Search results

The purpose of this study is to present the state of the art for fiber Bragg grating (FBG) acceleration sensing technologies from two aspects: the principle of the measurement dimension and the principle of the sensing configuration. Some commercial sensors have also been introduced and future work in this field has also been discussed. This paper could provide an important reference for the research community.

This review is to present the state of the art for FBG acceleration sensing technologies from two aspects: the principle of the measurement dimension (one-dimension and multi-dimension) and the principle of the sensing configuration (beam type, radial vibration type, axial vibration type and other composite structures).

The current research on developing FBG acceleration sensors is mainly focused on the sensing method, the construction and design of the elastic structure and the design of a new information detection method. This paper hypothesizes that in the future, the following research trends will be strengthened: common single-mode fiber grating of the low cost and high utilization rate; high sensitivity and strength special fiber grating; multi-core fiber grating for measuring single-parameter multi-dimensional information or multi-parameter information; demodulating equipment of low cost, small volume and high sampling frequency.

The principle of the measurement dimension and principle of the sensing configuration for FBG acceleration sensors have been introduced, which could provide an important reference for the research community.

Centrifugal model tests can accelerate the characterization of landslides and demonstrate the form of slope failure, which is an important measure to research its instability mechanisms. Simply observing the slope landslide before and after a centrifugal model test cannot reveal the processes involved in real-time deformation. Electromagnetic sensors have severed as an existing method for real-time measurement, however, this approach has significant challenges, including poor signal quality, interference, and complex implementation and wiring schemes. This paper aims to overcome the shortcomings of the existing measurement methods.

This work uses the advantages of fiber Bragg grating (FBG) sensors with their small form-factor and potential for series multiplexing in a single fiber to demonstrate a monitoring strategy for model centrifugal tests. A slope surface deformation displacement sensor, FBG anchor sensor and FBG anti-slide piling sensor have been designed. These sensors are installed in the slope models, while centrifugal acceleration tests under 100 g are carried out.

FBG sensors obtain three types of deformation information, demonstrating the feasibility and validity of this measurement strategy.

The experimental results provide important details about instability mechanisms of a slope, which has great significance in research on slope model monitoring techniques and slope stability.

The purpose of this paper is to present the latest sensing structure designs and principles of information detection of fiber Bragg grating (FBG) displacement sensors. Research advance and the future work in this field have been described, with the background that displacement and deformation measurements are universal and crucial for structural health monitoring.

This paper analyzes and summarizes the existing FBG displacement sensing technologies from two aspects principle of information detection (wavelength detection, spectral bandwidth detection, light intensity detection, among others) and principle of the sensing elastomer structure design (cantilever beam type, spring type, elastic ring type and other composite structures).

The current research on developing FBG displacement sensors is mainly focused on the sensing method, the construction and design of the elastic structure and the design of new information detection method. The authors hypothesize that the following research trends will be strengthened in future: temperature compensation technology for FBG displacement sensors based on wavelength detection; a study of more diverse elastic structures; and fiber gratings manufactured with special fibers will greatly improve the performance of sensors.

The latest sensing structure designs and principles of information detection of FBG displacement sensors have been proposed, which could provide important reference for research group.

The purpose of this paper is to examine the moderating effect of organizational politics on the relationships between work engagement, in-role performance and organization citizenship behavior – organization (OCBO).

Theoretical hypotheses were tested using a sample of 107 supervisor-subordinate dyads in China. Outcome variables, such as in-role performance and OCBO, were rated by supervisors.

Contrary to the established literature on positive work engagement-work outcomes relationships, the findings supported the prediction that work engagement was negatively related to supervisor-rated in-role performance and OCBO when the organizational is perceived as highly political.

The sample size for this study is relatively small. In addition, the authors measured organizational politics from employees’ perspectives, which might not reflect reality objectively. Furthermore, the data were collected at a single time point, so causal relationships could not be validated.

When employees perceive the work environment as political, organizations need to be aware of non-work factors that may influence supervisors’ evaluation of employee performance to ensure they do not demotivate and discourage highly engaged employees.

Considerable research has shown that work engagement is positively related to in-role performance and OCBO. The present study, however, challenges and extends previous research by suggesting that work engagement can lead to low supervisor evaluation of in-role performance and OCBO when the organization is perceived to be political.

The purpose of this paper is to investigate an online monitoring strategy that incorporates fiber Bragg gratings (FBGs) for deformation displacement detection, with the background that slope deformation monitoring is crucial to engineering safety supervision and disaster prevention.

