Search results

Polyurethane (PUR) foam parts are traditionally manufactured using metallic molds, an unsuitable approach for prototyping purposes. Thus, rapid tooling of disposable molds using fused filament fabrication (FFF) with polylactic acid (PLA) and glycol-modified polyethylene terephthalate (PETG) is proposed as an economical, simpler and faster solution compared to traditional metallic molds or three-dimensional (3D) printing with other difficult-to-print thermoplastics, which are prone to shrinkage and delamination (acrylonitrile butadiene styrene, polypropilene-PP) or high-cost due to both material and printing equipment expenses (PEEK, polyamides or polycarbonate-PC). The purpose of this study has been to evaluate the ease of release of PUR foam on these materials in combination with release agents to facilitate the mulding/demoulding process.

PETG, PLA and hardenable polylactic acid (PLA 3D870) have been evaluated as mold materials in combination with aqueous and solvent-based release agents within a full design of experiments by three consecutive molding/demolding cycles.

PLA 3D870 has shown the best demoldability. A mold expressly designed to manufacture a foam cushion has been printed and the prototyping has been successfully achieved. The demolding of the part has been easier using a solvent-based release agent, meanwhile the quality has been better when using a water-based one.

The combination of PLA 3D870 and FFF, along with solvent-free water-based release agents, presents a compelling low-cost and eco-friendly alternative to traditional metallic molds and other 3D printing thermoplastics. This innovative approach serves as a viable option for rapid tooling in PUR foam molding.

Surface quality and porosity significantly influence the structural and functional properties of the final product. This study aims to establish and explain the underlying relationships among processing parameters, top surface roughness and porosity level in additively manufactured 316L stainless steel.

A systematic variation of printing process parameters was conducted to print cubic samples based on laser power, speed and their combinations of energy density. Melt pool morphologies and dimensions, surface roughness quantified by arithmetic mean height (Sa) and porosity levels were characterized via optical confocal microscopy.

The study reveals that the laser power required to achieve optimal top surface quality increases with the volumetric energy density (VED) levels. A smooth top surface (Sa < 15 µm) or a rough surface with humps at high VEDs (VED > 133.3 J/mm³) can serve as indicators for fully dense bulk samples, while rough top surfaces resulting from melt pool discontinuity correlate with high porosity levels. Under insufficient VED, melt pool discontinuity dominates the top surface. At high VEDs, surface quality improves with increased power as mitigation of melt pool discontinuity, followed by the deterioration with hump formation.

This study reveals and summarizes the formation mechanism of dominant features on top surface features and offers a potential method to predict the porosity by observing the top surface features with consideration of processing conditions.

This paper aims to investigate and explain the dual fracture behaviour of PA12 specimens sintered by selective laser sintering (SLS) as a function of wall thickness and build direction with a powder mixture 30:70. To achieve this objective, research related to chemical, thermal and structural behaviours as a function of the input variables was carried out to describe and explain why ductile-fragile behaviour occurs during fractures under uniaxial tension manufactured via a methodology of material analysis and manufacturing processes.

The factorial design 32 relates the fracture of PA12 tensile specimens to the horizontal, transverse and vertical build directions at 2.0, 2.5 and 3.0 mm thicknesses, respectively. Fractographic images revealed the fracture surfaces and their dual ductile-fragile behaviour related to the specimens’ measured crystalline, thermal, surface and chemical properties.

The study showed that thermal property variables differ depending on the input variables. The wall thickness variable affected this morphology the most, showing the highest percentage of the ductile area, followed by the transverse and vertical directions. It was determined that the failure in the vertical direction is due to crystalline gradients associated with the layer-by-layer construction process. The pore density may be closely related to generating ductile and brittle areas.

In this paper, fracture characterisation is performed based on the mechanical, chemical, structural, thermal and morphological properties of PA12 manufactured by SLS. In addition, a heatmap of porosities in cross-sections is constructed using a machine learning model (k-means) related to dual fracture behaviour. This research revealed significant differences in the fracture type according to the build direction. In addition, thin-section fractography provides a more detailed explanation of the fragile behaviour of the vertical direction associated with crystalline changes due to the direction of the sintering layers.

The primary aim of this study is to identify and analyze the key digital transformation areas and determine their impact on technological unemployment in the textile sector. In addition, this study explores whether digital transformation contributes to neo-Luddism or Robot Breaking.

