Search results

The study aims to identify the areas of flood susceptibility and to categorize the Gangarampur sub-division into various flood susceptibility zones. It also aspires to evaluate the efficacy of integrating Geographic Information Systems (GIS) with Artificial Neural Networks (ANN) for flood susceptibility analysis.

The factors contributing to floods such as rainfall, geomorphology, geo-hazard, elevation, stream density, land use and land cover, slope, distance from roads, Normalized Difference Water Index (NDWI) and distance from rivers were analyzed for flood susceptibility analysis. The use of the ANN model helps to construct the flood susceptibility map of the study area. For validating the outcome, the Receiver Operating Characteristic (ROC) is employed.

The results indicated that proximity to rivers, rainfall deviation, land use and land cover are the most significant factors influencing flood occurrence in the study area. The ANN model demonstrated a prediction accuracy of 85%, validating its effectiveness for flood susceptibility analysis.

The research offers a novel approach by integrating Geographic Information Systems (GIS) with Artificial Neural Networks (ANN) for flood susceptibility analysis in the Gangarampur sub-division. By identifying key factors such as proximity to rivers, rainfall deviation and land use, the study achieves 85% prediction accuracy, showing the effectiveness of ANN in flood risk mapping. These findings provide critical insights for planners to devise targeted flood mitigation strategies.

This paper presents an experimental investigation in establishing the relationship between FDM process parameters and tensile strength of polycarbonate (PC) samples using the I-Optimal design.

I-optimal design methodology is used to plan the experiments by means of Minitab-17.1 software. Samples are manufactured using Stratsys FDM 400mc and tested as per ISO standards. Additionally, an artificial neural network model was developed and compared to the regression model in order to select an appropriate model for optimisation. Finally, the genetic algorithm (GA) solver is executed for improvement of tensile strength of FDM built PC components.

This study demonstrates that the selected process parameters (raster angle, raster to raster air gap, build orientation about Y axis and the number of contours) had significant effect on tensile strength with raster angle being the most influential factor. Increasing the build orientation about Y axis produced specimens with compact structures that resulted in improved fracture resistance.

The fitted regression model has a p-value less than 0.05 which suggests that the model terms significantly represent the tensile strength of PC samples. Further, from the normal probability plot it was found that the residuals follow a straight line, thus the developed model provides adequate predictions. Furthermore, from the validation runs, a close agreement between the predicted and actual values was seen along the reference line which further supports satisfactory model predictions.

This study successfully investigated the effects of the selected process parameters - raster angle, raster to raster air gap, build orientation about Y axis and the number of contours - on tensile strength of PC samples utilising the I-optimal design and ANOVA. In addition, for prediction of the part strength, regression and ANN models were developed. The selected ANN model was optimised using the GA-solver for determination of optimal parameter settings.

The proposed ANN-GA approach is more appropriate to establish the non-linear relationship between the selected process parameters and tensile strength. Further, the proposed ANN-GA methodology can assist in manufacture of various industrial products with Nylon, polyethylene terephthalate glycol (PETG) and PET as new 3DP materials.

This paper focuses on knowledge sharing in health care. The aim of the paper is to further understand how digital applications can facilitate knowledge sharing between different care providers and health-care professionals.

The paper is based on a qualitative action case study, performed as a formative intervention study as a Change Laboratory, where a digital application concerning wound support was used. The Change Laboratory was used for knowledge sharing in the assessment and treatment process of wounds. The collected data was then thematically analyzed.

The findings show how digital applications can facilitate knowledge sharing, but also the need for complementary collaborative sessions. The main contribution is the rich description of how digital applications together with these sessions can facilitate knowledge sharing.

This paper shows that activities as collaborative sessions performed on the organizational level prove to support knowledge sharing and learning when a new digital application has been implemented in the work process. It also shows that these sessions contributed to identifying new knowledge that has potential for being included in the application and hence are important to keeping the application updated and relevant over time.

This study aims to explore the management learning during a long-term crisis like a pandemic. The paper addresses both what health-care managers have learnt during the COVID-19 pandemic and how the management learning is characterized.

The paper is based on a qualitative case study carried out during the COVID-19 pandemic at two different public hospitals in Sweden. The study, conducted with semi-structured interviews, applies a combination of within-case analysis and cross-case comparison. The data were analyzed using thematic deductive analysis with the themes, i.e. sensemaking, decision-making and meaning-making.

The COVID-19 pandemic was characterized by uncertainty and a need for continuous learning among the managers at the case hospitals. The learning process that arose was circular in nature, wherein trust played a crucial role in facilitating the flow of information and enabling the managers to get a good sense of the situation. This, in turn, allowed the managers to make decisions meaningful for the organization, which improved the trust for the managers. This circular process was iterated with higher frequency than usual and was a prerequisite for the managers’ learning. The practical implications are that a combined management with hierarchical and distributed management that uses the normal decision routes seems to be the most successful management method in a prolonged crisis as a pandemic.

