Search results

Corrosion thinning reduces the effective cross-sectional areas of steel structures and degrades their mechanical properties. This study aims to investigate the relationship between the corrosion thinning of carbon steel for transmission towers and the degradation of its mechanical properties.

A macroscopic finite element model of a transmission tower was established and then combined with the corrosion thinning and mechanical properties of Q355 steel in different test periods measured in neutral salt spray, SO₂ atmosphere and wet heat environments to conduct a finite element simulation of a transmission tower with different corrosion thinning of Q355 steel.

When the residual thickness of the tower leg angle was reduced to 4.03 mm, the maximum stress solved in the simulation exceeded the yield strength, with the tower already at risk of collapse owing to corrosion failure under extreme conditions of basic wind speed.

This study innovatively utilises transmission tower finite element models and experimental data from mechanical degradation experiments to quantify the relationship between corrosion thinning and the mechanical properties of Q355 steel, ensuring the effective assessment of the mechanical properties of corroded transmission towers.

Restaurant and foodservice workers who were formally “essential” throughout the global pandemic were disproportionately subjected to layoffs and furloughs, and are now slowly returning to the industry with expectations of equitable pay and benefits. Given the recent acceleration of the UN’s Sustainability Development Goals and its focus on decent work, the purpose of this study was to determine if restaurant consumers would be willing to pay for decent work that supported the social sustainability of restaurant workers.

Data were collected from 317 restaurant consumers during August 2023. Confirmatory factor analysis was used to validate the Decent Work Scale adapted for consumers. Structural equation modeling was employed to test the full behavioral model of decent work predicting willingness to pay, while bootstrapping was used to test the mediation.

The adapted Decent Work Scale for consumers strongly predicted their willingness to pay through a full mediation of Theory of Planned Behavior constructs (attitude, subjective norm, perceived behavioral control).

This study demonstrated that restaurant consumers were willing to pay for the decent work and social sustainability of restaurant workers. This study validated an adapted Decent Work Scale in the consumer context, whereas prior research utilizing the scale was of worker self-reports of decent work.

It is widely known that fast-fashion retailers are struggling to keep up with consumer attention for quick responses within the fashion industry. With the advance of Internet and e-commerce, consumers prefer to purchase online. Online platform information has become an essential source for exploring consumer attention. However, there is often a mismatch between the information provided by retailers and the feedback received from consumers, leading to an imbalance between the supply side and demand side of online information. The purpose of this study is therefore to provide a unified approach to discover consumer attention from the design topic aspect by revealing the information imbalance between supply side and demand side.

To address the issue of online information imbalance and discover consumer attention, this study proposed an approach that focuses on the design topic perspective. The design topic is a collection of design elements that represent a clothing-design feature more comprehensively and accurately compared to a single design element. The proposed approach begins with generating design topics through topic modeling based on online information provided by retailers on e-commerce platforms. Two indicators, influence degree and attention degree, are then used to quantify the intensity of supply information and consumer attention related to design topics. Finally, design topic strategy diagrams are constructed to reveal information imbalance and discover consumer attention.

The experimental case demonstrates the existence of information imbalance, indicating that the intensity of supply information and consumer attention from the perspective of design topics is not uniform, although both follow the Pareto principle. The results of consumer attention distribution with heavy power-law tails are consistent with current research findings. This further demonstrates that the proposed approach is capable of discovering consumer attention in the design topic strategy diagrams.

The issue of information imbalance between retailers and consumers poses a challenge in keeping up with customer attention. The proposed approach offers a practical solution by visually identifying the symptoms of information imbalance and discovering consumer attention through design topic strategy diagrams. This approach provides fast-fashion retailers with a valuable reference to seize market opportunities, improve product design and adjust marketing or management strategies.

This study proposes a novel approach to disclose the issue of information imbalance between supply side and demand side and therefore to discover consumer attention from the perspective of design topics. In addition, guidelines for applying the proposed approach for fast-fashion marketing and management are presented.

The purpose of this paper is to present numerical simulations for magnetohydrodynamics natural convection of a nanofluid flow inside a cavity with an H-shaped obstacle based on combining artificial neural network (ANN) with the finite element method (FEM), and predict the heat transfer rate and system entropy.

