Search results

The purpose of this paper is to improve the mechanical and tribological properties of Si₃N₄ ceramics and to make the application of Si₃N₄ ceramics as tribological materials more extensive.

Si₃N₄-based composite ceramics (SN-2L) containing nitrogen-doped graphene quantum dots (N-GQDs) were prepared by hot press sintering process through adding 2 Wt.% nanolignin as precursor to the Si₃N₄ matrix, and the dry friction and wear behaviors of Si₃N₄-based composite against TC4 disc were performed at the different loads by using pin-on-disc tester.

The friction coefficients and wear rates of SN-2L composite against TC4 were significantly lower than those of the single-phase Si₃N₄ against TC4 at the load range from 15 to 45 N. At higher load of 45 N, SN-2L/TC4 pair presented the lowest friction coefficient of 0.25, and the wear rates of the pins and discs were as low as 1.76 × 10⁻⁶ and 2.59 × 10⁻⁴mm³/N·m. The low friction and wear behavior could be attributed to the detachment of N-GQDs from the ceramic matrix to the worn surface at the load of 30 N or higher, and then an effective lubricating film containing N-GQDs, SiO₂, TiO₂ and Al₂SiO₅ formed in the worn surface. While, at the same test condition, the friction coefficient of the single-phase Si₃N₄ against TC4 was at a range from 0.45 to 0.58. The spalling and cracking morphology formed on the worn surface of single-phase Si3N4, and the wear mechanism was mainly dominated by adhesive and abrasive wear.

Overall, a high-performance green ceramic composite was prepared, and the composite had a good potential for application in engineering tribology fields (such as aerospace bearings).

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0161/

The purpose of this paper is to search for the critical-scenarios of autonomous vehicles (AVs) quickly and comprehensively, which is essential for verification and validation (V&V).

The author adopted the index F1 to quantitative critical-scenarios' coverage of the search space and proposed the improved particle swarm optimization (IPSO) to enhance exploration ability for higher coverage. Compared with the particle swarm optimization (PSO), there were three improvements. In the initial phase, the Latin hypercube sampling method was introduced for a uniform distribution of particles. In the iteration phase, the neighborhood operator was adapted to explore more modals with the particles divided into groups. In the convergence phase, the convergence judgment and restart strategy were used to explore the search space by avoiding local convergence. Compared with the Monte Carlo method (MC) and PSO, experiments on the artificial function and critical-scenarios search were carried out to verify the efficiency and the application effect of the method.

Results show that IPSO can search for multimodal critical-scenarios comprehensively, with a stricter threshold and fewer samples in the experiment on critical-scenario search, the coverage of IPSO is 14% higher than PSO and 40% higher than MC.

The critical-scenarios' coverage of the search space is firstly quantified by the index F1, and the proposed method has higher search efficiency and coverage for the critical-scenarios search of AVs, which shows application potential for V&V.

Flexible pressure sensor arrays have promising applications in analog haptics, reconfiguration of sensory functions, artificial intelligence, wearable devices and human-computer interaction. The force disturbance generated by the connecting material between the sensor array units will reduce the detection accuracy of the unit. The purpose of this paper is to propose a flexible pressure sensor with interference immunity capability. A C-type bridge flexible piezoelectric structure is used to improve the pressure perturbation. The interference immunity capability of the sensor has been improved.

In this paper, a C-type pressure sensor array structure by rapid injection moulding is manufactured through the positive piezoelectric effect of a piezoelectric material. The feasibility of C-type interference immunity structure in a flexible sensor array is verified by further analysis and experiment. A flexible pressure sensor array with C-type interference immunity structure has been proposed.

In this paper, we present the results of the perturbation experiment results of the C-type pressure sensor array, showing that the perturbation error is less than 8%. The test of the flexible sensor array show that the sensor can identify the curved angle of up to 120 °, and the output sensitivity of the sensor in the horizontal state reaches 0.12 V/N, and the sensor can withstand the pressure of 80 N. The flexible sensor can work stably in the stretch rate range of 0–8.6% and the stretch length range of 0–6 mm.

