Search results

Aluminum foam-filled thin-walled unit structures have received much attention for their excellent energy absorption properties. To improve the energy absorption effect of car energy absorption box under axial compression, this paper optimizes the fiber lay-up sequence, fiber angle and aluminum foam density of aluminum foam filled carbon fiber reinforced plastic (CFRP) thin-walled square tubes.

Design of sample points required to construct the proxy model using design of experiments (DOE) method, and the data sample points of different models are obtained through Abaqus simulation and test. A double high-precision proxy model with the maximum specific energy absorption (SEA) and the minimum initial peak crash force (PCF) as the evaluation index is constructed based on the response surface function method. The NSGA-II multi-objective genetic algorithm was used to optimize the design parameters and obtain the optimal solution for the Pareto front, and the results were verified by using the multi-objective optimization toolbox in design-expert.

The results show that the optimal solution to the multi-objective optimization problem with the inclusion of the lay-up sequence is ρ = 0.5g/cm3 for a fiber lay-up angle varying in the range ±15–90° and an aluminum foam density varying in the range 0.2g/cm3-0.5g/cm3, with a lay-up method of [±87°/±16°/±15°/±89°]. The two optimization methods correspond to SEA and PCF errors of 2.109% and 4.1828%, respectively. The optimized SEA value is 18.2 J/g and the PCF value is 18,230 N. The optimized design reduces the peak impact force and increases the specific energy absorption, which improves the energy absorption effect of thin-walled energy-absorbing boxes for automobiles.

In this paper, the impact resistance of CFRP thin-walled square tubes filled with aluminum foam is optimized. Based on numerical simulations and experiments to obtain the sample point data for constructing the dual-agent model, we investigate the effect of filling with different densities of aluminum foam under the simultaneous change of fiber lay-up angle and order on its mechanical properties in this process, and carry out the multi-objective optimization design with NSGA-II algorithm.

Fine-tuning pre-trained language models (PLMs), e.g. SciBERT, generally require large numbers of annotated data to achieve state-of-the-art performance on a range of NLP tasks in the scientific domain. However, obtaining fine-tuning data for scientific NLP tasks is still challenging and expensive. In this paper, the authors propose the mix prompt tuning (MPT), which is a semi-supervised method aiming to alleviate the dependence on annotated data and improve the performance of multi-granularity academic function recognition tasks.

Specifically, the proposed method provides multi-perspective representations by combining manually designed prompt templates with automatically learned continuous prompt templates to help the given academic function recognition task take full advantage of knowledge in PLMs. Based on these prompt templates and the fine-tuned PLM, a large number of pseudo labels are assigned to the unlabelled examples. Finally, the authors further fine-tune the PLM using the pseudo training set. The authors evaluate the method on three academic function recognition tasks of different granularity including the citation function, the abstract sentence function and the keyword function, with data sets from the computer science domain and the biomedical domain.

Extensive experiments demonstrate the effectiveness of the method and statistically significant improvements against strong baselines. In particular, it achieves an average increase of 5% in Macro-F1 score compared with fine-tuning, and 6% in Macro-F1 score compared with other semi-supervised methods under low-resource settings.

In addition, MPT is a general method that can be easily applied to other low-resource scientific classification tasks.

The purpose of this study was to examine the relationship between environmental pressure, green logistics strategy (GLS) and sustainability performance as well as the moderating role of competitive intensity in the relationship between environmental pressure and GLS in the context of the Ghanaian Manufacturing firms.

The study included a thorough review of the literature and an empirical questionnaire-based data collection with responses from 220 participant manufacturing firms in Ghana. The data collected was statistically analysed using the PLS-SEM software.

The findings of the study indicated that environmental pressure positively influences the implementation of GLS. Again, it was revealed that there is a significant relationship between GLS and sustainability performance. Likewise, the study also found that environmental pressure significantly influences sustainability performance. Also, competitive intensity was found to moderate the relationship between environmental pressure and GLS.

This study gives insight into GLS and sustainability performance and also suggested that when managers in manufacturing industries adopt green practices as a result of environmental pressure, sustainability performance will be achieved. The geographic scope of the study area and time constraints were some of the research's limitations.

Although there have been studies carried out on the subject of green logistics, this study is the first of its kind to examine the relationship between environmental pressure, GLS and sustainability performance within the context of developing economies such as Ghana. Also, this study shows how intense competition in the market can moderate the adoption of GLS.

