Search results

To improve the speed and accuracy of turbine blade film cooling design process, the most advanced deep learning models were introduced into this study to investigate the most suitable define for prediction work. This paper aims to create a generative surrogate model that can be applied on multi-objective optimization problems.

The latest backbone in the field of computer vision (Swin-Transformer, 2021) was introduced and improved as the surrogate function for prediction of the multi-physics field distribution (film cooling effectiveness, pressure, density and velocity). The basic samples were generated by Latin hypercube sampling method and the numerical method adopt for the calculation was validated experimentally at first. The training and testing samples were calculated at experimental conditions. At last, the surrogate model predicted results were verified by experiment in a linear cascade.

The results indicated that comparing with the Multi-Scale Pix2Pix Model, the Swin-Transformer U-Net model presented higher accuracy and computing speed on the prediction of contour results. The computation time for each step of the Swin-Transformer U-Net model is one-third of the original model, especially in the case of multi-physics field prediction. The correlation index reached more than 99.2% and the first-order error was lower than 0.3% for multi-physics field. The predictions of the data-driven surrogate model are consistent with the predictions of the computational fluid dynamics results, and both are very close to the experimental results. The application of the Swin-Transformer model on enlarging the different structure samples will reduce the cost of numerical calculations as well as experiments.

The number of U-Net layers and sample scales has a proper relationship according to equation (8). Too many layers of U-Net will lead to unnecessary nonlinear variation, whereas too few layers will lead to insufficient feature extraction. In the case of Swin-Transformer U-Net model, incorrect number of U-Net layer will reduce the prediction accuracy. The multi-scale Pix2Pix model owns higher accuracy in predicting a single physical field, but the calculation speed is too slow. The Swin-Transformer model is fast in prediction and training (nearly three times faster than multi Pix2Pix model), but the predicted contours have more noise. The neural network predicted results and numerical calculations are consistent with the experimental distribution.

This paper creates a generative surrogate model that can be applied on multi-objective optimization problems. The generative adversarial networks using new backbone is chosen to adjust the output from single contour to multi-physics fields, which will generate more results simultaneously than traditional surrogate models and reduce the time-cost. And it is more applicable to multi-objective spatial optimization algorithms. The Swin-Transformer surrogate model is three times faster to computation speed than the Multi Pix2Pix model. In the prediction results of multi-physics fields, the prediction results of the Swin-Transformer model are more accurate.

Progress in theory building in the field of collaborative networks in manufacturing is preponderantly seen in contributions from disciplines outside manufacturing science. Interdisciplinary research is one way of accelerating the development of appropriate theory for this emerging domain where industrial practice has moved beyond the state of the art of scientific knowledge for establishing workable, competitive solutions. The purpose of this paper is to examine to what extent interdisciplinary research has contributed to a better understanding of collaborative (manufacturing) networks.

To find out more about provenances of on‐going studies, to identify clusters of contributions and to provide direction for future work of researchers in this domain, publications of the past 22 years have been evaluated. To retrieve these contributions, a structured literature review has been undertaken by applying keywords to selected databases and using a strictly defined stepwise procedure. In total, 202 publications of all kinds have been evaluated.

From the analysis of the results, it appears that most interdisciplinary contributions to collaborative (manufacturing) networks rely on one original outside discipline for either developing solutions or advancing theoretical insight. Consequently, and after further analysis, it seems that researchers in collaborative networks hardly resort to multi‐disciplinary approaches, unless “natural”; further advances might arrive from stimulating these multi‐disciplinary avenues rather than sticking to more mono‐disciplinary, and less risky, takes on both applications and theoretical insight. A more detailed investigation of the value of contributions reveals that efforts to make interdisciplinary advances are either difficult or limited. Also, the findings indicate that researchers tend to follow a more “technical” approach to decision making by actors in networks rather than searching for a shift in paradigm.

While setting out these directions for future research and guiding research, this first‐of‐its‐kind review introduces the collaboration model as a systematic approach to collaborative (manufacturing) networks. This model might serve as a reference model to integrate disciplines for addressing the characteristics of Collaborative Networks. Its use in the review led to the finding that typical traits of networks, such as changeability, supplementary assets and decentralisation of decision making, are under‐researched.

The paper aims to present a framework for integrating the concepts of business continuity and business resilience with the aim of developing a concept of always-on business.

Literature review, conceptual and case-based.

A conceptual model for integrated “always-on business” solution based on continuous comouting technologies, business continuity, disaster recovery, IT/business resilience and several organational frameworks.

