Search results

This paper aims to analyze brand loyalty and electronic word-of-mouth (eWOM) antecedents in restaurants: (1) utilitarian and hedonic benefits, (2) brand satisfaction and (3) brand love. It also provides valuable knowledge through the comparison between positive and negative restaurant experiences.

A survey was carried out of restaurant satisfied and dissatisfied consumers. Structural equation modeling (SEM) and multi-group analysis (MGA) were performed to examine the cause-and-effect relationship in both groups.

The results show the relevance of benefits, brand satisfaction and brand love as causes for brand loyalty and e-WOM. Also, these relationships are significantly stronger for dissatisfied consumers than for satisfied ones.

The outcome of the research provides new insights to develop a conceptual stimulus-organism-response (S-O-R) model of consumers’ restaurant behavior by drawing comparisons across satisfied and dissatisfied ones.

This research focuses on analyzing the impact of digital transformation (DT) on the green innovation performance of Spanish wineries, as well as the mediating effect of green knowledge sharing (GKS) on this main relationship, as well as the moderating role of top management environmental awareness (TMEA) on the GKS-green innovation performance linkage. In addition, age, size and protected designation of origin (PDO) membership are used to increase the precision of the cause–effect relationships examined.

The study proposes a conceptual model based on previous studies, which is tested using partial least squares structural equation modeling, with data collected from 196 Spanish wineries between September 2022 and January 2023.

The results of the research reveal the existence of a positive and significant relationship between the development of DT and green innovation performance of Spanish wineries, as well as the partial mediation of GKS in this link and a positive moderation of TMEA in the GKS-green innovation performance bond.

Winery executives should prioritize aligning DT with TMEA to drive green innovation performance. Additionally, it is recommended that they actively promote GKS within their wineries to enhance sustainability performance and strengthen their competitive positioning in an eco-conscious market.

The originality of the study derives from its pioneering character, as the research enters unexplored terrain by investigating the role of the GKS as a mediator in the relationship between DT and green innovation performance, as no previous research has ventured in this direction.

As a highly knowledge-intensive activity, digitalization is changing the construction industry landscape and is encouraging construction firms to explore the transformation. This study establishes a new theoretical model aimed at examining the impact of three types of intellectual capital (IC) on digitalization through the lens of knowledge-based view and explores how IC and digitalization influence sustainability performance from the triple bottom line principles.

A questionnaire survey was conducted to collect data from Chinese construction firms using convenience sampling. A total of 181 valid responses were obtained. Then, a partial least squares structural equation modelling (PLS-SEM) technique was executed through Smart PLS 3.0 software. The measurement model was assessed to ensure reliability and validity, and the structural model was analysed to test the proposed hypotheses.

The empirical results confirm the positive impact of IC on digitalization and digitalization on sustainability performance. Moreover, digitalization plays a significant mediating role in the relationship between IC and sustainability performance.

The results provide empirical evidence supporting the different roles of IC and digitalization in improving sustainability. The findings contribute to enhancing the understanding of digitalization practices from the perspective of IC and provide theoretical and managerial implications for sustainability issues in the context of the construction industry.

Despite several attempts to integrate building information modeling (BIM) with building circularity assessment (BCA), no systematic review has yet been carried out on this topic to the best knowledge of the authors. The objective of this review is to fill this gap by reviewing the current attempts, identifying the tools and exploring the state-of-the-art in BIM and BCA.

A systematic literature review (SLR) methodology was employed. A total of 30 documents published between 2015 and 2023 were selected and analyzed across the concept, methodology and value dimensions.

There has been an increase in the development of BIM-based BCA tools in recent years, with the Netherlands taking the lead. Most tools developed were based on the material circularity indicator (MCI) and by using Autodesk Revit as BIM software. Three integration approaches for BIM with BCA were identified: (1) using an external platform; (2) linking an external database to BIM and (3) within the BIM environment. The review has revealed that still there is no standard for BCA, and interoperability and lack of circularity databases are the major challenges.

