Search results

This paper aims to review the effects of home regulatory institutions on outward foreign direct investment (OFDI) in the context of China and discuss the extent to which they can be extended to other emerging markets. The authors especially compare these empirical studies with theoretical discussions in each category, identify research gaps and suggest future research ideas. Practical implications are discussed.

It focuses specifically on three categories of regulatory institutions, including overall institutional development, liberalization of OFDI policies and state ownership (and its closely approximate forms). Using a systematic review, this paper has reviewed 26 empirical studies (23 quantitative and 3 qualitative studies) published in peer-reviewed journals.

These studies suggest that overall institutional development toward a market economy in general leads to increased OFDI, but this effect is contingent on the stage of such development and the capabilities of Chinese multinationals. Liberalized and supportive OFDI policies also facilitate OFDI activities but only into selective areas. Findings on state ownership have been mixed.

This review offers a full picture of empirical evidence on how multiple levels of regulatory institutions affect OFDI from China. In this way, the authors can identify the research gaps between theoretical discussions on home institutions and OFDI and empirical evidence. Thus, they make suggestions for future directions of studies.

This study aims to realize the multipurpose use of inorganic materials in adsorption treatment of pigment wastewater and preparation of core-modified Color Index Pigment Red 57:1 (C.I. Pigment Red 57:1, PR 57:1).

In this paper, the inorganic materials (sepiolite and SiO₂·nH₂O) were used in both PR 57:1 production wastewater treatment and its core-modification. The inorganic material firstly adsorbed 3-hydroxy-2-naphthoic acid (bon acid) in the pigment wastewater to reduce chemical oxygen demand. Then, the inorganic material adsorbed with bon acid was reused to prepare core-modified PR 57:1.

In the pigment wastewater adsorption experiment, it was found that under pH = 3, the adsorption percentage of bon acid by inorganic material can reached up to 46.00%. The pigment characterization results showed that the core-modified PR 57:1 had a core-shell structure. Under UV light irradiation for 1 h, the core-modified PR 57:1 prepared with sepiolite and SiO₂·nH₂O showed total color difference ΔE value of 1.43 and 2.05, respectively, which was lower than that of unmodified PR 57:1 (ΔE = 2.89). In addition, the transmittance of pigment water suspension test results showed that the core-modified PR 57:1 showed better water dispersibility.

This paper attempts to develop a synergistic strategy based on the multipurpose use of inorganic materials in adsorption treatment of pigment wastewater and preparation of core-modified PR 57:1.

Collaboration is significant but difficult for the development of youth organizations, this research aims to explore whether the online collaboration process is suitable for youth organizations' collaboration and improve their effectiveness and efficiency.

This research has applied a design approach using the collaboration engineering method, to design an online collaboration process for youth organizations to improve their effectiveness and efficiency. Using a self-developed group support systems (GSS) tool, the authors have tested the new collaboration process through an experiment among four youth organizations and conducted a survey afterwards.

The new process improves the collaboration effectiveness and efficiency. The research also identifies the detailed relationships among influencing factors in the online collaboration process.

There is little research in the context of computer mediated youth organization collaboration. This research designs an online collaboration process for the effective and efficient collaboration of youth organizations and has it tested among representative youth organizations, providing practical instructions for digital youth organization collaboration in the context of global pandemic.

This paper aims to design a composite, aiming to improve the static puncture resistance through polyurethane impregnated treatment with five concentration gradients.

The relationship between polyurethane concentration, the number of polyester nonwovens, component fiber type (filament or staple) and the static puncture resistance is explored respectively and elaborately.

This study provides a new perspective to design flexible composites with better static puncture resistance, feasible preparation process as well as low cost.

The results show that the static puncture resistance of nonwovens impregnated by polyurethane is improved obviously. Meanwhile the puncture strength-T of nonwovens increases first and then decreases with the increase of the number of layers, and the maximum puncture strength-T is found at 20 layers. Moreover, the composite with filaments illustrates better mechanical resistance.

In this paper, a new flexible piezoresistive pressure sensor which uses non-woven fabric as the flexible substrate and sliver nanowires (AgNWs) as the conductive materials was reported.

The compression test of the pressure sensors was carried out at different compression frequencies and found that the sensors had more than 5,000 times reusability at high frequency.

When pressure sensors were applied to different parts of the human body, such as fingers, elbows, knees and throat, the sensors respond differently to different degrees of movement.

The proposed pressure sensor has broad application prospects in the human motion detection.

The screw extruder is applied in cement-three-dimensional (3D) printing. The cement paste flow in 3D printing is the typical Herschel–Bulkley fluid. To understand the flow in the channel, the improved lattice Boltzmann method (LBM) is proposed.