Presented framework can be used for integrating business continuity and business resilience in modern digital age; and transforming business systems into “always-on business”.

The purpose of this study is to explore how to select a suitable supply chain collaboration paradigm (SCCP) based on the intelligent manufacturing model (IMM) of enterprises.

Given the fit between internal collaboration and external collaboration, we propose a model to select a suitable SCCP based on two-sided matching between SCCPs and IMMs. In this decision problem, we invited five university scholars and seven related consultants to evaluate SCCPs and IMMs based on the regret theory, which is used to obtain the perceived utility and matching results. The evaluation values are comfortably expressed through probabilistic linguistic term sets (PLTSs). Also, we set the lowest acceptance threshold to improve the accuracy of matching results.

The findings indicate that the characteristics of IMMs can significantly influence the selection of SCCPs, and an SCCP is not suitable for all IMMs. Interestingly, the study findings suggest that the selection of SCCP is diverse and multi-optional under the constraints of IMMs.

Existing studies have explored supply chain collaboration (SCC) in Industry 4.0 to improve supply chain performance, but less attention has been paid to the impact of the match between SCCPs and IMMs on supply chain performance. And even fewer studies have addressed how to select a suitable SCCP in different IMMs. This study provides a unique contribution to the practice of SCC and expands the understanding of supply chain management in Industry 4.0.

In the aftermath of the global economic crisis, the pursuit of new perspectives and different growth models is imperative. One of the most significant trends of our time is the rise of Asia in the world economy. After centuries of Western economic dominance, China, India, and the rest of the East, alongside emerging economies more broadly, are beginning to challenge the West for positions of global industry leadership and underlying managerial philosophies and perspectives. In this paper, I review some key philosophical insights from Asia that have underpinned the success of many Asian businesses for generations, hoping that it will encourage more efforts – conceptually, theoretically, and empirically – leading the discourse on fresh new perspectives on business in emerging economies in general, and on Asian management in particular.

The purpose of this paper is to illustrate that some enterprise unions in South China, as strategic labor actors, made local progress in collective bargaining, but further elaborates on why gainful bargaining would require a more systematic understanding of the prevailing industrial structure.

This paper is mainly drawn from intensive site visits and 51 in-depth interviews in 2013 and 2014, and several follow-ups up to 2018. Three cases of collective bargaining, featuring different union strategies of assertive negotiation, informal cooperation and direct confrontation, are discussed in detail.

The study illustrates that viable collective bargaining with worker-supported unions is possible in China. However, the effectiveness of bargaining does not count on this alone; the supply chain structure also imposes significant constraints, mainly by narrowing the bargaining scope of each supplier and differentiating the structural power of their unions. In these cases, institutionalized union coordination beyond individual suppliers is proposed.

These cases began as post-strike bargaining in Japanese auto supply chains and became the frontier of industrial relations in China. The impact of the supply chain in different sectors or regions requires further study.

This paper draws attention to the effect of an “invisible” but increasingly significant factor, industrial structure, on enterprise-level collective bargaining in China, unlike many previous criticisms of unwillingness or incompetence among labor actors.

The purpose of this paper is to develop, extend and propose an improved proportional integral derivative (PID) rate control of a quadrotor unmanned aerial vehicle based on a convexity-based surrogated firefly algorithm.

An improved PID controller structure is proposed for the rate dynamics of the quadrotor. Optimality of the controller is ensured by a recent, simple yet efficient firefly optimization method. The hybrid structure is further enhanced with a convexity-based surrogated model function.

Monte Carlo, transient response, error metrics and histogram distribution analyzes are conducted to show the performance of the proposed controller. The performance of the proposed method is evaluated under various convex combination values to further investigate the effect of the proposed surrogated model. According to the results, the proposed method is capable of controlling the rate quadrotor dynamics with the steady-state error of 0.0023 (rad/s) for P, −0.0024 (rad/s) for Q and 0 (rad/s) for the R state, respectively. Also, the least mean objective value is achieved at = 0 value of convexity in Monte Carlo trials.

The originality of this paper is to propose an improved PID rate controller with a convexity-based surrogated firefly algorithm.

Cloud manufacturing (CMfg) has emerged as a service-oriented paradigm that enables modularization and on-demand servitization of resources in the context of manufacturing. The plethora of studies on CMfg has led the authors to investigate its implementation, as most of the literature is theoretical or simulation-based. Therefore, the purpose of this study is to investigate the reality of the CMfg concept in terms of adoption.

