Search results

The purpose of this research is to provide a framework in which new data quality dimensions are defined. The new dimensions provide new metrics for the assessment of lecture video indexing. As lecture video indexing involves various steps, the proposed framework containing new dimensions, introduces new integrated approach for evaluating an indexing method or algorithm from the beginning to the end.

The emphasis in this study is on the fifth step of design science research methodology (DSRM), known as evaluation. That is, the methods that are developed in the field of lecture video indexing as an artifact, should be evaluated from different aspects. In this research, nine dimensions of data quality including accuracy, value-added, relevancy, completeness, appropriate amount of data, concise, consistency, interpretability and accessibility have been redefined based on previous studies and nominal group technique (NGT).

The proposed dimensions are implemented as new metrics to evaluate a newly developed lecture video indexing algorithm, LVTIA and numerical values have been obtained based on the proposed definitions for each dimension. In addition, the new dimensions are compared with each other in terms of various aspects. The comparison shows that each dimension that is used for assessing lecture video indexing, is able to reflect a different weakness or strength of an indexing method or algorithm.

Despite development of different methods for indexing lecture videos, the issue of data quality and its various dimensions have not been studied. Since data with low quality can affect the process of scientific lecture video indexing, the issue of data quality in this process requires special attention.

The purpose of this study is to investigate the effects of a pigment coating on the mechanical properties of fluting paper.

Two different calcium carbonate pigments were used in the preparation of the coated color, precipitated calcium carbonate (PCC) and ground calcium carbonate (GCC). Fluting paper produced by recycling waste paper was used as base paper. The effects of PCC and GCC pigments on mechanical properties were compared. Ring crush test (RCT), corrugating medium test (CMT), corrugating crush test (CCT), tensile and burst strength tests were applied to the coated papers, and the results were compared to the mechanical properties of base paper.

The tensile and burst indices of the coated papers were found to be higher than base papers about 13.9% and 6.05%, respectively. While the coating process positively affected the RCT and CCT values, it did not show a significant impact on the CMT values. GCC, one of the pigments used in coating colors, had a more effective effect on the mechanical properties of fluting papers compared to PCC.

These results suggest that coating of fluting papers has a positive effect on mechanical properties and the use of GCC as a pigment is more effective than PCC.

This study aims to examine the impact of using ChatGPT on the Halal tourism experience. It examines the relationships among Halal-friendly travel motivations and satisfaction, revisit intention and electronic word-of-mouth (e-WoM) while testing the moderating effect of ChatGPT on the relationship between satisfaction and revisit intention.

This study employed a quantitative methodology. Using purposive sampling techniques, it approached about 800 tourists (from November 2023 to January 2024) from several halal tourism destinations in Indonesia. A total of 395 usable surveys were analyzed to test the relationships and moderation effects by SEM.

The study indicates that Halal-friendly travel motivations positively impact Muslim tourist satisfaction, which in turn influences e-WoM and revisit intention. Importantly, ChatGPT significantly moderates the relationship between satisfaction and revisit intention, thereby strengthening tourist loyalty for those using the AI tool.

The study’s findings provide practical guidelines for halal tourism providers to enhance Halal-compliant services and incorporate ChatGPT as an AI tool to boost Muslim travelers’ satisfaction, drive e-WoM and increase revisit intentions. AI technology gives Halal tourism companies an advantage in offering customized, immediate support, which leads to Muslim visitors becoming loyal.

The study fills a significant gap in the Halal tourism literature by examining AI’s impact on the market. It expands the Expectation-Confirmation Theory (ECT), the push-pull theory and word-of-mouth models in Halal tourism. It also contributes to AI adoption in Halal tourism by addressing how modern AI tools can influence tourist behaviors, improve satisfaction and encourage repeat visits.

From 1979 to 2023, the takaful structure has been adopted in many jurisdictions, making the documenting of its early days of establishment relatively difficult and somewhat unreliable. This is unlike conventional insurance, where the history and legislation are well documented and archived in various research (Hellwege, 2016; Marano and Siri, 2017). The purpose of this paper is to provide a chronology for the establishment and development of takaful via the takaful establishment in each jurisdiction, documenting its first takaful operator and first takaful regulation.

This paper has used a qualitative method in the form of reviewing literature and available data such as journals, books and official resources. The data is thoroughly analysed in order to build the chronology for takaful. It adopted an exploratory research design, which is deemed suitable in situations where few works of literature have examined the subject (Neuman, 2014). The paper explores the establishment and non-establishment of takaful in 57 countries. The paper categorises the countries into seven regions starting with the GCC, Levant, Asia, Central Asia, Africa, Europe and Others.

The takaful chronology presented in this paper shows that takaful operations exist in 47 jurisdictions, starting from Sudan and the UAE in 1979, with the most recent adopters being Morocco and Iran in December 2021. It is found that 22 jurisdictions do not have takaful regulations, and the Takaful Act 1984, issued in Malaysia, is considered the first takaful regulation that sets the basis for other regulations that follow.

