Search results

This paper aims to explore the influence of corrosion-deformation interactions (CDI) on the corrosion behavior and mechanisms of 316LN under applied tensile stresses.

Corrosion of metals would be aggravated by CDI under applied stress. Notably, the presence of nitrogen in 316LN austenitic stainless steel (SS) would enhance the corrosion resistance compared to the nitrogen-absent 316L SS. To clarify the CDI behaviors, electrochemical corrosion experiments were performed on 316LN specimens under different applied stress levels. Complementary analyses, including three-dimensional morphological examinations by KH-7700 digital microscope and scanning electron microscopy coupled with energy dispersive spectroscopy, were conducted to investigate the macroscopic and microscopic corrosion morphology and to characterize the composition of corrosion products within pits. Furthermore, ion chromatography was used to analyze the solution composition variations after immersion corrosion tests of 316LN in a 6 wt.% FeCl₃ solution compared to original FeCl₃ solution. Electrochemical experiment results revealed the linear decrease in free corrosion potential with increasing applied stress. Electrochemical impedance spectroscopy results indicated that high tensile stress level damaged the integrity of passivation film, as evidenced by the remarkable reduction in electrochemical impedance. Ion chromatography analyses proved the concentrations increase of NO₃⁻ and NH₄⁺ ion concentrations in the corrosion media after corrosion tests.

The enhanced corrosion resistance of 316LN SS is attributable to the presence of nitrogen.

The scope of this study is confined to the influence of tensile stress on the electrochemical corrosion of 316LN at ambient temperatures; it does not encompass the potential effects of elevated temperatures or compressive stress.

The resistance to stress electrochemical corrosion in SS may be enhanced through nitrogen alloying.

This paper presents a systematic investigation into the stress electrochemical corrosion of 316LN, marking the inaugural study of its impact on corrosion behaviors and underlying mechanisms.

This study aims to prepare thymol-based deep eutectic solvents (DESs) and use them as lubricates for friction and wear tests to simulate the wear conditions of hybrid bearings.

Through the characterization and analysis of the morphology of wear scars and the elemental composition of friction films, the tribological behavior and wear mechanism of sample materials as lubricants were investigated and the anti-wear mechanism of thymol-based DESs was discussed.

The findings demonstrate that because of the formation of a fluid lubrication film and excellent kinematic viscosity, the lubrication effect of the prepared DES is improved by about 50% compared to the base lubricating oil. The prepared [Ch]Cl-thymol DES has a better anti-friction and lubrication effect than citric-thymol, EG-thymol and urea-thymol DESs, with an average friction coefficient of about 0.04.

In this work, the friction reduction properties of thymol-based DESs were studied as lubricants for the first time, and the lubrication mechanism of sample materials was investigated.

The purpose of this article is to prepare graphene/polyimide composite materials for use as bearing cage materials, improving the friction and wear performance of bearing cages.

The oil absorption and discharge tests were conducted to evaluate the oil content properties of the materials, while the mechanical properties were analyzed through cross-sectional morphology examination. Investigation into the tribological behavior and wear mechanisms encompassed characterization and analysis of wear trace morphology in PPI-based materials. Consequently, the influence of varied graphene nanoplatelets (GN) concentrations on the oil content, mechanical and tribological properties of PPI-based materials was elucidated.

The composites exhibit excellent oil-containing properties due to the increased porosity of PPI-GN composites. The robust formation of covalent bonds between GN and PPI amplifies the adhesive potency of the PPI-GN composites, thereby inducing a substantial enhancement in impact strength. Notably, the PPI-GN composites showed enhanced lubrication properties compared to PPI, which was particularly evident at a GN content of 0.5 Wt.%, as evidenced by the minimization of the average coefficient of friction and the width of the abrasion marks.

This paper includes implications for elucidating the wear mechanism of the polyimide composites under frictional wear conditions and then to guide the optimization of oil content and tribological properties of polyimide bearing cage materials.

In this paper, homogeneously dispersed PPI-GN composites were effectively synthesized by introducing GN into a polyimide matrix through in situ polymerization, and the lubrication mechanism of the PPI composites was compared with that of the PPI-GN composites to illustrate the composites’ superiority.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2023-0415

Capable service employees are increasingly scarce and costly. Many organizations opt to partially replace, support or augment human employees with AI systems. This study builds a framework to help managers map and understand the challenges of crafting a service climate that fosters synergies between AI and human employees, where customers require value-added, personalized and excellent service.

This conceptual article identifies barriers and facilitators of building a service climate for organizations using both human and AI-based employees through an eclectic review of relevant literature.

A conceptual framework is built, and a future research agenda is brought forth.

