Search results

The restoration and strengthening of QT600 is an industry bottleneck challenge. The Co-12 cladding layer has great wear and corrosion resistance. The purpose of this paper is to quantitatively reveal the transient evolution law of the corrosion process of Co-12 cladding layer on QT600 surface.

In this paper, a three-dimensional numerical model of the corrosion process of Co-12 cladding layer by QT600 laser cladding is established. The interaction between pitting pits and corrosion medium is considered to reveal the transient evolution of ion concentration, electrode potential, pH and corrosion rate at different locations.

The calculation shows that the ion concentration in pitting pit changes Cl⁻>Co²⁺>Na⁺, pH value decreases from top to bottom and corrosion rate at bottom is greater than that at top. The electrochemical corrosion test of Co-12 cladding layer was carried out. It is shown that the current density of QT600 increases by an order of magnitude compared to the Co-12 cladding layer, and the corrosion rate is 4.862 times higher than that of the cladding layer.

The results show that Co-12 cladding layer has great corrosion resistance, which provides an effective way for QT600 protection.

The purpose of this study is to evaluate and address the energy efficiency prevalent within the Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) countries, a diverse group that constitutes a significant portion of the global gross domestic product. By assessing energy efficiency, the study aims to inform strategies that foster sustainable economic growth and environmental sustainability within these nations.

This research uses a three-stage slacks-based measure data envelopment analysis (SBM-DEA) model, enhanced by stochastic frontier analysis (SFA), to assess the energy efficiency of CPTPP countries over the period from 2000 to 2015. The three-stage SBM-DEA model allows for a comprehensive analysis by first measuring energy efficiency, then adjusting for external environmental factors and statistical noise through SFA, and finally, reevaluating efficiency with adjusted inputs.

The analysis reveals significant disparities in energy efficiency among CPTPP nations, identifying both high-performing countries and those needing considerable improvements. Developed countries within the CPTPP generally exhibit higher energy efficiency levels, which can be attributed to their adoption of advanced technologies and strong policy frameworks. In contrast, developing nations demonstrate greater vulnerability to external environmental factors affecting their energy efficiency.

The research fills a gap in the literature by providing a nuanced and comprehensive evaluation of energy efficiency across a significant and economically diverse group of nations, offering valuable insights for sustainable development within the CPTPP framework.

This study aims to analyze the spinning consistency index (SCI) and its impact on yarn quality. It focuses on the relationship between SCI and the final properties of 30 Ne carded hosiery yarn. By evaluating key quality parameters, the research seeks to determine how SCI can serve as a predictive tool for optimizing yarn production.

The study involved producing 30 Ne carded hosiery yarn and rigorously testing its properties using the Uster Evenness Tester-5. Various quality parameters, including neps content, mass irregularity, yarn imperfections and tensile behavior, were evaluated at each processing stage.

The findings reveal that Type 1 yarn demonstrated a count strength product value approximately 15% higher than the other two types. In addition, it exhibited a CVm% that was 18% lower, highlighting reduced mass variation and enhanced uniformity. Regarding imperfections, Type 1 yarn showed a 25% reduction compared to the other two types, reflecting improved fiber spinnability and overall yarn performance.

This research thoroughly examines SCI’s role in yarn production, highlighting its predictive value for optimizing yarn quality. The study offers valuable insights for textile manufacturers seeking to enhance the efficiency and effectiveness of their spinning processes, ultimately contributing to the development of higher-quality textile products.

This study aims to investigate the effect of galvanic corrosion on the sulfide stress corrosion cracking (SSCC) of X80/Inconel 625 weld overlay by altering the cathode/anode area ratios, Na₂S₂O₃ concentrations and temperatures.

The effects of galvanic corrosion on X80/Inconel 625 weld overlay SSCC were investigated by immersion test, galvanic corrosion current test, electrochemical measurement, four-point bending experiment, hydrogen permeation experiment and scanning electron microscopy.

The anodic dissolution of the fusion boundary was enhanced as the cathode/anode area ratio increased, which is necessary for the SSCC of the X80/Inconel 625 weld overlay. However, severe galvanic corrosion reduced the SSCC susceptibility. The SSCC susceptibility showed a linear increase with Na₂S₂O₃ concentration in the range of 10⁻⁴ ∼ 10⁻² mol/L. However, further increasing the Na₂S₂O₃ concentration to 10⁻¹ mol/L resulted in the disappearance of SSCC. This is likely because sufficient hydrogen was required for SSCC initiation even under severe anodic dissolution conditions, which was further supported by the reduced SSCC susceptivity at elevated temperatures.