For Herschel–Bulkley flow, an improved LBM is presented to avoid the poor stability and accuracy. The non-Newtonian effect is regard as a special forcing term. The Poiseuille flow is taken to discuss the detailed process of the method. With the method, the analytical solution and numerical solution are obtained and compared. Then, the effect of the initial yield stress on the numerical solution is both explored by the shear-thickening fluid and the shear-thinning fluid. Moreover, the variations of the relative errors under different lattice nodes and different power-law indexes are analyzed. Finally, the method is applied into the simulation of the flow in the extruder of cement-3D printing.

The results show that the improved method is effective for Herschel–Bulkley fluids, which can simulate the flow in the extruder stably and accurately.

The simulation can contribute to understand the cement paste flow in the screw extruder, which helps to optimize the structure of the extruder in the following periods.

The improve method provide a new way to analyze the flow in the extruder of cement-3D printing. Also, in the past research, LBM for Herschel–Bulkley fluid is ignored, whereas the study can provide the reference for the numerical simulation.

Taking a dynamic endogenous perspective, this study aims to examine neglected endogeneity issues in the relationship between corporate social responsibility (CSR) and brand value and the relationship’s moderation by corporate governance.

The study uses the three-stage least squares (3SLS) method on 990 samples of the 110 most valuable listed companies published by the World Brand Lab for 2013–2021 to empirically test the two-way interactive endogenous relationship between CSR and brand value.

The findings reveal that increasing investment in CSR increases brand value in the current period, which prompts companies to reduce investment in social responsibility, resulting in a decline in future brand value. Concerning the moderating effect of corporate governance variables, the size of the board of directors and the board’s proportion of independent directors positively regulate the relationship between CSR and brand value. By contrast, the proportion of executive shareholdings has a negative impact.

This study’s findings complement previous studies on endogeneity in the relationship between CSR and brand value, and enrich the literature on corporate governance, CSR and brand value as a whole. In addition, the study uses the 3SLS method, which avoids endogeneity problems and eliminates the one-sidedness of the subjective selection of instrumental variables.

To combine the forecasting by single method using influence information fully, other than regular combined methods only focusing on historical forecasting errors.

To combine the single methods based on the analysis of improved gray correlation, with more related information being considered to enhance the price forecasting precision, such as the trend of the prices, the historical forecasting errors, and the temporal influence factors on prices.

A case of PJM market of USA shows that the proposed method has better performance than any other combined methods, and all single models as well.

The combined performance depends on the forecasting precision of single methods, and the correlation between the single methods, as well as the number of single method that to be combined.

It is a novel idea for combined method to forecasting the time series data, such as electricity prices, electric power loads.

The proposed method considers all the following factors: the similarity between the trends of the single forecasting, the errors of the single models and the temporal influence.

The purpose of this paper is to examine the quality of voluntary intellectual capital (IC) by universities in New Zealand, Australia, and the UK.

An IC framework was developed to measure IC reporting in the university sector. Content analysis was used to analyse the 2011 annual reports before a three-year comparative analysis of 90 universities (eight New Zealand universities, 38 Australian universities, and 44 UK universities) was undertaken.

New Zealand and Australian universities outperformed the UK universities in terms of IC disclosures. Additionally, the study found moderate increases in the levels of IC disclosures over the period of the study. The quality of IC disclosures by New Zealand universities was generally higher than their Australian and UK counterparts. Internal capital and human capital were the most disclosed categories with external capital being the least frequently disclosed in all three countries. However, the quality of external capital disclosures was higher than internal and human capital. Finally, most IC disclosures were narrative in nature.

The framework developed in this study could be adapted, further enhanced, and then applied to exploring IC disclosures in higher educational institutes in other jurisdictions.

This is the first comparative analysis of IC disclosures made by universities in three countries.

This study explores how chatbot gender and symbolic service recovery may improve the satisfaction of angry customers in the context of service failures. It provides a strategy for companies to deploy chatbots effectively in customer anger.

This research relies upon a systematic literature review to propose three hypotheses, and we recruit 826 participants to examine the effect of chatbot gender on angry customers through one lab study and one field study.

This research shows that female chatbots are more likely to increase the satisfaction of angry customers than male chatbots in service failure scenarios. In addition, symbolic recovery (apology vs. appreciation) moderates the effect of chatbot gender on angry customers. Specifically, male (vs. female) chatbots are more effective in increasing the satisfaction of angry customers when using the apology method, whereas female (vs. male) chatbots are more effective when using the appreciation method.

The rapid advancements in artificial intelligence technology have significantly enhanced the effectiveness of chatbots as virtual agents in the field of interactive marketing. Previous research has concluded that chatbots can reduce negative customer feedback following a service failure. However, these studies have primarily focused on the level of chatbot anthropomorphism and the design of conversational texts, rather than the gender of chatbots. Therefore, this study aims to bridge that gap by examining the effect of chatbot gender on customer feedback, specifically focusing on angry customers following service failures.