The advent of digital transformation has raised significant concerns, particularly concerning technological unemployment. This study focuses on conducting an analytical hierarchical process (AHP) analysis to determine the impact of different disciplines within digital transformation on technological unemployment. The investigation specifically delves into the ongoing transition to Industry 4.0 within the textile industry. This study uses a mixed-method approach, consisting of a literature review, bibliometric analysis, eight expert phenomenological interviews, and AHP.

This study revealed that artificial intelligence, machine learning and deep learning are the most crucial disciplines that will affect the concept of neo-Luddism. The fact that technological unemployment in the textile sector is examined with AHP Analysis makes this study unique.

This study contributes to Industry 4.0 literature by examining the nexus of technological unemployment in textile manufacturing and the emergence of neo-Luddism.

This study aims to investigate the demoulding characteristics of material-jetted rapid mould inserts having different surface textures for micro-injection moulding using in-line measurements and surface metrology.

Material-jetted inserts with the negative cavity of a circular test product were fabricated using different surface finishes and printing configurations, including glossy, matte and vertical settings. In-line measurements included the recording of demoulding forces at 10 kHz, which was necessary to capture the highly-dynamic characteristics. A robust data processing algorithm was used to extract reliable demoulding energies per moulding run. Thermal imaging captured surface temperatures on the inserts after demoulding. Off-line measurements, including focus variation microscopy and scanning electron microscopy, compared surface textures after a total of 60 moulding runs.

A framework for capturing demoulding energies from material-jetted rapid tools was demonstrated and compared to the literature. Glossy surfaces resulted in significantly reduced demoulding forces compared to the industry standard steel moulds in the literature and their material-jetted counterparts. Minimal changes in the surface textures of the material-jetted inserts were found, which could potentially permit their prolonged usage. Significant correlations between surface temperatures and demoulding energies were demonstrated.

The research presented here addresses the very topical issue of demoulding characteristics of soft, rapid tools, which affect the quality of prototyped products and tool durability. This was done using state-of-the-art, high-speed sensing technologies in conjunction with surface metrology and their durability for the first time in the literature.

This study aims to improve the acceleration in the additive manufacturing (AM) process. AM tools, such as extrusion heads, jets, electric arcs, lasers and electron beams (EB), experience negligible forces. However, their speeds are limited by the positioning systems. In addition, a thin tool must travel several kilometers in tiny motions with several turns while realizing the AM part. Hence, acceleration is a more significant limiting factor than the velocity or precision for all except EB.

The sawtooth (ST) scanning strategy presented in this paper minimizes the time by combining three motion features: zigzag scan, 45º or 135º rotation for successive layers in G00 to avoid the CNC interpolation, and modifying these movements along 45º or 135º into sawtooth to halve the turns.

Sawtooth effectiveness is tested using an in-house developed Sand AM (SaAM) apparatus based on the laser–powder bed fusion AM technique. For a simple rectangle layer, the sawtooth achieved a path length reduction of 0.19%–1.49% and reduced the overall time by 3.508–4.889 times, proving that sawtooth uses increased acceleration more effectively than the other three scans. The complex layer study reduced calculated time by 69.80%–139.96% and manufacturing time by 47.35%–86.85%. Sawtooth samples also exhibited less dimensional variation (0.88%) than zigzag 45° (12.94%) along the build direction.

Sawtooth is limited to flying optics AM process.

Development of scanning strategy for flying optics AM process to reduce the warpage by improving the acceleration.

This paper aims to present spot pattern welding (SPW) as a scanning strategy for laser-foil-printing (LFP) additive manufacturing (AM) in place of the previously used continuous pattern welding (CPW) (line-raster scanning). The SPW strategy involves generating a sequence of overlapping spot welds on the metal foil, allowing the laser to form dense and uniform weld beads. This in turn reduces thermal gradients, promotes material consolidation and helps mitigate process-related risks such as thermal cracking, porosity, keyholing and Marangoni effects.

304L stainless steel (SS) feedstock is used to fabricate test specimens using the LFP system. Imaging techniques are used to examine the melt pool dimensions and layer bonding. In addition, the parts are evaluated for residual stresses, mechanical strength and grain size.

Compared to CPW, SPW provides a more reliable heating/cooling relationship that is less dependent on part geometry. The overlapping spot welds distribute heat more evenly, minimizing the risk of elevated temperatures during the AM process. In addition, the resulting dense and uniform weld beads contribute to lower residual stresses in the printed part.

