Search results

The use of additive manufacturing in many branches of industry is increasing significantly because of its many advantages, such as being able to produce complex parts that cannot be produced by classical methods, using fewer materials, easing the supply chain with on-site production, being able to produce with all kinds of materials and producing lighter parts. The binder jetting technique, one of the additive manufacturing methods researched within the scope of this work, is predicted to be the additive manufacturing method that will grow the most in the next decade, according to many economic reports. Although additive manufacturing methods have many advantages, they can be slower than classical manufacturing methods regarding production speed. For this reason, this study aims to increase the manufacturing speed in the binder jetting method.

Adaptive slicing and variable binder amount algorithm (VBAA) were used to increase manufacturing speed in binder jetting. Taguchi method was used to optimize the layer thickness and saturation ratio in VBAA. According to the Taguchi experimental design, 27 samples were produced in nine different conditions, three replicates each. The width of the samples in their raw form was measured. Afterward, the samples were sintered at 1,500 °C for 2 h. After sintering, surface roughness and density tests were performed. Therefore, the methods used have been proven to be successful. In addition, measurement possibilities with image processing were investigated to make surface roughness measurements more accessible and more economical.

As a result of the tests, the optimum printing condition was decided to be 180–250 µm for layer thickness and 50% for saturation. A separate test sample was then designed to implement adaptive slicing. This test sample was produced in three pieces: adaptive (180–250 µm), thin layer (180 µm) and thick layer (250 µm) with the determined parameters. The roughness values of the adaptive sliced sample and the thin layer sample were similar and better than the thick layer sample. A similar result was obtained using 12.31% fewer layers in the adaptive sample than in the thin layer sample.

The use of adaptive slicing in binder jetting has become more efficient. In this way, it will increase the use of adaptive slicing in binder jetting. In addition, a cheap and straightforward image processing method has been developed to calculate the surface roughness of the parts.

This case study is designed to enable students to understand the reasons behind the launch of a beauty brand grounded on traditions and culture, understand the strategies adopted by Florasis to establish its presence in the C-beauty space and emerge successful, analyze the positioning of a C-beauty brand in a highly competitive beauty market, identify the issues and challenges faced by a C-beauty brand in its efforts to disrupt the C-beauty space and suggest strategies that Florasis can adopt to emerge as a market leader in the global beauty industry.

Set in 2021, the case study discusses about the emerging C-beauty brand Florasis innovative strategies to promote the brand. Florasis was founded in 2017 with a vision to become a century old national makeup brand of China. Florasis was successful in getting on board a story-telling experience that featured traditional Chinese culture, aesthetics and heritage. It sold cosmetic products with retro packaging, concepts derived from traditional Chinese style, promoting a sense of national pride and nostalgia. The case study highlights the innovative strategies Florasis adopted like influencer marketing through key opinion leaders and key opinion customers, celebrity endorsements, user co-creation programs, social content and network marketing, brand crossovers and collaborations, etc. In April 2021, Florasis became the No. 1 cosmetic company in China with a gross merchandise value of 218m yuan and further the total sales for second quarter of 2021 reached 830m yuan, endorsing its supremacy over other global and local beauty brands in China. However, with success came along a set of challenges. Some analysts pointed that the brand was slow in innovating its product line-up, it focused more on promotions and advertisements and the brand positioning with a single sales channel, the cost performance and quality of the products and excessive marketing campaigns targeting a niche segment. Going forward, what should Florasis do to conquer the global beauty space? Can Florasis aspire to become a digitally empowered global beauty brand? Has it got the momentum? Will its direct-to-consumer model and unprecedented marketing and promotion gimmicks, help it achieve the lead in the global beauty space?

This case study is suitable for students of the graduate and undergraduate programs in management.

Teaching notes are available for educators only.

CSS 8: Marketing.

This study aims to provide a new perspective and path to reduce the unsafe behavior of new generation of construction workers (NGCWs) in China. The purpose of this study is to explore the influencing mechanism of work-family balance on the unsafe behavior of NGCWs and test the mediating effect of job satisfaction and the moderating effect of group safety climate.