The enclosure is assumed to be inclined. Changing the inclination angle results in a different obstacle shape, which affects the buoyancy force. Hence, different configurations of the contours of the fluid flow, isotherms and the entropy of the system are obtained. The outer walls of the cavity as well as the central part of the obstacle are kept adiabatic. The left vertical portion of the hindrance is cooled, whereas the right vertical part of the obstacle is a heated wall. Using dimensionless variables allows obtaining a dimensionless version of the governing system of equations that is solved via the consistency FEM. The coupled problem of pressure and velocity is overcome via the Increment Pressure Correction Scheme, which is known for its accuracy and stability for similar simple problems. A numerical computation is performed across a broad range of the governing parameters. A total of 304 data sets were used in the development of an ANN model. That data set was conducted from the numerical simulations. The data set underwent optimization, with 70% sets used for training the model, 15% for validation and another 15% for the testing phase. The training of the network model used the Levenberg–Marquardt training algorithm.

From the numerical simulations, it is concluded that the H-shaped obstacle boosts heat transfer rate in comparison with the I-shaped case. Also, raising the value of the inclination angle improves the entropy of the system presented by the Bejen number. Furthermore, strength heat transfer rate is obtained via decreasing the Hartmann number while this decrease decays the values of the Bejen number for both positive and negative amounts of the nonlinear Boussinesq parameter. Slower velocity and a better heat transfer rate characterize nanofluid compared with pure fluid. Leveraging the capabilities of the ANN, the developed model adeptly forecasts the values of both the average Nusselt and Bejen numbers with a high degree of accuracy.

A novel fusion of FEM and ANN has been tailored to forecast the heat transfer rate and system entropy of MHD natural convective flow within an inclined cavity containing an H-shaped obstacle, amid various physical influences.

While cyberloafing has emerged as a prevalent issue in numerous workplaces, research on its consequences is still underdeveloped, highlighting a need for further exploration and analysis. Drawing upon the cognitive appraisal theory of emotion, this study investigates the influence of coworkers' cyberloafing on employees' workplace incivility, mediated by negative emotions and moderated by task interdependence.

In Study 1, the hypothesized research model was tested utilizing three-wave time-lagged survey data collected from 333 employees and their coworkers. In Study 2, an additional sample of 274 employees was surveyed. Data were analyzed using hierarchical regression analysis and the bootstrap method.

The results indicated that coworkers' cyberloafing positively influenced employees' workplace incivility, with this relationship mediated by negative emotions. Additionally, task interdependence was found to positively moderate both the direct relationship between coworkers' cyberloafing and negative emotions and the indirect path from coworkers' cyberloafing to employees' workplace incivility through negative emotions.

This study helps managers gain a deeper understanding of cyberloafing's effects, enabling them to manage and curb it more effectively.

Prior research has predominantly explored the effects of cyberloafing on its implementers. However, this study innovatively shifts focus to the observer perspective, empirically demonstrating whether and how coworkers' cyberloafing affects employees' workplace incivility, enriching and expanding the existing literature.

Cyberloafing is an organization-directed counterproductive work behavior (CWB). One stream of literature deems cyberloafing to be bad for organizations and their employees, while another suggests cyberloafing is a coping response to stressful work events. Our work contributes to the latter stream of literature. The key objective of our study is to examine whether cyberloafing could be a means to cope with a stressful work event-abusive supervision, and if yes, what mediating and boundary conditions are involved. For this investigation, the authors leveraged the Stressor-Emotion-CWB theory which posits that individuals engage in CWB to cope with the negative affect generated by the stressors and that this relationship is moderated at the first stage by personality traits.

Using a multi-wave survey design, the authors collected data from 357 employees working in an Indian IT firm. Results revealed support for three out of the four hypotheses.

Based on the Stressor-Emotion-CWB theory, the authors found that work-related negative affect fully mediated the positive relationship between abusive supervision and cyberloafing, and work locus of control (WLOC) moderated the positive relationship between abusive supervision and work-related negative affect. The authors did not find any evidence of a direct relationship between abusive supervision and cyberloafing. Also, the positive indirect relationship between abusive supervision and cyberloafing through work-related negative affect was moderated at the first stage by the WLOC such that the indirect effect was stronger (weaker) at high (low) levels of WLOC.

This work demonstrates that cyberloafing could be a way for employees to cope with their abusive supervisors.

The purpose of this research is to examine the relationship between coaching leadership and employees' taking charge while incorporating the mediating role of work meaningfulness and the moderating role of challenge-hindrance stressor.

A total of 355 pairs of effective samples were collected through a two-stage supervisor-subordinate paired survey. Four hypotheses were tested using hierarchal regression analysis and bootstrapping method.