Limited studies aim to establish the relationship between the galvanic corrosion and SSCC of welded joints through altering the cathode/anode area ratios, Na₂S₂O₃ concentrations and temperatures. This work will pave the way for understanding the effect of galvanic corrosion on the SSCC of dissimilar weld joints.

Social media platforms (SMPs) are pivotal in information dissemination and molding public opinion. Various platforms exhibit differences and characteristics. It is necessary to compare and analyze the roles played by different platforms in the evolution of public events.

This study develops a framework to evaluate the role of SMPs at different stages of public events. To calculate some of these indicators, the GPT-AP-TextRank topic model is constructed. The study further analyzes the correlation between indicators at different stages and SMP’s role and compares SMP’s different roles among the four stages.

The results reveal significant disparities in the role of different SMPs during public events. Weibo demonstrates notable performance during the outbreak, spread and recession stages of the event, exhibiting a strong influence on public event evolution. Bilibili, Douban, Zhihu and Baidu Tieba show relatively ordinary roles. In addition, compared to the spread stage, SMPs exhibit a stronger ability to influence event redirection in the initial stage, which is different from the original assumption of the study.

The findings expose the powerful roles of SMPs in event evolution, providing valuable insights for enhancing public event governance.

This study proposes an evaluation method for SMPs’ role and introduces a novel GPT-AP-TextRank topic generation model for the indicator calculation.

Mianzi can powerfully influence tourists’ behavior. Compared with product brands, destination brands are more multidimensional, consisting of intangible and tangible elements. Therefore, this paper aims to explore the relationships among the Chinese culture-related variable mianzi, destination product quality, destination service quality, destination brand value, destination brand resonance, destination brand self-congruity and destination overall brand equity.

A questionnaire survey was conducted in 2021, yielding 475 valid responses from tourists who had traveled to Hainan, China. Data was analyzed using structural equation modeling.

The results showed that mianzi plays a significant role in shopping destination brand equity, and the mianzi effect shapes tourists’ positive perceptions of destination product and service quality. Meanwhile, destination product quality and service quality enhance shopping destinations’ overall brand equity through destination brand value, brand resonance and brand self-congruity.

This study, focusing on shopping destinations, presents a novel view of brand equity. The research also uncovers influencing factors (e.g. product quality and service quality) that further enrich the destination brand equity model. Finally, findings offer valuable insights for academic research and the practical development of shopping destinations.

面子能有力地影响游客的行为。与产品品牌相比, 目的地品牌更加多维, 由无形要素和有形要素构成。因此, 本文旨在探讨与中国文化相关的变量面子、目的地产品质量、目的地服务质量、目的地品牌价值、目的地品牌共鸣、目的地品牌自我一致和目的地整体品牌资产之间的关系。

2021年对去过中国海南旅游的游客进行问卷调查, 最终获取了 475 份有效问卷。

果表明, 结果表明面子在购物目的地品牌资产中发挥着重要作用, 面子效应塑造了游客对目的地产品和服务质量的积极认知。同时, 目的地产品质量和服务质量通过目的地品牌价值、品牌共鸣和品牌自我一致提升了购物目的地的整体品牌资产。

本研究以购物目的地为重点, 提出了一种新颖的品牌资产观点。研究还发现了一些影响因素（如产品质量和服务质量）, 进一步丰富了目的地品牌资产模型。最后, 研究结果为学术研究和购物目的地的实际发展提供了宝贵的见解。

Mianzi puede influir poderosamente en el comportamiento de los turistas. En comparación con las marcas de producto, las marcas de destino son más multidimensionales y constan de elementos intangibles y tangibles. Por lo tanto, este artículo pretende explorar las relaciones entre la variable mianzi relacionada con la cultura china, la calidad del producto del destino, la calidad del servicio del destino, el valor de la marca del destino, la resonancia de la marca del destino, la autocongruencia de la marca del destino y el valor general de la marca del destino.

En 2021 se llevó a cabo una encuesta por cuestionario, que arrojó 475 respuestas válidas de turistas que habían viajado a Hainan, China. Los datos se analizaron mediante un modelo de ecuaciones estructurales.

