Search results

The COVID-19 pandemic has significantly affected service small- and medium-sized enterprises (SMEs), increasing the importance of understanding how these businesses can become more resilient and how service innovation can be an effective strategy to increase their adaptive capacity and survival. This study aims to examine the role of dynamic capabilities in service innovation as a factor explaining the resilience of SMEs in Puerto Rico and the Dominican Republic during the COVID-19 crisis and its impact on service innovation. Additionally, the authors assess whether service innovation has a significant impact on value cocreation in these businesses.

This study used a quantitative method by surveying 118 SME owners in Puerto Rico and the Dominican Republic. The data were analyzed using partial least-squares structural equation modeling.

The results reflect important theoretical contributions by analyzing resilience from an innovation perspective instead of a retrospective approach, which is an area that has not been analyzed in the literature. Additionally, theoretical contributions to marketing services in SMEs are discussed, which is an underresearched topic. The results advance by discussing the role of service innovation through the reconfiguration of resources and how this can be an effective strategy to increase value cocreation with customers during crises.

This study is original in that it analyzes resilience from the perspective of innovation, and not from a retrospective approach. It offers a vision in response to the need for studies that provide a clearer conceptualization of resilience in small businesses. This highlights the importance of considering regional differences and service innovation as effective strategies to enhance resilience and value cocreation with customers.

Presently in multicolor fused filament-based three-dimensional (3-D) printing, significant amounts of waste material are produced through nozzle priming and purging each time a change from one color to another occurs. G-code generating slicing software typically changes the material on each layer resulting in wipe towers with greater mass than the target object. The purpose of this study is to provide an alternative fabrication approach based on interlayer tool clustering (ITC) for the first time, which reduces the number of tool changes and is compatible with any commercial 3-D printer without the need for hardware modifications.

The authors have developed an open-source PrusaSlicer upgrade, compatible with Slic3r-based software, which uses the described algorithm to generate g-code toolpath and print experimental objects. The theoretical time, material and energy savings are calculated and validated to evaluate the proposed fabrication method qualitatively and quantitatively.

The experimental results show the novel ITC method can significantly increase the efficiency of multimaterial printing, with an average 1.7-fold reduction in material use, and an average 1.4-fold reduction in both time and 3-D printing energy use. In addition, this approach reduces the likelihood of technical failures in the manufacturing of the entire part by reducing the number of tool changes, or material transitions, on average by 2.4 times.

The obtained results support distributed recycling and additive manufacturing, which has both environmental and economic benefits and increasing the number of colors in a 3-D print increases manufacturing savings.

Wool fiber is accepted as one of the natural and renewable sources and has been used in the apparel and textile industry since ancient times. However, wool fiber has the highest global warming potential value among conventional fibres due to its high land use and high methane gas generation. This study aimed to recycle the wool fabric wastes and also to create a mini eco-collection by using the produced yarns.

This manuscript aimed to evaluate the fabric wastes of a woolen fabric producer company. Fabric wastes were opened with two different opening systems and fiber properties were determined. First, conventional ring yarns were produced in the company’s own spinning mill by mixing the opened fibres with the long fiber wastes of the company. In addition, opening wastes were mixed with different fibres (polyester, long wool waste, and Tencel fibres) between 25% and 70% in the short-staple yarn spinning mill and used in the production of conventional ring and OE-rotor yarns. Most of the yarns contained waste fibres at 50%. Recycled and virgin yarns were used as a weft and warp yarn and a total of 270 woven fabric samples were obtained and fabric properties were examined. Also, a fabric collection was created. A life cycle assessment (LCA) was made for one of the selected yarns.

At the end of the study, it was determined that it was possible to produce yarn and fabric samples from fiber blends containing high waste fiber ratios beyond 50%. All the woven fabric samples produced from conventional ring and OE-rotor yarns gave higher breaking, tearing and stitch slip strength values in the weft and warp direction than limit quality values of the company. In addition, abrasion resistance and WIRA steam stability properties of the fabric samples were also sufficient. Environmental analysis of the recycling of the wastes showed a possible decrease of about 9940034.3 kg CO2e per year in the global warming potential. In addition, fiber raw material expenses reduced yarn production cost about 50% in case of opened fabric waste usage. However, due to insufficient pilling resistance results, it was decided to evaluate the woven fabrics for the product groups such as shawls and blankets, where pilling resistance is less sought.