Although the paper has made contributions, it is important to recognize certain limitations. One of these is the inability to explore all the tools in depth as some of them are not available or accessible. Another limitation is the relatively small number of studies that were reviewed, primarily because there is a lack of research in this area due to the BIM-based BCA is still in its infancy compared to the BIM-based LCA.

This study contributes to providing a comprehensive up-to-date overview of recent advancements in BIM–BCA integration, as well as a framework for understanding its concept, methodology and value dimensions. It also highlights significant areas where practitioners and researchers can identify knowledge gaps and future research directions.

Following the recent rise in generative artificial intelligence (GenAI) tools, fundamental questions about their wider impacts have started to reverberate around various disciplines. This study aims to track the unfolding landscape of general issues surrounding GenAI tools and to elucidate the specific opportunities and limitations of these tools as part of the technology-assisted enhancement of mechanical engineering education and professional practices.

As part of the investigation, the authors conduct and present a brief scientometric analysis of recently published studies to unravel the emerging trend on the subject matter. Furthermore, experimentation was done with selected GenAI tools (Bard, ChatGPT, DALL.E and 3DGPT) for mechanical engineering-related tasks.

The study identified several pedagogical and professional opportunities and guidelines for deploying GenAI tools in mechanical engineering. Besides, the study highlights some pitfalls of GenAI tools for analytical reasoning tasks (e.g., subtle errors in computation involving unit conversions) and sketching/image generation tasks (e.g., poor demonstration of symmetry).

To the best of the authors’ knowledge, this study presents the first thorough assessment of the potential of GenAI from the lens of the mechanical engineering field. Combining scientometric analysis, experimentation and pedagogical insights, the study provides a unique focus on the implications of GenAI tools for material selection/discovery in product design, manufacturing troubleshooting, technical documentation and product positioning, among others.

The present research is trying to construct the network of relationships between different department of an organization during the design and development of car engine. Analyzing the structure of the network, finding the patterns of collaborations, and determining the important departments are the main purposes of the present research.

Improving relationships during a project life is an effective way to enhance employee performance in project-oriented organizations. This paper examines the collaborative relationships between internal project stakeholders through social network analysis (SNA) in a project for the design and development of car engine. In the first step of the research, the network of internal stakeholders was studied based on collaboration in the common activities performed by the resources. Then, the network of correspondences between internal stakeholders was studied. Finally, the two networks were integrated into a single network.

In the integrated network, the “fuel and combustion department” had the largest degree centrality (i.e. highest collaboration with others). The “integration department” was found to have the highest closeness centrality (i.e. more rapid access to other nodes). Furthermore, the “procurement department” had the highest betweenness centrality (i.e. the most strategic department). Our results revealed the potential capabilities of SNA method for the project management in the vehicle industry.

The obtained results of the present research show us the value of applying SNA methods and concepts to analyze the inter-organizational network of the Project Stakeholders relationship.

The competition in the academe has always been tough, but today, the academe seems to be more like an industry than an academic community as academics are evaluated through quantified and economic means.

This article leans on Heidegger’s thoughts on the essence of technology and his ontological view on being to show the dangers that lie in this quantification of researchers and research.

Despite the benefits that information systems (ISs) offer to people and research, it seems that technology has made it possible to objectify researchers and research. This has a negative impact on the academe and should thus be looked into especially by the IS field, which should note the problems that exist in its core. This phenomenon of quantified academics is clearly visible at academic quantification sites, where academics are evaluated using metrics that count their output. It seems that the essence of technology has disturbed the way research is valued by emphasising its quantifiable aspects. The study claims that it is important to look for other ways to evaluate researchers rather than trying to maximise research production, which has led to the flooding of articles that few have the time or interest to read.

This paper offers new insights into the current phenomenon of quantification of academics and underlines the need for critical changes if in order to achieve the academic culture that is desirable for future academics.