The gained knowledge can benefit hospital organizations, be used in crisis education and to develop regional contingency plans for pandemics.

This study has explored learning during the COVID-19 pandemic and found a circular process, “the management learning wheel,” which supports management learning in prolonged crises.

Purpose: In Greece, large companies have started to focus more and more on corporate social responsibility (CSR) and ESG (environmental, social, and governance) activities, realising the importance of sustainability and social responsibility beyond traditional profits. Using machine-learning (ML) methods and artificial neural networks (ANNs) can enhance the process of measuring performance in these areas in several ways, including data analytics. This paper investigates and explores the correlation between CSR and ESG actions with financial and non-financial factors for the 100 largest companies operating in Greece.

Methodology: The study runs from January 2019 until December 2021, and ANNs and ML techniques are employed. The comparison concerns both the control variables and the predictability of the methods.

Findings: The main findings that emerged are the confirmation of the correlation between CSR and ESG actions and the financial performance and determinants of corporate responsibility of the companies in the sample. Moreover, good results were obtained for almost all of the techniques examined, but the superiority of deep learning models and gradient-boosted trees (GBTs) was found for the selected variables.

Significance/Implications/Conclusions: The findings suggest that using ML techniques and neural networks to measure CSR actions can help companies evaluate their performance and make effective decisions to improve their sustainability. It can also be a valuable tool for institutional investors, banks, and regulators.

Future Research: We believe that future research should focus on improving these models, exploring hybrid approaches that combine the strengths of different techniques, and expanding the range of variables considered.

This paper presents the findings from the assessment of the determinants of cloud computing (CC) deployment by construction organisations. Using the technology-organisation-environment (TOE) framework, the study strives to improve construction organisations' project delivery and digital transformation by adopting beneficial technologies like CC.

This study adopted a post-positivism philosophical stance using a deductive approach with a questionnaire administered to construction organisations in South Africa. The data gathered were analysed using descriptive and inferential statistics. Also, the fusion of structural equation modelling (SEM) and machine learning (ML) regression models helped to gain a robust understanding of the key determinants of using CC.

The study found that the use of CC by construction organisations in South Africa is still slow. SEM indicated that this slow usage is influenced by six technology and environmental factors, namely (1) cost-effectiveness, (2) availability, (3) compatibility, (4) client demand, (5) competitors' pressure and (6) trust in cloud service providers. ML models developed affirmed that these variables have high predictive power. However, sensitivity analysis revealed that the availability of CC and CC's ancillary technologies and the pressure from competitors are the most important predictors of CC usage in construction organisations.

The paper offers a theoretical backdrop for future works on CC in construction, particularly in developing countries where such a study has not been explored.

The purpose of this paper is to investigate the benefit of critical success factors (CSFs) clustering in different phases of make-to-order (MTO) projects and develop standards for management.

This study is based on a questionnaire survey. First of all, collecting data by structured interviews, relying on a questionnaire and second from leader contractors who are active in the engineering and steel industry (in Iran). So, the requirements and objective of the research are presented to the top management of MTO projects to gain their support in data collection. Then 20 CSFs were identified by the literature review so a questionnaire survey was prepared for the CSFs assessment and interview with the experts. Finally analyzing the importance and performance of CSFs in project phases and cluster them in different project phases with self-organizing map as one of the artificial neural network (ANN) approaches due to high predictive accuracy. Review the research result with the top management of MTO project and examine the results obtained from neural networks and validation indices.

Cluster analysis shows that the implementation phase is the most important stage in MTO organizations and the other phases like feasibility and start-up, design and planning, delivery and end-phase should be also considered as effective phases in determining the level of organization performance. Different industries with additional data at different periodic times will verify the result. Furthermore, testing the other ANN model will improve risk analysis and could shift this classification approach to a regression type.

The main limitation of the research is related to the sample. Research findings are limited to the time of data collection so validity is limited to the mentioned time. Different industries with additional data will verify the result. Furthermore, testing different ANN models such as K-MEANS, non-negative matrix factorization (NMF) analyses will improve risk analysis and could meet different classification results to find gaps.

In this paper, CSF and project phase dimensions are viewed together which is necessary to meet better results for simplifying social and economic benefits. Merge the new findings and latest technologies could prepare the best results and enable managers to create a better framework or implement key factors for minimizing waste.

This paper moves the definition of MTO organizations beyond measuring cost, complexity and financial variables by clustering CSFs in different phases of projects. So, the results enable managers to use this concept in their daily production to minimize waste and could be implemented to efficiently choose factors.