A theoretical model on the influencing mechanism of work-family balance on unsafe behavior of NGCWs was constructed through theoretical analysis. Research data were collected from 502 NGCWs via a questionnaire survey, and research hypotheses were testified with regression analysis.

The results show that work-family balance not only directly reduces NGCWs’ unsafe behavior but also indirectly reduces it through job satisfaction, which plays a partial mediating role. In addition to positively moderating the relationship between work-family balance and NGCWs’ unsafe behavior, group safety climate can also moderate the relationship between work-family balance and job satisfaction in a positive way.

This study provides practical implications for construction companies to reduce the unsafe behaviors of NGCWs from the perspective of work-family balance. Specifically, construction companies should adopt more flexible work rules, such as flexible organization and rotation systems, to increase their work autonomy. Meanwhile, construction companies need to improve the work environment and basic conditions for NGCWs, establish a reasonable salary system and provide attractive promotion opportunities to increase their job satisfaction. In addition, construction companies should provide active safety lectures and training, and supervisors should improve safety communication and interaction levels. Co-workers should remind workers about their safety attitudes and behaviors promptly. A good group safety climate will be created through the efforts of construction companies, supervisors and co-workers.

This study clarifies the influencing mechanism of work-family balance on the NGCWs’ unsafe behavior and further tests the partial mediating role of job satisfaction and the positively moderating effect of group safety climate on the influence relationship of work-family balance on job satisfaction and NGCWs’ unsafe behavior, which defines the boundary conditions of the relationship between work-family balance and NGCWs’ unsafe behavior, and promotes the effective integration of social exchange theory and theoretical system of influencing mechanism of construction workers’ unsafe behavior.

In order to explore a new estimation approach of hyperspectral estimation, this paper aims to establish a hyperspectral estimation model of soil organic matter content with the principal gradient grey information based on the grey information theory.

Firstly, the estimation factors are selected by transforming the spectral data. The eigenvalue matrix of the modelling samples is converted into grey information matrix by using the method of increasing information and taking large, and the principal gradient grey information of modelling samples is calculated by using the method of pro-information interpolation and straight-line interpolation, respectively, and the hyperspectral estimation model of soil organic matter content is established. Then, the positive and inverse grey relational degree are used to identify the principal gradient information quantity of the test samples corresponding to the known patterns, and the cubic polynomial method is used to optimize the principal gradient information quantity for improving estimation accuracy. Finally, the established model is used to estimate the soil organic matter content of Zhangqiu and Jiyang District of Jinan City, Shandong Province.

The results show that the model has the higher estimation accuracy, among the average relative error of 23 test samples is 5.7524%, and the determination coefficient is 0.9002. Compared with the commonly used methods such as multiple linear regression, support vector machine and BP neural network, the hyperspectral estimation accuracy of soil organic matter content is significantly improved. The application example shows that the estimation model proposed in this paper is feasible and effective.

The estimation model in this paper not only fully excavates and utilizes the internal grey information of known samples with “insufficient and incomplete information”, but also effectively overcomes the randomness and grey uncertainty in the spectral estimation. The research results not only enrich the grey system theory and methods, but also provide a new approach for hyperspectral estimation of soil properties such as soil organic matter content, water content and so on.

The paper succeeds in realizing both a new hyperspectral estimation model of soil organic matter content based on the principal gradient grey information and effectively dealing with the randomness and grey uncertainty in spectral estimation.

The ancient town of Lijiang is a representative place of ethnic minorities in China’s southwest border area jointly built by many ethnic groups. Its rich and diversified history, culture and architecture as well as its artistic and spiritual values need to be better retained and explored.

The protection and inheritance of Lijiang’s cultural heritage will be improved through the construction of digital memory resources. To guide Lijiang’s digital memory construction, this study explores strategies of digital memory construction by analyzing four case studies of well-known memory projects from China and America.