This study aims to enhance the effectiveness of knowledge markets and overall knowledge management (KM) practices within organisations. By addressing the challenge of internal knowledge stickiness, it seeks to demonstrate how machine learning and AI approaches, specifically a text-based AI method for personality assessment and regression trees for behavioural analysis, can automate and personalise knowledge market incentivisation mechanisms.

The research employs a novel approach by integrating machine learning methodologies to overcome the limitations of traditional statistical methods. A natural language processing (NLP)-based AI tool is used to assess employees’ personalities, and regression tree analysis is applied to predict and categorise behavioural patterns in knowledge-sharing contexts. This approach is designed to capture the complex interplay between individual personality traits and environmental factors, which traditional methods often fail to adequately address.

Cognitive style was confirmed as a key predictor of knowledge-sharing, with extrinsic motivators outweighing intrinsic ones in market-based platforms. These findings underscore the significance of diverse combinations of environmental and individual factors in promoting knowledge sharing, offering key insights that can inform the automatic design of personalised interventions for community managers of such platforms.

This research stands out as it is the first to empirically explore the interaction between the individual and the environment in shaping actual knowledge-sharing behaviours, using advanced methodologies. The increased automation in the process extends the practical contribution of this study, enabling a more efficient, automated assessment process, and thus making critical theoretical and practical advancements in understanding and enhancing knowledge-sharing behaviours.

In the era of the digital economy, higher demands are placed on versatile talents, and the cultivation of students with innovative and entrepreneurial abilities has become an important issue for the further development of higher education, thus leading to extensive and in-depth research by many scholars. The study summarizes the characteristics and patterns of dual-innovation education at different stages of development, hoping to provide a systematic model for the development of dual-innovation education in China and make up for the shortcomings.

This paper uses Citespace software to visualize and analyze the relevant literature in CNKI and Web of Science databases from a bibliometric perspective, focusing on quantitative analysis in terms of article trends, topic clustering, keyword co-linear networks and topic time evolution, etc., to summarize and sort out the development of innovation and entrepreneurship education research at home and abroad.

The study found that the external characteristics of the literature published in the field of bi-innovation education in China and abroad are slightly different, mainly in that foreign publishers are more closely connected and have formed a more stable ecosystem. In terms of research hotspots, China is still in a critical period of reforming its curriculum and teaching model, and research on the integration of specialization and creative education is in full swing, while foreign countries focus more on the cultivation of students' entrepreneurial awareness and the enhancement of individual effectiveness. In terms of cutting-edge analysis, the main research directions in China are “creative education”, “new engineering”, “integration of industry and education” and “rural revitalization”.

Innovation and entrepreneurship education in China is still in its infancy, and most of the studies lack an overall overview and comparison of foreign studies. Based on the econometric analysis of domestic and foreign literature, this paper proposes a path for domestic innovation and entrepreneurship education reform that can make China's future education reform more effective.

To address the shortcomings of the traditional back propagation (BP) neural network agent model, such as insufficient fitting accuracy and low computational efficiency, an improved method is proposed.

In this study, an improved sparrow search algorithm (ISSA) is developed to optimize the reliability calculation of the BP neural network (ISSA-BP) using an enhanced BP neural network model. The traditional sparrow search algorithm is enhanced by incorporating a golden sine strategy to improve its position-updating mechanism, thereby overcoming its tendency to converge prematurely to local optima. Additionally, an opposition-based learning strategy is integrated to explore the reverse solution around the optimal solution of the sparrow search algorithm, mitigating the risk of local optima.

The results of the test function demonstrate that the proposed method significantly enhances fitting accuracy while maintaining computational efficiency. Finally, by applying this approach to the metro bogie frame as a case study, the structural reliability of the bogie frame is evaluated using the Monte Carlo method, providing valuable insights for subsequent analysis and structural optimization.

The use of the surrogate model approach for structural reliability analysis significantly improves solution efficiency. Furthermore, the integration of ISSA with the BP neural network enhances both fitting accuracy and computational efficiency, demonstrating the superiority and practicality of the proposed method.

Organic coatings are widely used for protecting metal equipment and structures from corrosion. Accurate detection and evaluation of the protective performance and service life of coatings are of great importance. This paper aims to review the research progress on performance evaluation and lifetime prediction of organic coatings.