The paper contributes to the literature by providing a comprehensive chronology of takaful, especially as the few existing timelines have been found to be incomplete and consist of contradictory information.

This study aims to explore the most salient contributors to residents' support for tourism. As such, the authors measure residents' fear and risk of coronavirus disease 2019 (COVID-19) and residents' animosity towards tourists as predictors of attitudinal, intentional and behavioural support for tourism in China, Malaysia, Kazakhstan and Iran.

An online survey of 1,318 respondents across four countries was conducted, with data analysed using structural equation modelling.

This study shows that residents' perceptions about tourism development vary in different countries based on the impact of COVID-19, even though some factors, such as perceived risk and fear of COVID-19, have a similar effect on residents' attitudes and intentions to support tourism.

Only residents from four countries participated due to the collaborative effort of researchers from these specific countries.

Insight into residents' perceptions and responses to COVID-19 can aid policymakers and managers in developing effective crisis recovery strategies.

The data from this study can serve as a foundation for future research to examine residents' attitudes and support towards tourism during the post-COVID-19 period.

Unlocking the unrevealing of residents' perceptions and coping mechanisms towards tourists during the pandemic, this research shines a light on their crucial role in the revival of the tourism industry. With an exclusive focus on residents' attitudes and behaviours, this study stands out amongst the few that delve into this crucial aspect of post-pandemic recovery.

Material selection, driven by wide and often conflicting objectives, is an important, sometimes difficult problem in material engineering. In this context, multi-criteria decision-making (MCDM) methodologies are effective. An approach of MCDM is needed to cater to criteria of material assortment simultaneously. More firms are now concerned about increasing their productivity using mathematical tools. To occupy a gap in the previous literature this research recommends an integrated MCDM and mathematical Bi-objective model for the selection of material. In addition, by using the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS), the inherent ambiguities of decision-makers in paired evaluations are considered in this research. It goes on to construct a mathematical bi-objective model for determining the best item to purchase.

The entropy perspective is implemented in this paper to evaluate the weight parameters, while the TOPSIS technique is used to determine the best and worst intermediate pipe materials for automotive exhaust system. The intermediate pipes are used to join the components of the exhaust systems. The materials usually used to manufacture intermediate pipe are SUS 436LM, SUS 430, SUS 304, SUS 436L, SUH 409 L, SUS 441 L and SUS 439L. These seven materials are evaluated based on tensile strength (TS), hardness (H), elongation (E), yield strength (YS) and cost (C). A hybrid methodology combining entropy-based criteria weighting, with the TOPSIS for alternative ranking, is pursued to identify the optimal design material for an engineered application in this paper. This study aims to help while filling the information gap in selecting the most suitable material for use in the exhaust intermediate pipes. After that, the authors searched for and considered eight materials and evaluated them on the following five criteria: (1) TS, (2) YS, (3) H, (4) E and (5) C. The first two criteria have been chosen because they can have a lot of influence on the behavior of the exhaust intermediate pipes, on their performance and on the cost. In this structure, the weights of the criteria are calculated objectively through the entropy method in order to have an unbiased assessment. This essentially measures the quantity of information each criterion contribution, indicating the relative importance of these criteria better. Subsequently, the materials were ranked using the TOPSIS method in terms of their relative performance by measuring each material from an ideal solution to determine the best alternative. The results show that SUS 309, SUS 432L and SUS 436 LM are the first three materials that the exhaust intermediate pipe optimal design should consider.

The material matrix of the decision presented in Table 3 was normalized through Equation 5, as shown in Table 5, and the matrix was multiplied with weighting criteria ß_j. The obtained weighted normalized matrix V_ij is presented in Table 6. However, the ideal, worst and best value was ascertained by employing Equation 7. This study is based on the selection of material for the development of intermediate pipe using MCDM, and it involves four basic stages, i.e. method of translation criteria, screening process, method of ranking and search for methods. The selection was done through the TOPSIS method, and the criteria weight was obtained by the entropy method. The result showed that the top three materials are SUS 309, SUS 432L and SUS 436 LM, respectively. For the future work, it is suggested to select more alternatives and criteria. The comparison can also be done by using different MCDM techniques like and Choice Expressing Reality (ELECTRE), Decision-Making Trial and Evaluation Laboratory (DEMATEL) and Preference Ranking Organization Method for Enrichment Evaluation (PROMETHEE).

The results provide important conclusions for material selection in this targeted application, verifying the employment of mutual entropy-TOPSIS methodology for a series of difficult engineering decisions in material engineering concepts that combine superior capacity with better performance as well as cost-efficiency in various engineering design.

The initiative for sustainability in the construction industry has led to the innovative utilization of automobile tire waste, transforming it into value-added products, toward decarbonization in the construction industry, aligning with the development and sustainability goals of Al-Kharj Governorate. However, the disposal of these materials generates significant environmental concerns. As a payoff for these efforts, this study aims to contribute to a fruitful shift toward eco-friendly recycling techniques, particularly by studying the transformation of tire waste bead wires into recycled steel tire fibers (RSTFs) for sustainable concrete composites.