The original aspects of the article can be summarized under two headings. First, there are limited studies on the evaluation of wool wastes compared to cotton and polyester fibres and the number of samples examined was limited. However, this study was quite comprehensive in terms of opening type (rag and tearing), spinning systems (long and short spinning processes), fiber blends (waste 100% and blends with polyester, long wool waste and Tencel fibres) and yarn counts (coarser and finer). Recycled and virgin yarns were used as a weft and warp yarn and a total of 270 woven fabric samples were obtained using different colour combinations and weave types. All processes from fabric waste to product production were followed and evaluated. Life cycle assessment (LCA) and cost analysis was also done. The second unique aspect is that the problem of a real wool company was handled by taking the waste of the woolen company and a collection was created for the customer group of the company. Production was made under real production conditions. Therefore, this study will provide important findings to the research field about recycling, sustainability etc.

Civic education in the US has historically centered the nation-state. This is often disempowering for marginalized students who exist outside the national narrative and political sphere.

This year-long ethnographic study considers what counts as civic education in the US Virgin Islands, a territory of the US. This paper draws on critical theory and critical pedagogy to understand ways teachers in a politically and culturally marginalized space can reimagine civic education. Classroom observations, interviews and curriculum content analysis are used as data.

The findings suggest that teachers centered the local by surfacing the unjust political relationship between the US and its territories and incorporating local history, civic engagement, resistance and culture to politically empower their students.

This research will contribute a deeper understanding of the possibilities for civic education to be empowering for those who are marginalized and often excluded from the national political arena.

The current study aims to develop a 3D-printed continuous metal fiber-reinforced recycled thermoplastic composite using an in-nozzle impregnation technique.

Recycled acrylonitrile butadiene styrene (RABS) plastic was blended with virgin ABS (VABS) plastic in a ratio of 60:40 weight proportion to develop a 3D printing filament that was used as a matrix material, while post-used continuous brass wire (CBW) was used as a reinforcement. 3D printing was done by using a self-customized print head to fabricate the flexural, compression and interlaminar shear stress (ILSS) test samples to evaluate the bending, compressive and ILSS properties of the build samples and compared with VABS and RABS-B samples. Moreover, the physical properties of the samples were also analyzed.

Upon three-point bend, compression and ILSS testing, it was found that RABS-B/CBW composite 3D printed with 0.7 mm layer width exhibited a notable improvement in maximum flexural load (L_max), flexural stress at maximum load (sf_max), flex modulus (E_f) and work of fracture (WOF), compression modulus (E_c) and ILSS properties by 30.5%, 49.6%, 88.4% 13.8, 21.6% and 30.3% respectively.

Limited research has been conducted on the in-nozzle impregnation technique for 3D printing metal fiber-reinforced recycled thermoplastic composites. Adopting this method holds the potential to create durable and high-strength sustainable composites suitable for engineering applications, thereby diminishing dependence on virgin materials.

This study aims to present an experimental approach to develop a high-strength 3D-printed recycled polymer composite reinforced with continuous metal fiber.

The continuous metal fiber composite was 3D printed using recycled and virgin acrylonitrile butadiene styrene-blended filament (RABS-B) in the ratio of 60:40 and postused continuous brass wire (CBW). The 3D printing was done using an in-nozzle impregnation technique using an FFF printer installed with a self-modified nozzle. The tensile and single-edge notch bend (SENB) test samples are fabricated to evaluate the tensile and fracture toughness properties compared with VABS and RABS-B samples.

The tensile and SENB tests revealed that RABS-B/CBW composite 3D printed with 0.7 mm layer spacing exhibited a notable improvement in Young’s modulus, ultimate tensile strength, elongation at maximum load and fracture toughness by 51.47%, 18.67% and 107.3% and 22.75% compared to VABS, respectively.

This novel approach of integrating CBW with recycled thermoplastic represents a significant leap forward in material science, delivering superior strength and unlocking the potential for advanced, sustainable composites in demanding engineering fields.

Limited research has been conducted on the in-nozzle impregnation technique for 3D printing metal fiber-reinforced recycled thermoplastic composites. Adopting this method holds the potential to create durable and high-strength sustainable composites suitable for engineering applications, thereby diminishing dependence on virgin materials.

Waste generated from electrical and electronic equipment, collectively known as E-waste, remains a persistent environmental, economic and social problem. Sustainable E-waste management (EWM) has numerous benefits, such as preventing electronic waste from entering landfills, reducing the need for virgin materials by recovering valuable materials from recycling and lowering greenhouse gas emissions. Circular economy (CE) practices are considered the initial steps toward sustainable EWM, but some hurdles have been reported in the adoption of these practices. Therefore, the current study aims to identify the common CE practices, sustainability of the EWM process and the challenges in EWM, and to develop a conceptual framework for effective EWM.