To the best of the authors’ knowledge, this is the first study to thoroughly investigate SPW as a scanning strategy using the LFP process. In general, SPW presents a promising strategy for securing embedded sensors into LFP parts while minimizing residual stresses.

The purpose of this study is to investigate the effect of the sintering temperature on the microstructural, mechanical and physical properties of Cu-SiC composites.

The powder metallurgy route was used to fabricate the samples. Cold compaction of powders was conducted at 250 MPa which was followed by sintering at 850°C–950°C at the interval of 50 °C in the open atmospheric furnace. SiC was used as a reinforcement and the volumetric fraction of the SiC was varied as 10%, 15% and 20%. The processed samples were metallurgically characterized by the scanning electron microscope (SEM). Mechanical characterization was done using tensile and Vickers’ micro-hardness testing to check the hardness and strength of the samples. Archimedes principle and Four-point collinear probe method were used to measure the density and electrical resistivity of the samples.

SEM micrograph reveals the uniform dispersion of the SiC particles in the Cu matrix element. The results revealed that the Hardness and tensile strength were improved due to the addition of SiC and were maximum for the samples sintered at 950 °C. The addition of SiC has also increased the electrical resistivity of the Cu-SiC composite and was lowest for Cu 100% while the relative density has shown the reverse trend. Further, it was found that the maximum hardness of 91.67 Hv and ultimate tensile strength of 312.93 MPa were found for Cu-20% SiC composite and the lowest electrical resistivity of 2.017 µ- Ω-cm was found for pure Cu sample sintered at 950 °C, and this temperature was concluded as the optimum sintering temperature.

The powder metallurgy route for the fabrication of the composites is a challenging task as the trapping of oxygen cannot be controlled during the compaction process as well as during the sintering process. So, a more intensive study is required to overcome these kinds of limitations.

As of the author’s best knowledge, no work has been reported on the effect of sintering temperature on the properties of the Cu-SiC composites which has huge potential in the industries.

Many town centres in England exhibit high retail property vacancies and require regeneration. Several alternatives for the replacement of town centre retail (TCR) have been suggested, one of which is healthcare. The healthcare sector in England is in distress, with the National Health Service (NHS) tackling extensive patient waiting lists, whilst operating from an ageing estate. This paper is an introductory study that uses seven carefully selected personalised surveys to raise academic awareness of the importance and potential of integrating healthcare into town centres and calls for large-scale research to establish the statistical validity of the reported observations.

This study is developed from an interpretative standpoint. Through semi-structured interviews with key stakeholders specific to retail-to-healthcare conversions, this study reports stakeholders' perspectives on opportunities and limitations for such conversions to give direction for large statistical research in the future.

All participants support the integration of healthcare into town centres and agreed that diagnostic services, mental health support and primary care services are appropriate for provision within town centres. The participants advocate large-scale change in town centres in England, with integrated healthcare co-located with complementary services to fit with wider regeneration plans. Participants prefer adaptation of existing buildings where technically feasible and emphasise the importance of obtaining the buy-in of other stakeholders whilst expressing concerns about the uncertainty of capital funding availability.

This is the first study to analyse the practice of retail-to-healthcare conversions in town centres. These are still rare in England and projects are complex. The market experience is limited, and thus, the literature is scarce. This study fills this void and provides a starting point for future quantitative research in this area and informs the new town-planning policies.

This paper aims to introduce International Digital Collaborative Autoethnographical Psychobiography (IDCAP).

This paper describes how IDCAP was developed to answer research questions about what it takes and what it means to recover from mental illness. During its development, IDCAP combined the diverse and intersectional experiences, knowledge and interests of an Anglo-Swedish research team with what could be found in different publications concerning the experiences and the mental illnesses of the musicians Syd Barrett, Peter Green and Brian Wilson.

IDCAP combines features of autoethnography and psychobiography to offer a novel qualitative research method.

Whilst IDCAP was created to focus on recovery from mental illness and musicians, it can be applied to other areas of research. It shares the same limitations as autoethnography and psychobiography, although some of the features of IDCAP may go some way to mitigate against these.

IDCAP is a novel research method that is offered to other researchers to develop and enhance further through application.

IDCAP is a collaborative research method that encourages the involvement of a wide range of researchers from different countries and cultures. It can be used to give voice to marginalised groups and to counter discrimination and prejudice. Recovery from mental illness is a topic of great personal and social value.

IDCAP is a novel research method that, to the best of the authors’ knowledge, has not been explicitly used before.