Los resultados mostraron que el mianzi desempeña un papel significativo en el valor de marca de los destinos de compras, y que el efecto mianzi determina las percepciones positivas de los turistas sobre la calidad de los productos y servicios del destino. Por su parte, la calidad de los productos y servicios del destino mejora el valor de marca global de los destinos de compras a través del valor de marca del destino, la resonancia de la marca y la autocongruencia de la marca.

Este estudio, centrado en los destinos de compras, presenta una visión novedosa del valor de marca. La investigación también descubre factores influyentes (por ejemplo, la calidad del producto y la calidad del servicio) que enriquecen aún más el modelo de valor de marca del destino. Por último, los resultados ofrecen valiosas perspectivas para la investigación académica y el desarrollo práctico de los destinos de compras.

This study aims to investigate the temperature rise characteristics of vibrating rolling bearings under the influence of the polarization force of unbalanced eccentric blocks. A thermal-fluid-solid mechanics coupled finite element model is established to analyze the effects of different loads and rotational speeds on bearing temperature to prevent overheating, wear and thermal damage.

A thermal-fluid-solid mechanics coupled finite element model of the vibrating rolling bearing is developed based on the principles of heat transfer. Finite element analysis software is used to conduct numerical simulations and study the temperature distribution of the bearing system under different loads and speeds. The model’s accuracy is verified by experimentally measuring the actual temperature of the bearing under the same working conditions.

This study successfully established a thermal-fluid-solid mechanics coupled finite element model of a vibrating rolling bearing, verifying its accuracy and reliability. The research results provide an essential reference for optimizing bearing design, preventing overheating and extending service life.

By analyzing the temperature rise characteristics under various load and rotational speed conditions, the law governing the internal temperature distribution of bearings is revealed. This finding offers a theoretical foundation for comprehending the thermal behavior of bearings.

This study offers a scientific foundation for the maintenance and fault diagnosis of shaker rolling bearings, aiding in the timely identification and resolution of thermal damage issues. Through the optimization of bearing design and usage conditions, the equipment’s lifespan can be prolonged, maintenance expenses can be minimized and production efficiency can be enhanced.

A thermal-fluid-solid mechanics coupled finite element model of a vibrating rolling bearing was established, considering the interaction of multiple physical fields. The influence of the polarization force from the unbalanced eccentric block on the bearing temperature is analyzed in detail, which is close to the actual working conditions.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-10-2024-0396/

This study aims to examine whether authentic flirting behavior contributes to positive service outcomes (i.e. rapport and tip size) in luxury vs non-luxury restaurants.

A sample of 261 participants was randomly assigned to reading scenarios depicting four conditions in a 2 × 2 between-subjects design: restaurant status (luxury vs non-luxury) and flirting type: authentic vs fake.

The results showed that rapport mediated the relationship between flirting type and tip size. Moderated mediation analyses further revealed that the mediated relationship was stronger for non-luxury restaurants alone. Whereas authentic flirting amplified rapport and tip size in non-luxury restaurants, it had no effect in luxury restaurants.

Flirtatious behavior has not been examined in the context of luxury restaurants. This study provided an opportunity to explore whether flirting would be perceived as unprofessional and as exceeding personal boundaries as in other settings, damaging to the meticulous service experience, or whether interpersonal friendly gestures can take place without undermining the service interaction.

The discourse traverses the intricate landscape of the metaverse, exploring its evolution, intricacies, and the symbiotic integration of artificial intelligence (AI). The metaverse, a virtual realm where individuals interact with digital entities, burgeons from a decades-old concept to a contemporary reality, captivating attention with its immersive potential. The union of AI and the metaverse heralds unprecedented possibilities and challenges. It fuels personalized recommendations, realistic avatars, intelligent Non-Playable Character (NPCs), and predictive analytics. However, concerns loom, spanning addiction, privacy, and security, as users immerse themselves in virtual realms, potentially neglecting real-world responsibilities and sharing sensitive information has been discussed in this chapter. The narrative further delves into the metaverse's anatomy, delineating its infrastructure, hardware, software, content creation, and commerce. The integration of AI into metaverse security epitomizes a confluence of innovation and growth. Balancing the potential benefits and risks, stakeholders embark on a journey toward a secure, immersive digital realm. The discourse advocates for proactive and responsible AI usage, encompassing transparency, accountability, and trustworthiness. Regulatory frameworks and standards emerge as essential guardrails, protecting user privacy and forestalling AI misuse.