From the case studies analysis, factors of digital memory construction were identified and compared. Factors led to the discussion of strategies for constructing the digital memory of Lijiang within its design, construction and service phases.

The ancient town of Lijiang is a famous historical and cultural city in China, and it is also a representative place of ethnic minorities in the border area jointly built by many ethnic groups. The rich culture should be preserved and digitalized to offer better use for the whole nation.

This study aims to investigate the wetting behavior of AgCuTi and AgCu filler metals on selective laser melting (SLMed) Ti/TiB₂, and to analyze the microstructure and fracture characteristics of SLMed Ti/TiB₂/AgCuTi or AgCu alloy/SLMed Ti/TiB₂ brazed joints. The wetting behavior of AgCuTi and AgCu filler metals on the selective laser melted (SLMed) Ti/TiB₂ has been studied. The analysis of microstructures and fracture characteristics in vacuum-brazed SLMed Ti/TiB₂ substrate, using AgCuTi and AgCu filler metals, has been conducted to elucidate the influence of brazing temperature and alloy composition on the shear strength of the brazed joints.

Brazing SLMed-Ti/TiB₂ in a vacuum using AgCuTi and AgCu filler metals, this study aims to explore the optimal parameters for brazed joints at various brazing temperatures (800°C−950°C).

The findings suggest that elevated brazing temperatures lead to a more extensive diffusion region in the joint as a result of the partial melting of the filler metal. The joint composition changes from distinct Ti₂Cu layer/TiCu layer/filler metal to a-Ti (ss) + ß-Ti (ss)/TiCu. As the brazing temperature increases, the fracture mode shifts from brittle cleavage to ductile fracture, mainly attributed to a decrease in the CuTi within the brazed joint. This change in fracture behavior indicates an improvement in the ductility and toughness of the joint.

The originality of this study lies in the comprehensive analysis of the microstructure and shear strength of vacuum brazing SLMed Ti/TiB₂ using AgCuTi and AgCu filler metals.

Devices for step estimation are body-worn devices used to compute steps taken and/or distance covered by the user. Even though textiles or clothing are foremost to come to mind in terms of articles meant to be worn, their prominence among devices and systems meant for cadence is overshadowed by electronic products such as accelerometers, wristbands and smart phones. Athletes and sports enthusiasts using knee sleeves should be able to track their performances and monitor workout progress without the need to carry other devices with no direct sport utility, such as wristbands and wearable accelerometers. The purpose of this study thus is to contribute to the broad area of wearable devices for cadence application by developing a cheap but effective and efficient stride measurement system based on a knee sleeve.

A textile strain sensor is designed by weft knitting silver-plated nylon yarn together with nylon DTY and covered elastic yarn using a 1 × 1 rib structure. The area occupied by the silver-plated yarn within the structure served as the strain sensor. It worked such that, upon being subjected to stress, the electrical resistance of the sensor increases and in turn, is restored when the stress is removed. The strip with the sensor is knitted separately and subsequently sewn to the knee sleeve. The knee sleeve is then connected to a custom-made signal acquisition and processing system. A volunteer was employed for a wearer trial.

Experimental results establish that the number of strides taken by the wearer can easily be correlated to the knee flexion and extension cycles of the wearer. The number of peaks computed by the signal acquisition and processing system is therefore counted to represent stride per minute. Therefore, the sensor is able to effectively count the number of strides taken by the user per minute. The coefficient of variation of over-ground test results yielded 0.03%, and stair climbing also obtained 0.14%, an indication of very high sensor repeatability.

The study was conducted using limited number of volunteers for the wearer trials.

By embedding textile piezoresistive sensors in some specific garments and or accessories, physical activity such as gait and its related data can be effectively measured.

To the best of our knowledge, this is the first application of piezoresistive sensing in the knee sleeve for stride estimation. Also, this study establishes that it is possible to attach (sew) already-knit textile strain sensors to apparel to effectuate smart functionality.

This study aims to realize the multipurpose use of inorganic materials in adsorption treatment of pigment wastewater and preparation of core-modified Color Index Pigment Red 57:1 (C.I. Pigment Red 57:1, PR 57:1).