Very few studies have proposed frameworks that acknowledge the challenges and CE practices of EWM. To fill this gap, a systematic literature review (SLR) was performed, and 169 research articles were explored.

A total of seven challenges in the adoption of effective EWM were identified: rules and policy, infrastructure, consumer behaviour, informal sectors, community culture, technology and economy. Eight common CE practices were also found for effective EWM: reuse, recycle, remanufacturing, refurbishment, repair, reduce, recover and repurpose.

A conceptual framework guiding sustainable EWM was proposed, which includes solutions for the identified challenges, and CE practices with sustainable benefits.

Intumescent coatings are nowadays a dominant passive system used to protect structural materials in case of fire. Due to their reactive swelling behaviour, intumescent coatings are particularly complex materials to be modelled and predicted, which can be extremely useful especially for performance-based fire safety designs. In addition, many parameters influence their performance, and this challenges the definition and quantification of their material properties. Several approaches and models of various complexities are proposed in the literature, and they are reviewed and analysed in a critical literature review.

Analytical, finite-difference and finite-element methods for modelling intumescent coatings are compared, followed by the definition and quantification of the main physical, thermal, and optical properties of intumescent coatings: swelled thickness, thermal conductivity and resistance, density, specific heat capacity, and emissivity/absorptivity.

The study highlights the scarce consideration of key influencing factors on the material properties, and the tendency to simplify the problem into effective thermo-physical properties, such as effective thermal conductivity. As a conclusion, the literature review underlines the lack of homogenisation of modelling approaches and material properties, as well as the need for a universal modelling method that can generally simulate the performance of intumescent coatings, combine the large amount of published experimental data, and reliably produce fire-safe performance-based designs.

Due to their limited applicability, high complexity and little comparability, the presented literature review does not focus on analysing and comparing different multi-component models, constituted of many model-specific input parameters. On the contrary, the presented literature review compares various approaches, models and thermo-physical properties which primarily focusses on solving the heat transfer problem through swelling intumescent systems.

The presented literature review analyses and discusses the various modelling approaches to describe and predict the behaviour of swelling intumescent coatings as fire protection for structural materials. Due to the vast variety of available commercial products and potential testing conditions, these data are rarely compared and combined to achieve an overall understanding on the response of intumescent coatings as fire protection measure. The study highlights the lack of information and homogenisation of various modelling approaches, and it underlines the research needs about several aspects related to the intumescent coating behaviour modelling, also providing some useful suggestions for future studies.

Social disclosure is a vital tool that can help organizations in developing economies, including Nigeria, measure and manage their social impacts and performances. This could help in achieving sustainable development goals and enhancing social and economic security. This paper aims to conceptualize the influence of social reporting and sustainable development on Nigeria’s socioeconomic security. It is vital for its recommendations to the government and stakeholders on the way forward on sustainable development and national security.

A dissection through content analyses using the frustration-aggression and social contract theories was made on the influence of voluntary social reporting and sustainable development on socioeconomic security in Nigeria. An examination and assessment of the implementation of social disclosure by organizations and its effectiveness in promoting sustainable development with insights into the challenges and opportunities in a developing economy like the Nigerian context was done.

The results showed an increasingly negative trend in social and economic circles brought about by business organizations’ nonmandatory disclosure of social and environmental information. Therefore, it is suggested that governments should have a strong will to implement mandatory reporting to avoid future political catastrophes.

Implications emerged from this study inform policymakers, businesses and other stakeholders on the ways to enhance mandatory social sustainability in Nigeria.

This report is unique in the sense that it considers the interplay between sustainable development and socioeconomic security moderated by voluntary social disclosure as a virgin area in studies that involve developing economies.

Throughout the world, women encounter strong patriarchal values that promote the virtue of women's chastity. Within numerous conservative societies, such as certain regions of the Islamic Republic of Pakistan, the intactness of the hymen in a young woman is viewed as emblematic of her dignity, righteousness, and pride. Participants in our investigations highlighted that hymen rupture stigma remains prevalent in many parts of Pakistan, often leading to social consequences or disapproval of women who want to participate in sports. Additionally, participants disclosed that some women had internalized the hymen rupture stigma, and families might reinforce it. This chapter contributes to the limited scholarship concerning how social norms, hymen rupture stigma, and family values influence Muslim women's participation or lack of participation in sports in Pakistan.