In this paper, C-type pressure sensor array structure is fabricated by rapid injection moulding for the first time. The research in this paper can effectively reduce the disturbance of input pressure on the sensor’s internal array and improve the output accuracy. The sensor can intuitively reflect the number of fingers sliding on the sensor by the order in which the maximum voltage appears. Due to the strong interference immunity capability and flexibility of the flexible sensor array mechanism, it has a broad application prospect in the practical fields of haptic simulation, perceptual function reconstruction, artificial intelligence, wearable devices and human–computer interaction.

The purpose of this paper is to develop an equation for the synergistic corrosion of SRB and CO₂ based on the D-W model.

The bacterial types in the a and ß pipelines were studied by the most probable number method, and the corrosion morphology of L360 in pipeline water samples was studied by surface analysis. The corrosion rate of L360 was studied using the weight loss method. The gray correlation method was used to calculate the degree of correlation between the influencing factors of corrosion under the synergistic effect of CO₂ and SRB. The curve obtained from PIPESIM software and experiments data was then fitted using multiple non-linear regression method by MATLAB software.

The equation was used to predict the corrosion of the ß pipeline for verification, and it was found that seven out of ten excavation sites were within a 20% error range.

Using the gray correlation method, an equation that considers synergistic corrosion of SRB and CO₂ has been developed based on the D-W model. The equation could be used to predict the corrosion rate of shale gas gathering pipelines through SRB and CO₂ synergistic corrosion.

The purpose of this study is to provide a micro-nano chip automatic alignment system. Used for micron and nanometer channel alignment of microfluidic chip.

In this paper, combined with the reconstructed micro–nanoscale Hough transform theory, a “clamp–adsorb–rotate” chip alignment method is proposed. The designed alignment system includes a microscopic identification device, a clamping device and a suction device. After assembly, the straightness of the linear slide rail in the horizontal and vertical directions was tested, respectively. The results show that in the horizontal and vertical directions, the linearity error of the linear slide is +0.29 and 0.30 µm, respectively, which meets the requirement of chip alignment accuracy of 15 µm. In the direction of rotation, the angular error between the microchannel and the nanochannel is ±0.5°. In addition, an alignment flow experiment of the chip is designed. The results demonstrate that the closer the angle between the microchannel and the nanochannel is to 90°, the fluid fills the entire channel. Compared with the conventional method, the method and the assembly system realize fully automatic double-layer chip alignment.

A mechanical device designed by Hough transform theory can realize microfluidic chip alignment at nanometer and micron level.

The automatic alignment device adopts Hough transform principle and can be used for microfluidic chip alignment.

This paper aims to examine how stealing thunder, apology and compensation influence customer loyalty in a service failure context, and how trust mediates these relationships.

The study adopted a scenario-based between-group experimental design involving 300 customers.

The results indicated that stealing thunder, apology and compensation have a joint effect on customer loyalty. Specifically, this study found a significant positive impact of stealing thunder on loyalty; a two-way interaction effect of compensation and stealing thunder on loyalty; and a three-way interaction effect on loyalty. Additionally, trust mediated the relationship between service recovery attributes (stealing thunder, apology and compensation) and customer loyalty.

This study introduces a new service recovery method called Stealing Thunder, which is commonly used in the fields of law and communication and is the first to assess stealing thunder as a proactive/preemptive strategy to handle service failures and its impact on customer loyalty. The study found that when stealing thunder was present, compensation had no influence on customer loyalty. Moreover, when stealing thunder was present, compensation had no impact on loyalty when apology was not present. However, compensation had a significant effect on loyalty when stealing thunder and apology were not present. This study finds the value of including proactive/preemptive strategies (stealing thunder) along with regular service recovery strategies (e.g. apology and compensation) in the service recovery process. Results show that service recoveries that include stealing thunder help service failure recovery significantly by increasing customer’s trust.

This study aims to illustrate the mechanisms underlying the effect of stress on flow states in the context of a multilevel organization, in which case employees' perseverative cognition and reactions to challenge–hindrance stressors are affected by leader mindfulness.

Study 1 employed a three-wave time-lag survey, and study 2 conducted a diary study across 10 workdays to replicate the results of study 1. Multilevel structural equation modeling and Monte Carlo simulation were performed using Mplus 8.0 software to test all hypotheses.

