Search results

The purpose of this paper is to investigate the impact of thermal radiation interaction with Hall current, buoyancy force, and oscillatory surface temperature on hydromagnetic-mixed convective heat exchange stream of an electrically conducting nanofluid past a moving permeable plate in a porous medium within a rotating system.

Analytical closed-form solutions are obtained for both the momentum and the energy equations using the perturbation method.

The effects of various important parameters on velocity and temperature fields within the boundary layer are discussed for three different water-based nanofluids containing copper (Cu), aluminum oxide (Al₂O₃), and titanium dioxide (TiO₂) as nanoparticles. Local skin friction and Nusselt number are illustrated graphically and discussed quantitatively. The results show that Hall current significantly affects the flow system. Results for some special cases of the present analysis are in good agreement with the existing literature.

The problem is relatively original to study the hydromagnetic-oscillatory flow of a nanofluid with Hall effect and thermal radiation past a vertical plate in a rotating porous medium.

This study aims to expose the flow phenomena and entropy generation during a; magnetohydrodynamic (MHD) Poiseuille flow of water-based nanofluids (NFs) in a porous channel subject to hydrodynamic slip and convective heating boundary conditions. The flow caused by the uniform pressure; gradient between infinite parallel plates is considered steady and fully developed. The nanoparticles; namely, copper, alumina and titanium oxide are taken with pure water as the base fluid. Viscous dissipation and Joule heating impacts are also incorporated in this investigation.

The reduced governing equations are solved analytically in closed form. The physical insights of noteworthy parameters on the important flow quantities are demonstrated through graphs and analyzed elaborately. The thermodynamic analysis is performed by calculating entropy generation; rate and Bejan number. A graphical comparison between solutions corresponding to NFs and regular fluid in the channel is also provided.

The analysis of the results divulges that entropy generation minimization can be achieved by an appropriate combination of the geometrical and physical parameters of thermomechanical systems. It is reported that ascent in magnetic parameter number declines the velocity profiles, while the inverse pattern is witnessed with augmentation in hydrodynamic slip parameters. The temperature dissemination declines with the growth of Biot numbers. It is perceived that the entropy generation rate lessens with an upgrade in magnetic parameter, whereas the reverse trend of Bejan number is perceived with expansion in magnetic parameter and Biot number. The important contribution of the result is that the entropy generation rate is controlled with an appropriate composition of thermo-physical parameter values. Moreover, in the presence of a magnetic field and suction/injection at the channel walls, the shear stresses at the channel walls are reduced about two times.

In various industrial applications, minimizing entropy generation plays a significant role. Miniaturization of entropy is the utilization of the energy of thermal devices such as micro heat exchangers, micromixers, micropumps and cooling microelectromechanical devices.

An attentive review of the literature discloses that quite a few studies have been conducted on entropy generation analysis of a fully developed MHD Poiseuille flow of NFs through a permeable channel subject to the velocity slip and convective heating conditions at the walls.

The purpose of this paper is to formulate and analyse a convergent numerical scheme and apply it to investigate the coupled problem of fluid flow with heat and mass transfer in a porous channel with variable transport properties.

This paper derives the model by assuming a fully developed Brinkman flow with temperature-dependent viscosity and incorporating viscous dissipation, variable transport properties and nonlinear heat and mass sources. For the numerical formulation, the nonlinear sources are treated in semi-implicit manner, whereas the non-constant transport properties are treated by lagging in time leading to decoupled diagonally dominant systems. The consistency, stability and convergence results are derived. The method of manufactured solutions is adopted to numerically verify the theoretical results. The scheme is then applied to investigate the impact of relevant parameters, such as the viscosity parameter, on the flow.

Based on the numerical findings, the proposed scheme was found to be unconditionally stable and convergent with first- and second-order accuracy in time and space, respectively. Physical results showed that the flow parameters have influence on the flow fields, particularly, the flow is enhanced by increasing porosity and viscosity parameters and the concentration decreases with increasing diffusivity, whereas both the temperature and Nusselt number decrease with increasing thermal conductivity.

Numerically, the proposed numerical scheme can be applied without concerns on time steps size restrictions. Non-physical solutions cannot be computed. Physically, the flow can be increased by increasing the viscosity parameters. Pollutants with higher diffusivity will have their concentration decreased faster than those of lower diffusivity. The fluid temperature would decrease faster if its thermal conductivity is higher.

A fully coupled fluid flow with heat and mass transfer problem having nonlinear properties and nonlinear fractional sources and sink terms, presumably, has not been investigated in a general form as done in this study. The detailed numerical analysis of this particular scheme for the identified general model has also not been considered in the past, to the best of the author’s knowledge.