First, the failure forms and aging testing methods of organic coatings are briefly introduced. Then, the technical status and the progress in the detection and evaluation of coating protective performance and the prediction of service life are mainly reviewed.

There are some key challenges and difficulties in this field, which are described in the end.

The progress is summarized from a variety of technical perspectives. Performance evaluation and lifetime prediction include both single-parameter and multi-parameter methods.

We empirically investigate the impact of fintech innovation on dividend payout (DP) decisions. In addition, we also examine the mediated and moderated role of intellectual capital (IC) and board characteristics (BC) respectively in the fintech innovation-DP relationship.

Using a sample of 9,441 firm-year observations over the period 2014–2022, we develop a structural model that encompasses fintech innovation, IC, BC and DP decisions. We utilize fixed effects regression to empirically test the model. A battery of tests such as the two-step Generalized Method of Moment, Heckman’s two-stage selection correction and Difference-in-Difference regression are used to check the robustness and sensitivity of the estimates.

Our results suggest that fintech innovation significantly and positively impacts DP decisions and IC partially mediates the fintech innovation–DP relationship. In addition, BC such as independence, age and gender diversity are found to moderate this relationship.

This study’s originality lies in its micro-level analysis of the impact of fintech innovation on DP decisions, considering a novel firm-level innovation metric derived from patent applications. To our knowledge, no previous work has empirically examined the mediating role of IC and the moderating influence of BC in the fintech innovation–DP relationship, offering a unique perspective on the complex interactions shaping dividend policies in the digital era.

In many instances, the data exhibits periodic and trend characteristics. However, indices like the Digital Economy Development Index (DEDI), which pertains to science, technology, policy and economy, may occasionally display erratic behaviors due to external influences. Thus, to address the unique attributes of the digital economy, this study integrates the principle of information prioritization with nonlinear processing techniques to accurately forecast rapid and anomalous data.

The proposed method utilizes the new information priority GM(1,1) model alongside an optimized BP neural network model achieved through the gradient descent technique (GD-BP). Initially, the provincial Digital Economic Development Index (DEDI) is derived using the entropy weight approach. Subsequently, the original GM(1,1) time response equation undergoes alteration of the initial value, and the time parameter is fine-tuned using Particle Swarm Optimization (PSO). Next, the GD-BP model addresses the residual error. Ultimately, the prediction outcome of the grey combination forecasting model (GCFM) is derived by merging the findings from both the NIPGM(1,1) model and the GD-BP approach.

Using the DEDI of Jiangsu Province as a case study, researchers demonstrate the effectiveness of the grey combination forecasting model. This model achieves a mean absolute percentage error of 0.33%, outperforming other forecasting methods.

First of all, due to the limited data access, it is impossible to obtain a more comprehensive dataset related to the DEDI of Jiangsu Province. Secondly, according to the test results of the GCFM from 2011 to 2020 and the forecasting results from 2021 to 2023, it can be seen that the results of the GCFM are consistent with the actual development situation, but it cannot guarantee the correctness of the long-term forecasting, so the combination forecasting model is only suitable for short-term forecasting.

This article proposes a grey combination prediction model based on the principles of new information priority and nonlinear processing.

The purpose of this study is to find out the relationship between the corporate social responsibility (CSR) and green performance (GP) of Pakistani manufacturing SMEs. This study further explores the mediating roles of green human resource management (GHRM) and green innovation (GI) in the relationship between CSR and GP.

A survey method was used to collect data from manufacturing SMEs. Data were collected from 366 respondents working in higher positions and playing a decisive role in the organization. The collected data were analysed by applying structural equation modelling with the help of smart PLS.

The study shows that CSR (customers, society, employees) helps significantly improve a firm's GP. Furthermore, this study explores how GI (process, product) and GHRM (skills development, motivation and involvement) mediate the relationship between CSR and GP.

This study is limited to manufacturing SMEs and a single developing country, Pakistan. However, this study will significantly contribute to the existing literature on GP and help manufacturing firms’ top management take steps to minimize carbon emissions and improve GP. Furthermore, this study will also provide valuable insights to government agencies in the Asian context to adjust their policies regarding the manufacturing sector to reduce pollution in the country.

As a pioneering study encompassing CSR, GHRM, GI and GP under one research paradigm in an emerging economy environment, the current research provides substantial additions to the literature on the impact of CSR on GP.