Problem-solving pondering transmits the nonlinear effect of challenge stressors on flow, and affective rumination mediates the negative effect of hindrance stressors on flow. Leader mindfulness amplifies the tendency of followers to ruminate on the positive aspects of challenge stressors, consequently increasing their positive reactions and flow. Although leader mindfulness fails to influence followers to ruminate less on hindrance stressors, it negates the harmful effect of affective rumination on the flow experience.

This study is one of the first to examine the associations between stressor types and flow in the workplace. The authors also develop a new theory that highlights the ability of leader mindfulness to shape subordinates' stress, cognitions and reactions through social modeling and the authors identify the boundaries of its beneficial effects.

The purpose of this paper is to discuss the relationship between bra's visual impression and bra parts, and then to explore the application of visual impression in bra design.

Firstly, 82 female undergraduates are asked to answered this questionnaire online, which is about the importance of parts in bra design. In the part of data analysis, the method of principal part analysis (PCA) are used to get the relationship between bra's parts, and reduce dimension of factors that influence bra design. After that, those group of features are further discussed from the perspective of visual design. Finally, design an application based on conclusion.

To get the influence features of bra appearance and improve the visual design effect, this paper matches the bra parts with visual features (color, texture, shape and space) and presents four main features of bra design: “color,” “visual texture,” “design shape” and “spatial expression” together with corresponding bra parts and technique of expression. Moreover, user interface in bra cloud customization is designed.

The conclusion, which shows the corresponding relationship between bra visual effect and its basic parts, has an important role in bra visual design. First, it can be useful for design idea with different technique of expression, which may supply a theoretical basis for design. Secondly, the combination of bra parts and visual features can be used to evaluate the appearance.

Discussing the bra visual impression based on bra's basic parts and visual features provides a theoretical method for bra design and its appearance evaluation.

This study aimed to improve the financing credit evaluation for small and medium-sized real estate enterprises (SMREEs). A financing credit evaluation model was proposed, and a blockchain-driven financing credit evaluation framework was designed to improve the transparency, credibility and applicability of the financing credit evaluation process.

The design science research methodology was adopted to identify the main steps in constructing the financing credit model and blockchain-driven framework. The fuzzy analytic hierarchy process (FAHP)–entropy weighting method (EWM)–set pair analysis (SPA) method was used to design a financing credit evaluation model. Moreover, the proposed framework was validated using data acquired from actual cases.

The results indicate that: (1) the proposed blockchain-driven financing credit evaluation framework can effectively realize a transparent evaluation process compared to the traditional financing credit evaluation system. (2) The proposed model has high effectiveness and can achieve efficient credit ranking, reflect SMREEs' credit status and help improve credit rating.

This study proposes a financing credit evaluation model of SMREEs based on the FAHP–EWM–SPA method. All credit rating data and evaluation process data are immediately stored in the proposed blockchain framework, and the immutable and traceable nature of blockchain enhances trust between nodes, improving the reliability of the financing credit evaluation process and results. In addition, this study partially fulfills the lack of investigations on blockchain adoption for SMREEs' financing credit.

Vicarious abusive supervision (VAS) has recently garnered the attention of hospitality researchers. VAS is prevalent in hospitality work settings characterized by long production chains and open operating environments. Based on the conservation of resources (CORs) theory, this study aims to examine how VAS influences hospitality employees’ work behaviours (i.e. supervisor-directed deviance, silence and helping behaviour) via affective rumination, with the moderating role of industry tenure as an individual contingency on the relationship between VAS and affective rumination.

The data were gathered from 233 restaurant frontline employees and their supervisors in Turkey. The authors tested the proposed model using partial least squares method through SmartPLS 3.

The results reveal that VAS triggers affective rumination, which, in turn, is positively related to supervisor-directed deviance and silence, and negatively related to helping behaviour. Moreover, industry tenure, as a buffer resource, significantly moderates the relationship between VAS and affective rumination.

To reduce the occurrence of VAS and mitigate its negative effects, managers should establish a work environment that embraces understanding and respect, pay attention to how they communicate with employees, implement appropriate interventions when VAS occurs and conduct stress management training and improve employees’ emotion regulation skills in ways that correspond to the employees’ industry experience.

This study advances research on VAS by offering insight into how VAS impacts employees’ work behaviours via the underlying mechanism of affective rumination through a COR lens. The findings also shed light on the salient buffering effect of industry tenure as an individual contingency.