Search results

Fresh fruits and vegetables (FV) are crucial global food resources, but the presence of heat loads during harvest adversely impacts their shelf life. While freezing technology provides an effective means of removing heat loads, it is an energy-intensive process and may consequently prove too costly for practical business viability. The growing interest in utilizing magnetic field (MF) technology during the freezing of fresh FV enhances the freezing rate and rapidly removes the heat loads of products.

In the present study, pulsed magnetic field (PMF) pretreatment employing specific field strengths (9 T, 14 T and 20 T) was examined as a preliminary step before freezing mango and tomato and compared to the conventional freezing method (untreated) at − 18 °C.

PMF pretreatment prior to freezing demonstrated a noteworthy enhancement in freezing rate by around 10 and 12% when compared with the conventional (untreated) freezing, which exhibited freezing rates of −0.08 °C/min and −1.10 °C/min for mango and tomato, respectively. The PMF pretreatment (at 20 T) provided a higher freezing rate (at p = 0.05) than the conventional freezing method reduced heat loads amounting to 1.1 × 107 J/kg oC and 2.9 × 106 J/kg oC, significantly (at p = 0.05) from mango and tomato, respectively. These reductions in heat loads were approximately more than 5% of the calculated heat loads removed during conventional freezing.

Mango and tomato samples were only tested; the results may lack generalizability. Therefore, researchers are encouraged to test for other products for further studies.

The paper includes implications for the development of a rapid freezing technique, the development of “pulsed magnetic field” and for eliminating the problem associated with conventional (slow) freezing.

The study holds significance for the production of postharvest freezing technology, providing insightful information on the PMF-assisted freezing of cellular foods.

Adaptability and integration (ADI) are the core ingredients for environmentally sustainable construction (ESC), which preserves the ecology from unsupported human activities. However, the approach is lagging in developing countries, which has led to studying the influence of ADI on the adaptive capacity of small- and medium-scale construction organisations.

The research employed a quantitative methodology, collecting 400 responses as a sample size. A construct of 14 influential factors concerning ADI within the Ghanaian small and medium-scale construction industry was developed. The data obtained from participants underwent analysis using SPSS version 26. The validity of the study’s findings was assessed by applying structural equation modelling (SEM) within the AMOS software.

It was evident that innovation advancement and ongoing training and evaluations significantly influence ADI for adaptive capacity. Moreover, the system internally and vulnerability (SIV) and perceived need for implementation (PNI) sub-scales were the main latent components for best construction practices.

Ghana’s small- and medium-scale construction organisations have yet to fully recognise the importance of ADI in enhancing adaptive capacity for the best ESC. However, the results indicated that ADI constructs will significantly influence implementation outcomes to ensure ESC.

The originality of this research also resides in identifying how ADI affect small- and medium-scale construction organisation’s ability to ensure ecologically sustainable building practices.

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

The purpose of this paper is to investigate the impact of entrepreneurial orientation and total quality management on quality performance of pharmaceutical manufacturers in Pakistan. It also investigates the mediating role played by total quality management in the EO-QP relationship.

A structured questionnaire was used to collect data from 115 pharmaceutical manufacturers in Pakistan. Partial least squares structural equation modeling was used to analyze data.

The results show entrepreneurial orientation that and total quality management positively and significantly affect quality performance. Moreover, the effect of entrepreneurial orientation on quality performance is partially mediated by total quality management.

The study uses cross-sectional data. Therefore, the long-term effect of entrepreneurial orientation and total quality management on quality performance could not be determined. Moreover, quality performance has been measured based on perceptual data, which may be prone to biases, entrepreneurial orientation (EO), quality performance (QP), total quality management (TQM).

The study is unique in providing empirical evidence linking entrepreneurial orientation with quality performance through the mediating role of total quality management. Quality performance is vital in the pharmaceutical industry; thus, the study makes a valuable contribution by identifying a new mechanism to achieve it. Moreover, although both entrepreneurial orientation and total quality management are very important, only a few studies have so far investigated their interrelationship. By providing evidence from a new cultural and industrial context, the study makes a valuable contribution to an under-researched yet important area.

Output from the Irish Dairy Industry has grown rapidly since the abolition of quotas in 2015, with processors investing heavily in capacity expansion to deal with the extra milk volumes. Further capacity gains may be achieved by extending the processing season into the winter, a key enabler for which being the reduction of duration of the winter maintenance overhaul period. This paper aims to investigate if Lean Six Sigma tools and techniques can be used to enhance operational maintenance performance, thereby releasing additional processing capacity.

Combining the Six-Sigma Define, Measure, Analyse, Improve, Control (DMAIC) methodology and the structured approach of Turnaround Maintenance (TAM) widely used in process industries creates a novel hybrid model that promises substantial improvement in maintenance overhaul execution. This paper presents a case study applying the DMAIC/TAM model to Ireland’s largest dairy processing site to optimise the annual maintenance shutdown. The objective was to deliver a 30% reduction in the duration of the overhaul, enabling an extension of the processing season.

Application of the DMAIC/TAM hybrid resulted in process enhancements, employee engagement and a clear roadmap for the operations team. Project goals were delivered, and original objectives exceeded, resulting in €8.9m additional value to the business and a reduction of 36% in the duration of the overhaul.

The results demonstrate that the model provides a structure that promotes systematic working and a continuous improvement focus that can have substantial benefits for wider industry. Opportunities for further model refinement were identified and will enhance performance in subsequent overhauls.

To the best of the authors’ knowledge, this is the first time that the structure and tools of DMAIC and TAM have been combined into a hybrid methodology and applied in an Irish industrial setting.

From 1979 to 2023, the takaful structure has been adopted in many jurisdictions, making the documenting of its early days of establishment relatively difficult and somewhat unreliable. This is unlike conventional insurance, where the history and legislation are well documented and archived in various research (Hellwege, 2016; Marano and Siri, 2017). The purpose of this paper is to provide a chronology for the establishment and development of takaful via the takaful establishment in each jurisdiction, documenting its first takaful operator and first takaful regulation.

This paper has used a qualitative method in the form of reviewing literature and available data such as journals, books and official resources. The data is thoroughly analysed in order to build the chronology for takaful. It adopted an exploratory research design, which is deemed suitable in situations where few works of literature have examined the subject (Neuman, 2014). The paper explores the establishment and non-establishment of takaful in 57 countries. The paper categorises the countries into seven regions starting with the GCC, Levant, Asia, Central Asia, Africa, Europe and Others.

The takaful chronology presented in this paper shows that takaful operations exist in 47 jurisdictions, starting from Sudan and the UAE in 1979, with the most recent adopters being Morocco and Iran in December 2021. It is found that 22 jurisdictions do not have takaful regulations, and the Takaful Act 1984, issued in Malaysia, is considered the first takaful regulation that sets the basis for other regulations that follow.

The paper contributes to the literature by providing a comprehensive chronology of takaful, especially as the few existing timelines have been found to be incomplete and consist of contradictory information.