A “beam element” method has been proposed, introduced and experimentally verified in detail. The deformation displacement along a flexible bar can be obtained based on this method, using the distributed strain detected by the FBGs embedded in the bar. A novel sensor structure containing inclinometer casings and a series of connected flexible pipes with FBGs embedded has been proposed. Based on the features of this structure, two FBG deformation sensors have been manufactured and installed into a slope. A matched monitoring station which permits real-time supervision, warning and remote access across the Internet was established and operated.

Displacement data from September 2013 to August 2014 are obtained, which is basically consistent with the practical situation.

The FBG deformation sensors demonstrated a robust and reliable measurement performance, which is promising for real-time disaster warning in slope engineering.

This paper aims to present an effective sensing detection system based on fiber Bragg grating (FBG) sensing technology for protective barriers that have been effectively applied to intercept and stop rocks from falling onto railway tracks. . Determination of exact stress and deformation values during impact tests for key components of the protective barrier forms important criteria for quality control of these barriers. Monitoring changes in force along the protective barrier when deployed in field application allows for real-time disaster warning for collapse and falling rocks.

In this paper, we propose a monitoring strategy for key components of a protective barrier. During performance tests, dynamic force and strain were measured for the steel strands and supporting I-beam, respectively. Design of a special elastic structure for the force transducer based on finite element analysis and tensile tests has been discussed here. Two types of FBG force transducers were manufactured based on the elastic structure. Four FBG force transducers and four FBG strain sensors were used for impact verification testing of a new rigid protective barrier with a design protection level of 25 KJ.

Dynamic force and strain responses were obtained during an impact of free-falling block with a kinetic energy of 25 KJ.

The FBG monitoring scheme can be extremely valuable for optimized design of the barrier and can provide real-time disaster warning in regions of collapse and falling rocks.

This study aims to examine the role of authenticity in tourists’ destination selection, analyze the factors that influence tourists to form their initial opinions and explore how tourists construct the authenticity of traditional villages. The authors selected Chengkan village in Huizhou district, Huangshan city, as a case. In the study, the authors constructed an attribute-hardware-software research framework and analyzed tourists’ authentic emic experiences from the perspective of constructivism. The findings of this study suggest that tourists’ destination selection is influenced by authenticity. The destination culture brokers who interact with tourists play an essential role in forming authentic experiences. According to differences in how tourists construct authenticity, the study divided tourists into three types: primitive imagination, aesthetic reality and rational cognition. The results of this study provide a deeper understanding of various viewpoints about authenticity research and contribute to the academic discussion on how to understand the authenticity of unique cultural heritage sites such as traditional villages in the context of tourism development.

The purpose of this paper is to provide the historical background of genealogical records and analyze the value of Chinese genealogical research through the study of names and genealogical resources.

The paper examines the historical evolution and value of Chinese genealogical records, with the focus on researching the Islamic Chinese names used by the people living in Guilin. The highlight of this paper includes the analysis and evolution of the Islamic Chinese names commonly adopted by the local people in Guilin. It concludes with the recommendations on emphasizing and making the best use of genealogical records to enhance the research value of Chinese overseas studies.

The paper covers the history of Islam and describes how the religion was introduced into China, as well as Muslims' ethnicity and identity. It also places focus on the importance of building a research collection in Asian history and Chinese genealogy.

This research study has a strong subject focus on Chinese genealogy, Asian history, and Islamic Chinese surnames. It is a narrow field that few researchers have delved into.

The results of this study will assist students, researchers, and the general public in tracing the origin of their surnames and developing their interest in the social and historical value of Chinese local history and genealogies.

The study of Chinese surnames is, by itself, a particular field for researching the social and political implications of contemporary Chinese society during the time the family members lived.

Very little research has been done in the area of Chinese local history and genealogy. The paper would be of value to researchers such as historians, sociologists, ethnologists and archaeologists, as well as students and anyone interested in researching a surname origin, its history and evolution.

The purpose of this study is to restore the spatial distribution of overseas remittance businesses in Shantou during the 1940s. It explores various socioeconomic factors that influenced the concentration of local remittance business investment in real estate. By reconstructing the spatial distribution of remittance business activities in Shantou, this study hopes to lay a foundation for further analysis of the business strategies of Chaoshan merchants.

This research draws on information from the published Swatow Guide, archival sources and cadastral maps to identify the location of remittance enterprises and the native place and overseas networks of property owners.

This study reveals that the spatial distribution of the remittance enterprises was determined by the native place origins of local property owners, and that the inflow of overseas Chinese capital contributed to real estate development in Shantou.

Despite the limited access to Chinese official archives, this paper manages to identify several building blocks and neighbors in Shantou for spatial analysis.

This study is the first attempt to use the geographical information system (GIS) method in Chinese urban history research and hopes to establish a larger historical database of Shantou as a sample for comparison.

This investigation advances the spatial study of urban history and overseas Chinese remittances in the maritime society of South China.