The findings show that coaching leadership is positively related to taking charge, and work meaningfulness positively mediates the coaching leadership-taking charge relationship; high challenge stressors and high hindrance stressors weaken the positive effect of coaching leadership on work meaningfulness respectively; challenge stressors and hindrance stressors further moderate the indirect relationship of coaching leadership and taking charge through work meaningfulness.

This study provides a new perspective for organizations to activate employees' taking charge, thereby enriching the antecedents of taking charge. By incorporating challenge-hindrance stressor framework, this study also provides answers to when coaching leadership will be less effective.

This study aims to introduce a novel machine learning feature vector (MLFV) method to bring machine learning to overcome the time-consuming computational fluid dynamics (CFD) simulations for rapidly predicting turbulent flow characteristics with acceptable accuracy.

In this method, CFD snapshots are encoded in a tensor as the input training data. Then, the MLFV learns the relationship between data with a rod filter, which is named feature vector, to learn features by defining functions on it. To demonstrate the accuracy of the MLFV, this method is used to predict the velocity, temperature and turbulent kinetic energy fields of turbulent flow passing over an innovative nature-inspired Dolphin turbulator based on only ten CFD data.

The results indicate that MLFV and CFD contours alongside scatter plots have a good agreement between predicted and solved data with R² ≃ 1. Also, the error percentage contours and histograms reveal the high precisions of predictions with MAPE = 7.90E-02, 1.45E-02, 7.32E-02 and NRMSE = 1.30E-04, 1.61E-03, 4.54E-05 for prediction velocity, temperature, turbulent kinetic energy fields at Re = 20,000, respectively.

The method can have state-of-the-art applications in a wide range of CFD simulations with the ability to train based on small data, which is practical and logical regarding the number of required tests.

The paper introduces a novel, innovative and super-fast method named MLFV to address the time-consuming challenges associated with the traditional CFD approach to predict the physics of turbulent heat and fluid flow in real time with the superiority of training based on small data with acceptable accuracy.

Previous studies on housing affordability in China were concentrated in China’s coastal and central regions. The purpose of this paper is to investigate housing affordability of urban residents in Northwest China. Moreover, this paper attempts to understand the consistency and influencing factors of various indicators on the evaluation of housing affordability.

This paper uses multiyear data on house sales, residents’ incomes and living expenses from 2011 to 2022. House price-to-income ratio, housing affordability index and residual income approach were calculated by using these data and used as the measure of housing affordability.

The results show that there are obvious differences in the housing affordability among the Xi’an, Lanzhou and Yinchuan during 2011–2022, and the housing affordability of residents in cities with small population and economic scale is better. The ability of most urban residents to afford suitable housing is still poor, and the ability to afford small-sized housing is better. Most families with below-middle income have poor housing affordability. It is also observed that although various indicators had similarities in the evaluation of residents’ housing affordability, the comprehensive evaluation results of multiple indicators were more reliable.

The research results provide a basis for the decision-making of the government’s urban housing policy and improvement of residents’ housing conditions.

The results have a clear understanding of the housing affordability of urban residents in Northwest China. The study found that the geographical location and topography of the city is also a factor affecting the housing affordability.

This paper comprehensively addresses the influence of chopped strand mat glass fiber-reinforced polymer (GFRP) patch configurations such as geometry, dimensions, position and the number of layers of patches, whether a single or double patch is used and how well debonding the area under the patch improves the strength of the cracked aluminum plates with different crack lengths.

Single-edge cracked aluminum specimens of 150 mm in length and 50 mm in width were tested using the tensile test. The cracked aluminum specimens were then repaired using GFRP patches with various configurations. A three-dimensional (3D) finite element method (FEM) was adopted to simulate the repaired cracked aluminum plates using composite patches to obtain the stress intensity factor (SIF). The numerical modeling and validation of ABAQUS software and the contour integral method for SIF calculations provide a valuable tool for further investigation and design optimization.

The width of the GFRP patches affected the efficiency of the rehabilitated cracked aluminum plate. Increasing patch width WP from 5 mm to 15 mm increases the peak load by 9.7 and 17.5%, respectively, if compared with the specimen without the patch. The efficiency of the GFRP patch in reducing the SIF increased as the number of layers increased, i.e. the maximum load was enhanced by 5%.

This study assessed repairing metallic structures using the chopped strand mat GFRP. Furthermore, it demonstrated the superiority of rectangular patches over semicircular ones, along with the benefit of using double patches for out-of-plane bending prevention and it emphasizes the detrimental effect of defects in the bonding area between the patch and the cracked component. This underlines the importance of proper surface preparation and bonding techniques for successful repair.