By identifying barriers and facilitators for AI–human synergies in service settings, this article clarifies how AI can be made to complement human employees, especially in delivering personalized, value-added services, while also highlighting knowledge gaps.

This study provides a practical framework for integrating AI into the workforce. It offers insights into addressing challenges in creating a service climate that combines human and AI capabilities to maintain service excellence. Identifying key barriers and facilitators, the framework guides managers to improve efficiency and customer satisfaction in a rapidly changing service landscape.

This research offers insights on incorporating AI to address labor shortages while maintaining high-quality, personalized service. It provides a pathway to improving service experiences, especially in sectors facing staffing challenges from an aging population.

This research builds on Bowen and Schneider’s (2014) seminal service climate framework to account for a mix of human and AI-based employees.

Under the high-speed operating conditions, the effects of wheelset elastic deformation on the wheel rail dynamic forces will become more notable compared to the low-speed condition. In order to meet different analysis requirements and selecting appropriate models to analyzing the wheel rail interaction, it is crucial to understand the influence of wheelset flexibility on the wheel-rail dynamics under different speeds and track excitations condition.

The wheel rail contact points solving method and vehicle dynamics equations considering wheelset flexibility in the trajectory body coordinate system were investigated in this paper. As for the wheel-rail contact forces, which is a particular force element in vehicle multibody system, a method for calculating the Jacobian matrix of the wheel-rail contact force is proposed to better couple the wheel-rail contact force calculation with the vehicle dynamics response calculation. Based on the flexible wheelset modeling approach in this paper, two vehicle dynamic models considering the wheelset as both elastic and rigid bodies are established, two kinds of track excitations, namely normal measured track irregularities and short-wave irregularities are used, wheel-rail geometric contact characteristic and wheel-rail contact forces in both time and frequency domains are compared with the two models in order to study the influence of flexible wheelset rotation effect on wheel rail contact force.

Under normal track irregularity excitations, the amplitudes of vertical, longitudinal and lateral forces computed by the flexible wheelset model are smaller than those of the rigid wheelset model, and the virtual penetration and equivalent contact patch are also slightly smaller. For the flexible wheelset model, the wheel rail longitudinal and lateral creepages will also decrease. The higher the vehicle speed, the larger the differences in wheel-rail forces computed by the flexible and rigid wheelset model. Under track short-wave irregularity excitations, the vertical force amplitude computed by the flexible wheelset is also smaller than that of the rigid wheelset. However, unlike the excitation case of measured track irregularity, under short-wave excitations, for the speed within the range of 200 to 350 km/h, the difference in the amplitude of the vertical force between the flexible and rigid wheelset models gradually decreases as the speed increase. This is partly due to the contribution of wheelset’s elastic vibration under short-wave excitations. For low-frequency wheel-rail force analysis problems at speeds of 350 km/h and above, as well as high-frequency wheel-rail interaction analysis problems under various speed conditions, the flexible wheelset model will give results agrees better with the reality.

This study provides reference for the modeling method of the flexible wheelset and the coupling method of wheel-rail contact force to the vehicle multibody dynamics system. Furthermore, by comparative research, the influence of wheelset flexibility and rotation on wheel-rail dynamic behavior are obtained, which is useful to the application scope of rigid and flexible wheelset models.

This paper believes that while implementing the gradual delay retirement age policy in China, the impact should be considered comprehensively; we should pay attention to impacts brought by the delayed retirement policy and introduce policies to deal with the impacts in a timely manner.

This paper aims to explore the delayed retirement’s impact on women’s labor supply and to clarify the elderly care’s role in it.

The results found that the delayed retirement has a positive effect on the women’s overall and young women’s labor supply, with a more significant promotion for young women’s labor supply. The mediation results suggest that delayed retirement promotes women’s labor supply by affecting elderly care. Therefore, we believe that while implementing the gradual delay retirement policy in China, it is important to implement it on the correct estimation basis so as to reduce the volatility in the labor market.

This paper may produce marginal contributions in the following two aspects: From the research perspective, we construct a model containing delayed retirement, elderly care and women’s labor supply and illustrate how the delayed retirement promotes women’s labor supply by affecting elderly care. Secondly, from the research content, this paper expands the delayed retirement on macro-employment and further explores the micro-impact on employment.

Advances in material agency driven by artificial intelligence (AI) have facilitated breakthroughs in material adaptivity enabling smart objects to autonomously provide individualized smart services, which makes smart objects act as social actors embedded in the real world. However, little is known about how material adaptivity fosters the infusion use of smart objects to maximize the value of smart services in customers' lives. This study examines the underlying mechanism of material adaptivity (task and social adaptivity) on AI infusion use, drawing on the theoretical lens of social embeddedness.