This study aims to investigate the flow behavior of aluminum oxide–water nanofluid with variable viscosity flowing through the microchannel parallel with the ground, with low aspect ratio. The study focuses on the first and second law analyses of Poiseuille flow using water as the base fluid with alumina nanoparticles suspended in it. Combined effects of thermal radiation, viscous dissipation, variable viscosity, nanoparticle shape factor and volume fraction on the thermal performance are studied and the in-built irreversibility in the process is examined.

The governing equations with dimensions are reduced to non-dimensional equations by using dimensionless quantities. Then, the Runge–Kutta–Fehlberg shooting scheme tackles the present non-linear equations.

The outcomes of the present analysis reveal that the activation energy parameter with its increase, depletes the exergetic effectiveness of the system, thus defending the fact to keep the activation energy parameter the lowest as possible for the system efficiency. In addition, thermal radiation and Biot number enhance the release of heat energy, thereby cooling the system. Bejan number graph exhibits the decreasing behavior for the increased nanoparticle shape factor, whereas the temperature enhances with the rise in nanoparticle shape factor.

The effects of nanoparticle shape factor in Poiseuille flow for alumina–water nanoliquid in low aspect ratio microchannel is inspected at the earliest. Exergetic effectiveness of the system is studied and heat transfer characteristics are explored for thermal radiation effect and activation energy parameter. Besides, BeηSphere>BeηBlades.

This paper aims to study the stagnation point flow of Al₂O₃–Cu/H₂O hybrid nanofluid over a radially shrinking disk with the imposition of the magnetic field, viscous-Ohmic dissipation and convective boundary condition.

Similarity variables are introduced and used in reducing the governing partial differential equations into a system of ordinary differential equations. A built-in bvp4c solver in MATLAB is then used in the computation of the numerical solutions for equations (7) and (8) subject to the boundary conditions (9). Then, the behavior of the flow and thermal fields of the hybrid nanofluid, with various values of controlling parameters, are analyzed.

The steady flow problem resulted in multiple (dual) solutions. A stability analysis performed to identify the stable solution applicable in practice revealed that the first solution is stable while the second solution is unstable. The skin friction coefficient and Nusselt number of the hybrid nanofluid are found to be greater than the Al₂O₃–H₂O nanofluid. Thus, the hybrid nanofluid has a better heat transfer performance than the nanofluid. Besides that, the presence of the magnetic field, suction, convective boundary condition and the enhancement of nanoparticle volume fraction of Cu augments the skin friction coefficient and Nusselt number of the hybrid nanofluid. Meanwhile, the presence of viscous-Ohmic dissipation reduces the heat transfer performance of the fluid.

To the best of the authors’ knowledge, the present results are original and new for the study of the flow and heat transfer of Al₂O₃–Cu/H₂O hybrid nanofluid past a permeable radially shrinking disk. Considerable efforts have been directed toward the study of the boundary layer flow and heat transfer over stretching/shrinking surfaces and disks because of its numerous industrial applications, such as electronic, power, manufacturing, aerospace and transportation industries. Common heat transfer fluids such as water, alumina, cuprum and engine oil have limited heat transfer capabilities due to their low heat transfer properties. In contrast, metals have higher thermal conductivities than these fluids. Therefore, it is desirable to combine the two substances to produce a heat transfer medium that behaves like a fluid but has higher heat transfer properties.

This paper aims to investigate the hydrodynamic instability properties of a mixed convection flow of nanofluid in a porous channel.

The treated single-phase nanofluid is a suspension consisting of water as the working fluid and alumina as a nanoparticle. The anisotropy of the porous medium and the effects of the inclination of the magnetic field are highlighted. The effects of viscous dissipation and thermal radiation are incorporated into the energy equation. The eigenvalue equation system resulting from the stability analysis is processed numerically by the spectral collocation method.

Analysis of the results in terms of growth rate reveals that increasing the volume fraction of nanoparticles increases the critical Reynolds number. Parameters such as the mechanical anisotropy parameter and Richardson number have a destabilizing effect. The Hartmann number, permeability parameter, magnetic field inclination, Prandtl number, wave number and thermal radiation parameter showed a stabilizing effect. The Eckert number has a negligible effect on the growth rate of the disturbances.

Linear stability analysis of Magnetohydrodynamics (MHD) mixed convection flow of a radiating nanofluid in porous channel in presence of viscous dissipation.

The purpose of this study is to analyze magnetohydrodynamic three-dimensional flow of Casson nanofluid over a stretching sheet in presence of thermophoresis and Brownian motion effects. In contrast, the convective surface boundary conditions with the effects of radiation are applied.

The governing partial differential equations are transformed into highly nonlinear coupled ordinary differential equations consisting of the momentum, energy and nanoparticle concentration via suitable similarity transformations, which are then solved the using optimal homotopy analysis method (OHAM) a Mathematica Package BVPh2.0.