This research delves into how this technological transformation not only addresses environmental concerns but also propels sustainable tire innovation forward, presenting a promising solution for waste management and material efficiency in building materials. Recent studies have highlighted the superior tensile strength of RSTFs from discarded tires, making them suitable for various structural engineering applications. Recently, there has been a notable shift in research focus to the use of RSTFs as an alternative to traditional fibers in concrete. In this study, however, efforts have paid off in outlining a comprehensive assessment to investigate the viability and efficacy of repurposing tire bead wires into RSTFs for use in concrete composites, as reported in the literature.

This study examined the Saudi waste management, the geometrical properties of RSTFs, and their impact on the strength properties of concrete microstructure. It also examined the economic, cost, and environmental impacts of RSTFs on concrete composites, underscoring the need for the construction industry to adopt more sustainable and adaptable practices. Furthermore, the main findings of this study are proposed insights and a blueprint for the construction industry in Al-Kharj Governorate, calling for collective action from both public and private sectors, and the community to transform challenges into job opportunities for growth and sustainability.

This study pointed to thoroughly demonstrate the technological advancement in converting tire waste to reinforcing fibers by evaluating the effectiveness, environmental sustainability, and practicality of these fibers in eco-friendly concrete composites. Besides, the desired properties and standards for RSTFs to enhance the structural integrity of concrete composites are recommended, as is the need to establish protocols and further study into the long-term efficacy of RSTF-reinforced concrete composites.

Considering the direct impact of retailers' performance on the economy, this paper aimed to propose a comprehensive framework to evaluate the performance of different branches of a retailer.

Through a case study, the weights of indicators were calculated by the best-worst method (BWM) and the branches' performance was appraised using data envelopment analysis (DEA).

The branches were ranked in terms of performance, and sensitivity analysis and statistical tests were conducted to realize the weaknesses and strengths of the branches. Then, some strategies were proposed using strengths, weaknesses, opportunities and threats (SWOT) analysis to improve the performance of the weak branches.

This paper contributes to previous studies on the evaluation of retailers' performance by proposing a triple framework based on resilience, sustainability and sales-marketing indicators. This paper focused on branches' operations and branches' optimization by improving performance in terms of these three indicators. This paper also offers a qualitative and quantitative analysis of retailers' performance, which has received less attention in previous studies.

The purpose of this study is to examine the factors that affect managers’ ethical decision-making in export-oriented readymade garments in Bangladesh.

This is an empirical study based on the quantitative approach undertaking a cross-sectional survey method where a convenience sampling technique was applied. The analysis was done using partial least square structural equation model applying Smart-PLS version 3.0.

This study confirmed that all the components of cognitive appraisal processes, including perceived severity, perceived vulnerability, response efficacy and self-efficacy, have a significant influence on attitude. Attitude, in turn, mediates the relationship between these variables and the behavioural intention of ethical practice, except for perceived vulnerability. Besides, moral obligation is found to mediate the relationship between attitude, self-efficacy and the behavioural intention of ethical decision-making. The study also found that ethical climate and subjective norms have a direct influence on behavioural intention. Furthermore, behavioural intention, ethical climate and self-efficacy are positively related to actual decision-making behaviour. However, this study did not find any direct effect of subjective norms on moral obligation.

The organization should include an emphasis on building ethical culture and setting an ethical code of conduct within the organization to sustain ethical practice within employees. However, the practitioner should work on enhancing self-efficacy to curb unethical practices by individuals.

This research contributes to the management of garments manufacturers by a practical and theoretical understanding of what influences the ethical behavioural decision-making process. Valuable guidelines are provided on the ethical decision-making process in the garments manufacturing companies for future researchers.

This study aims to examine how employee empowerment (personal value and impact) influences the delivery of services quality (SQD). The study focused in particular on the mediating effects of organizational citizenship behavior (OCB) on the link between employee empowerment (EE), personal value, employee impact and SQD.

A total of 310 survey questionnaires were completed by the nursing employees working in the public hospitals in Nigeria. SEM-PLS was used to carry out the statistical analysis.

The findings of the study revealed that EE (personal value and employee impact) and OCB significantly affect SQD. The findings also indicate that OCB mediates the link between SQD and personal value, employee impact and SQD.

The results of this study shed light on the influence of employee personal value and impact and its influence on SQD. Public hospitals should therefore concentrate on recognizing, comprehending and implementing employee empowerment to improve employee nurses’ capacity to achieve higher SQD. Along with how the accepted hypotheses are confirmed, the implications of these findings for theory and practice are also discussed.

Even though SQD has become a well-developed theoretical concept, previous research has rarely addressed the framework suggested for the present study, particularly when it comes to health care. In the context of public health sector settings, this study may be the first to examine the mediating role of OCB between personal values, employee impact and SQD.