The sustainability of the construction industry is associated with the productivity, profitability and competitiveness of the firms, which are significantly affected by inefficient site supervision and labour management approaches. This study aims to use a case study with mixed methods to evaluate the site supervisory characteristics in labour management, labour performance assessment and labour productivity measurement towards developing meaningful guidelines in polishing construction supervision attributes.

Well-developed modern apprenticeship elements were applied to 62 construction supervisors who were selected using the snowball sampling method, and their relevant competency characteristics were assessed using a comprehensively developed grading mechanism connected with useful training manuals/tools. Academic reviews, experts’ consultations and other meticulous mixed approaches were applied at different stages of the research plan’s sequential layout.

The mean performance scores of supervisors indicate proficient-level grades in the competency characteristics related to applying efficient labour management procedures and developing-level grades in designing productivity measurement tools, performing assessments on efficiency and productivity and proposing enhancement practices on efficiency and productivity for site operations. The findings point to a modern generalised guideline that establishes the ranges of supervisory attributes within the scope of the study. The validity, reliability, adaptability and generalisability of the findings were assured by using pertinent statistical tests and professional assessments.

Though the study’s conclusions/findings are primarily applicable to the construction environment of a developing country comparable to the Sri Lankan context, they will considerably impact current/future industrial practices in various other countries and emerging industries.

The research has produced a conceptualised modern tool that guides determining the capacity levels of supervisory attributes for carrying out labour management, labour performance assessment and labour productivity measurement aspects in construction. The research has opened a pump that inflows new values of highly workable supervision features for strengthening the site management structures and filling the industry’s knowledge vacuum in the methodical execution of apprenticeships.

Based on social cognitive theory, this study aims to analyze the impact of fear of failure on entrepreneurs’ growth aspirations, the moderating role of collectivist institutional culture and the differences between emerging and developed countries.

Using the Global Entrepreneurship Monitor and the Global Leadership and Organizational Behavior Effectiveness databases for 27 developed and 15 emerging countries, and Global Leadership and Organizational Behavior Effectiveness, the authors apply multilevel model with individual-level and country-level variables.

The fear of failure has a negative impact on growth aspirations and that impact differs between developed and emerging countries. One of the main conclusions is that collectivist culture mitigates the negative impact of fear of failure on growth aspirations, and that this result is significant only in emerging countries.

The authors introduce a boundary condition for this study’s predictions, showing that in emerging countries, contrary to developed countries, the moderator effect of cultural context contributes to growth aspirations, despite the entrepreneur’s fear of failure.

This study aims to examine the association between workplace spirituality (WPS) and individual’s work engagement (WE) and also the mediating effect of individual’s psychological conditions [psychological meaningfulness (PSYM), psychological safety (PSYS) and psychological availability (PSYA)] on this relationship.

Grounded on Kahn’s personal engagement theory, a model has been developed with WPS as an independent variable, individual’s psychological conditions (PSYM, PSYS and PSYA) as the mediators and individual’s WE as the dependent variable. Based on the online responses from 510 millennial employees working in Fortune 500 manufacturing and service industries operating in India, analysis has been undertaken using confirmatory factor analysis, Pearson correlation and PROCESS macro of Hayes (2017).

WPS has been noted to influence individual’s WE positively and there is a partial mediation of PSYM, PSYS and PSYA on this relationship.

The present study is able to extend the scope of Kahn’s personal engagement theory.

Leaders and HR administrators can use the framework to ensure positive engagement levels for the millennial workforce. It will also help to reduce job dissatisfaction and burnouts at the workplace.

The present study contributes to understanding WE through the lens of WPS. It adds to the existing knowledge by explaining the mediation of the psychological conditions between spirituality and WE among millennials working in India. To the best of the authors’ knowledge, this study can be considered one of the first studies that has attempted to understand the role of WPS and psychological conditions on WE levels of millennials.