A tri-theoretic model is developed using the technology adoption model, diffusion of innovation and technology-organization-environment for hypotheses development. Data are collected from 218 US manufacturers. The data analysis approaches are partial least squares structural equation modeling, while data visualization is done to further analysis.

The study shows that most of the US manufacturers are reluctant to adopt the CMfg. Further, the statistical findings imply that competitive pressure, top management support, compatibility and trialability play a vital role in its adoption. The success of the CMfg adoption relies on the implementation of the pre-installation stage and the top management decisions.

For practitioners, the study provides insight on how to supervise the CMfg platform implementation to improve the adoption process. For researchers and academicians, the significance of trialability provides a wide range of research topics on developing the CMfg trials and models.

This paper highlights the concerns of manufacturers about the pros and cons of the CMfg adoption, as this topic has not been given due attention in the literature. This will help to align future research directions according to market concerns and mitigating the factors that are hindering its adoption.

The development of regional public brands for agricultural products necessitates compelling narratives that resonate deeply with consumers. Given the distinctiveness of agricultural products, consumers prioritize the inherent connection to roots and heritage when making purchasing decisions. Therefore, crafting brand narratives must emphasize this root appeal, namely, consumers’ information appeal preference, to positively influence consumers’ brand perceptions and underscore the value of regional public brands. This study investigates this phenomenon through the lens of cue utilization theory.

Four experiments were conducted for this purpose. Study 1 examined the stimulus materials for brand story type (typical vs atypical). The purpose of study 2 was to verify whether the experimental material could be used to categorize participants' information appeal preferences (geographic vs cultural). Study 3 employed a between-subjects design with a 2 (brand story: typical vs atypical) × 2 (consumers’ information appeal preferences: cultural vs geographic) factorial design. Study 4 used a between-subjects design of 2 (brand story: typical and atypical) × 2 (consumers’ information appeal preferences: cultural vs geographic) × 2 (culturally derived power perception: individual and social).

The findings indicated that the type of brand story and consumers’ information appeal preferences interact with consumers’ brand attitudes toward regional public brands for agricultural products. In addition, a sense of place was found to mediate the interaction between the type of brand story and consumers’ information appeal preferences. Furthermore, culturally derived power perceptions moderated this mechanism.

This study offers valuable insights into marketing regional public brands for agricultural products by categorizing their brand stories into typical and non-typical narratives.

The increasing demands for customized services and frequent market variations have posed challenges to managing and controlling the manufacturing processes. Despite the developments in literature in this area, less consideration has been devoted to the growth of business social networks, cloud computing, industrial Internet of things and intelligent production systems. This study recognizes the primary factors and their implications for intelligent production systems' success. In summary, the role of cloud computing, business social network and the industrial Internet of things on intelligent production systems success has been tested.

Intelligent production systems are manufacturing systems capable of integrating the abilities of humans, machines and processes to lead the desired manufacturing goals. Therefore, identifying the factors affecting the success of the implementation of these systems is necessary and vital. On the other hand, cloud computing and the industrial Internet of things have been highly investigated and employed in several domains lately. Therefore, the impact of these two factors on the success of implementing intelligent production systems is examined. The study is descriptive, original and survey-based, depending on the nature of the application, its target and the data collection method. Also, the introduced model and the information collected were analyzed using SMART PLS. Validity has been investigated through AVE and divergent validity. The reliability of the study has been checked out through Cronbach alpha and composite reliability obtained at the standard level for the variables. In addition, the hypotheses were measured by the path coefficients and R², T-Value and GOF.

The study identified three variables and 19 sub-indicators from the literature associated that impact improved smart production systems. The results showed that the proposed model could describe 69.5% of the intelligence production systems' success variance. The results indicated that business social networks, cloud computing and the industrial Internet of things affect intelligent production systems. They can provide a novel procedure for intelligent comprehensions and connections, on-demand utilization and effective resource sharing.

Study limitations are as below. First, this study ignores the interrelationships among the success of cloud computing, business social networks, Internet of things and smart production systems. Future studies can consider it. Second, we only focused on three variables. Future investigations may focus on other variables subjected to the contexts. Ultimately, there are fewer experimental investigations on the impact of underlying business social networks, cloud computing and the Internet of things on intelligent production systems' success.

The research and analysis outcomes are considered from various perspectives on the capacity of the new elements of Industry 4.0 for the manufacturing sector. It proposes a model for the integration of these elements. Also, original and appropriate guidelines are given for intelligent production systems investigators and professionals' designers in industry domains.