The influence of emerging physical flow parameters on fluid velocity component, temperature distribution and nanoparticle concentration are discussed in detail. Also, an OHAM solution demonstrates very good correlation with those obtained in the previously published results. It is noticed that OHAM can overcome the earlier restriction, assumptions and limitation of traditional perturbation method. The main advantage of this method is that OHAM can be applied directly to nonlinear differential equations without using linearization and round-off errors, and therefore, it cannot be affected by error associated to discretization.

Here the approximate solutions are compared with the numerical results published in earlier work.

This paper aims to demonstrate an application of a novel approximation technique, for a function whose partial series is known, to a problem in thermal ignition in a combustible variable viscosity fluid.

Analytical solutions are constructed for the governing non‐linear boundary‐value problem using regular perturbation technique (RPT) coupled with computer‐extended series solution (CESS) and a special type of Hermite‐Padé approximant.

The steady state thermal ignition criticality conditions and their dependent on both Frank‐Kamenetskii and viscous heating parameters are accurately obtained. The results also revealed the rapid convergence of the approximation procedure with gradual increase in the number of series coefficients utilized in the approximants.

The analytical and computational procedures utilized in this paper are advocated as an effective tool for investigating several other parameter dependent nonlinear boundary‐value problems.

For this purpose, a linear stability analysis based on the Navier–Stokes and Maxwell equations is made leading to an eigenvalue differential equation of the modified Orr–Sommerfeld type which is solved numerically by the spectral collocation method based on Chebyshev polynomials. Unlike previous studies, blood is considered as a non-Newtonian fluid. The effects of various parameters such as volume fraction of nanoparticles, Casson parameter, Darcy number, Hartmann number on flow stability were examined and presented. This paper aims to investigate a linear stability analysis of non-Newtonian blood flow with magnetic nanoparticles with an application to controlled drug delivery.

Targeted delivery of therapeutic agents such as stem cells and drugs using magnetic nanoparticles with the help of external magnetic fields is an emerging treatment modality for many diseases. To this end, controlling the movement of nanoparticles in the human body is of great importance. This study investigates controlled drug delivery by using magnetic nanoparticles in a porous artery under the influence of a magnetic field.

It was found the following: the Casson parameter affects the stability of the flow by amplifying the amplitude of the disturbance which reflects its destabilizing effect. It emerges from this study that the taking into account of the non-Newtonian character is essential in the modeling of such a system, and that the results can be very different from those obtained by supposing that the blood is a Newtonian fluid. The presence of iron oxide nanoparticles in the blood increases the inertia of the fluid, which dampens the disturbances. The Strouhal number has a stabilizing effect on the flow which makes it possible to say that the oscillating circulation mechanisms dampen the disturbances. The Darcy number affects the stability of the flow and has a stabilizing effect, which makes it possible to increase the contact surface between the nanoparticles and the fluid allowing very high heat transfer rates to be obtained. It also emerges from this study that the presence of the porosity prevents the sedimentation of the nanoparticles. By studying the effect of the magnetic field on the stability of the flow, it is observed that the Hartmann number keeps the flow completely stable. This allows saying that the magnetic field makes the dissipations very important because the kinetic energy of the electrically conductive ferrofluid is absorbed by the Lorentz force.

The originality of this paper resides on the application of the linear stability analysis for controlled drug delivery.

The purpose of this paper is to study the thermal behaviour of a fully wet porous fin of longitudinal profile. The significance of radiative and convective heat transfer has been scrutinised along with the simultaneous variation of surface emissivity, heat transfer coefficient and thermal conductivity with temperature. The emissivity of the surface and the thermal conductivity are considered as linear functions of the local temperature between fin and the ambient. Darcy’s model was considered to formulate the heat transfer equation. According to this, the porous fin permits the flow to penetrate through it and solid–fluid interaction occurs.

Runge–Kutta–Fehlberg fourth–fifth-order method has been used to solve the reduced non-dimensionalized ordinary differential equation involving highly nonlinear terms.

The impact of pertinent parameters, such as convective parameter, radiative parameter, conductivity parameter, emissivity parameter, wet porous parameter, etc., on the temperature profiles were elaborated mathematically with the plotted graphs. The heat transfer from the fin enhances with the rise in convective parameter.

The wet nature of the fin enhances heat transfer and in many practical applications the parameters, such as thermal conductivity, heat transfer coefficient as well as surface emissivity, vary with temperature. Hence, the main objective of the current study is to depict the significance of simultaneous variation in surface emissivity, heat transfer coefficient and thermal conductivity with respect to temperature under natural convection and radiation condition in a totally wetted longitudinal porous fin.