This study adopted partial least squares structural equation modeling (PLS-SEM), mediating tests, path comparison tests and polynomial modeling to analyze the proposed research model and hypotheses.

The results supported the proposed research model and hypotheses, except for the hypothesis of the comparative effects on infusion use. Besides, the results of mediating tests suggested the different roles of social embeddedness in the impacts of task and social adaptivity on infusion use. The post hoc analysis based on polynomial modeling provided a possible explanation for the unsupported hypothesis, suggesting the nonlinear differences in the underlying influencing mechanisms of instrumental and relational embeddedness on infusion use.

The formation mechanisms of AI infusion use based on material adaptivity and social embeddedness help to develop the business strategies that enable smart objects as social actors to exert a key role in users' daily lives, in turn realizing the social and economic value of AI.

This study advances the theoretical research on material adaptivity, updates the information system (IS) research on infusion use and identifies the bridging role of social embeddedness of smart objects as agentic social actors in the AI context.

This study aims to analyze the capabilities and external conditions of womenpreneur owners of micro, small and medium enterprises (MSMEs) Fashion EcoPrint Indonesia in green business practices and their implications for sustainable business performance.

This study chooses a quantitative approach with a sustainable business internal-external capability model. Using the structural equation modeling-partial least square analysis tool, the analysis was conducted on a sample of womenpreneurs who owned MSMEs EcoPrint Indonesia (n = 493).

In the internal capability dimension, total quality environment and green core competence affect green supply chain management, affecting green product innovation performance. Meanwhile, women entrepreneurs’ external capability dimensions (regulation, customer awareness of the environment and technological innovation infrastructure) are connected to sustainable development business capabilities, which affect the performance of green process innovation. The study confirms that green products and processes have the potential to influence sustainable business performance. A key finding is the strong influence of environment-based total quality management governance on both sides. At the same time, womenpreneurs have a significant impact on their respective dimensions.

This study has implications for increasing competency, Sustainable MSME industrial infrastructure, and protecting women in developing countries. The theoretical implications of creating a model that examines the impact of womenpreneurs’ internal and external abilities on eco-friendly businesses’ success are significant for developing nations’ promising growth.

This study explores women’s contributions to family well-being and environment-based economies, focusing on eco-friendly supply chain management and sustainable external capabilities of women entrepreneurs in Indonesia, using a gender equality approach in developing economies.

This study aims to compare and analyze the impact of the commonly used takeout packing (Kraft paper bowl and plastic bowl) through life cycle assessment, then certain suggestions for the development of green packaging could be provided.

In this study, Simapro software was used to calculate and analyze the whole life cycle of takeout packaging from the stage of raw materials, production and processing and waste disposal.

Twelve environmental categories were used to quantitatively analyze the environmental impact of the two different bowls. The results showed that the impact of Kraft paper bowl on the environment was less than that of plastic bowl, regardless of raw material, processing or waste stage. Kraft paper bowl was better than plastic bowl.

This study compared and analyzed the progress of 750-mL bowls made with different materials and specific specifications.

Green packaging is the development trend of the future packaging and follows the principle of reduce, resue, recycle, degradable. According to the calculation results, corresponding suggestions can be put forward from production, processing, use, waste and other aspects, and make corresponding contributions to the development of green packaging.

The contribution and impact of each stage of the product on the environment can be studied. The environmental impacts, such as global warming potential and water scarcity, can be reduced through different solutions, such as the use of green materials, good processing techniques and higher recycling rates.

The purpose of this study is to examine the impact of cross-ownership on corporate digital innovation and their specific mechanisms. Cross-ownership, who hold equity in two or more companies simultaneously, have two different types of governance effects in the capital market: governance synergistic effects and competitive collusion effects.

This paper uses a panel model, selecting A-share company data from 2011 to 2021 in China. In total, 23,853 valid data were obtained, which came from the CSMAR database and Wind database. For some missing data, they were manually supplemented by consulting the company's annual report and Sina Finance. Data processing was conducted using EXCEL and Stata16.0 software.

The results show that cross-ownership promote corporate digital innovation by leveraging governance synergies. Further grouping tests show that the synergistic effects of cross-ownership are significant in non-state-owned, high-tech, weakly competitive and higher analyst attention enterprises. Mechanism testing shows that cross-ownership can empower corporate digital innovation in three ways: reducing information asymmetry, alleviating financing constraints and improving corporate governance.

The conclusion of this paper provides new empirical evidence for a comprehensive understanding of the role of cross-ownership in corporate development, enriches the economic consequences research of chain institutional investors in China and broadens the research perspective of corporate digital innovation. It also provides important references for the digital transformation of enterprises and the healthy development of the capital market.