promote R&D investment by improving the scientificity of R&D evaluation and reducing information asymmetry. (4) The enhancing effect of independent director’ status on R&D investment is positively associated with the firm’s patent output and market value.

This paper contributes to understanding the relationship between the independent directors’ status and their duty execution from an embedded cultural background perspective. The findings of the study enlighten the improvement of corporate governance efficiency and the healthy development of the capital market.