In this paper, the inorganic materials (sepiolite and SiO₂·nH₂O) were used in both PR 57:1 production wastewater treatment and its core-modification. The inorganic material firstly adsorbed 3-hydroxy-2-naphthoic acid (bon acid) in the pigment wastewater to reduce chemical oxygen demand. Then, the inorganic material adsorbed with bon acid was reused to prepare core-modified PR 57:1.

In the pigment wastewater adsorption experiment, it was found that under pH = 3, the adsorption percentage of bon acid by inorganic material can reached up to 46.00%. The pigment characterization results showed that the core-modified PR 57:1 had a core-shell structure. Under UV light irradiation for 1 h, the core-modified PR 57:1 prepared with sepiolite and SiO₂·nH₂O showed total color difference ΔE value of 1.43 and 2.05, respectively, which was lower than that of unmodified PR 57:1 (ΔE = 2.89). In addition, the transmittance of pigment water suspension test results showed that the core-modified PR 57:1 showed better water dispersibility.

This paper attempts to develop a synergistic strategy based on the multipurpose use of inorganic materials in adsorption treatment of pigment wastewater and preparation of core-modified PR 57:1.

Laser point clouds are a 3D reconstruction method with wide range, high accuracy and strong adaptability. Therefore, the purpose is to discover a construction point cloud extraction method that can obtain complete information about the construction of rebar, facilitating construction quality inspection and tunnel data archiving, to reduce the cost and complexity of construction management.

Firstly, this paper analyzes the point cloud data of the tunnel during the construction phase, extracts the main features of the rebar data and proposes an M-E-L recognition method. Secondly, based on the actual conditions of the tunnel and the specifications of Chinese tunnel engineering, a rebar model experiment is designed to obtain experimental data. Finally, the feasibility and accuracy of the M-E-L recognition method are analyzed and tested based on the experimental data from the model.

Based on tunnel morphology characteristics, data preprocessing, Euclidean clustering and PCA shape extraction methods, a M-E-L identification algorithm is proposed for identifying secondary lining rebars in highway tunnel construction stages. The algorithm achieves 100% extraction of the first-layer rebars, allowing for the three-dimensional visualization of the on-site rebar situation. Subsequently, through data processing, rebar dimensions and spacings can be obtained. For the second-layer rebars, 55% extraction is achieved, providing information on the rebar skeleton and partial rebar details at the construction site. These extracted data can be further processed to verify compliance with construction requirements.

This paper introduces a laser point cloud method for double-layer rebar identification in tunnels. Current methods rely heavily on manual detection, lacking objectivity. Objective approaches for automatic rebar identification include image-based and LiDAR-based methods. Image-based methods are constrained by tunnel lighting conditions, while LiDAR focuses on straight rebar skeletons. Our research proposes a 3D point cloud recognition algorithm for tunnel lining rebar. This method can extract double-layer rebars and obtain construction rebar dimensions, enhancing management efficiency.

Given the current friction and wear challenges faced by automobile parts and bearings, this study aims to identify a novel texture for creating anti-friction and wear-resistant surfaces. This includes detailing the preparation process with the objective of mitigating friction and wear in working conditions.

Femtosecond laser technology was used to create a mango-shaped texture on the surface of GCr15 bearing steel. The optimized processing technology of the texture surface was obtained through adjusting the laser scanning speed. The tribological behavior of the laser-textured surface was investigated using a reciprocating tribometer.

The friction coefficient of the mango-shaped texture surface is 25% lower than that of the conventional surface, this can be attributed to the reduced contact area between the friction ball and the micro-textured surface, leading to stress concentration at the extrusion edge and a larger stress distribution area on the contact part of the ball and disk compared to the conventional surface and the function of the micro-texture in storing wear chips during the sliding process, thereby reducing secondary wear.

The mango-shaped textured surface in this study demonstrates effective solutions for some of the friction and wear issues, offering significant benefits for equipment operation under light load conditions.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2024-0127/