Search results

The paper aims to introduces an experimental work to investigate the torsional behavior of reinforced concrete (RC) beams strengthened by near-surface mounted (NSM) carbon fiber-reinforced polymer (CFRP) ropes.

In this research, nine rectangular RC beams of 250 mm × 300 mm cross-section and 1,600 mm in length were constructed and tested considering the studied parameters. These parameters include the length of the CFRP rope, the orientation of the CFRP rope, the arrangement of longitudinal and the scheme of NSM-CFRP ropes.

In comparison to control specimens, the results demonstrate a considerable improvement in the torsional response of RC beams strengthened with the CFRP rope. Additionally, specimens strengthened with 90° vertical ropes increase torsional moment capacity more efficiently than specimens strengthened with 45° inclined ropes since the stress concentration leads to premature debonding of the CFRP rope. Whereas RC beams' ability to withstand torsional moments is reduced as the distance between reinforcing CFRP ropes is increased. According to test results, adding CFRP ropes to RC beams' bottoms had a slightly positive impact on torsional response.

This paper fulfills an identified need to study how the using of the CFRP rope is effective in strengthening RC beam subjected to torsion moment.

The current status of nanotechnology research and development in Jordan is analyzed. In recent years, Jordanian institutions demonstrated considerable interest in the development and production of nanotechnology. Here the purpose of this paper is to provide detailed information about the status of nanotechnology in Jordan in terms of several factors that influence selectivity in nanotechnology and the number of published peer-reviewed research articles.

Several factors that influence selectivity in nanotechnology and the number of published peer-reviewed research articles were analyzed. A detailed analysis of the collected data reveals that the number of publications, citations, and patents is highly dependent on the amount of research fund.

The development in nanotechnology is associated with presence and accessibility of sensitive laboratory equipment. The nanotechnology research output in Jordan is still lower than it should be due to the lack of necessary laboratory infrastructure. This is due to the insufficient funds allocated to scientific research, the restrictive access to available instruments and the bureaucracy of some governmental departments. Compared to some developed countries, Jordan is noticeably behind in developing a nanotechnology system of research and industry. It will take time as well as technical and financial resources in order to achieve an advanced level in the field of nanotechnology in Jordan. Nevertheless, many Jordanian researchers are doing their best and are producing some good research articles.

The many applications to the same approach.

Time and publications’ resources.

Peer cooperation.

First comprehensive review ever. A base for researchers and decision makers.

The main purpose of this study is to determine the antecedent factors of smart government service apps intention and its impact on actual use by extending the unified theory of acceptance and use of technology (UTAUT) in the Jordanian context.

To achieve the main purpose, a quantitative method was used to test collected data, and hypotheses testing through using statistical package for social sciences (SPSS) and smart partial least squares software.

The findings indicate that social media advertising has a positive effect on both social influence and peer influence. Furthermore, it demonstrated a significant effect of social influence on performance expectancy. In addition, there is a direct correlation between the government capacity, effort expectancy, facilitating conditions and the intention to use e-government services. Lastly, the results mainly show that the actual use of e-government services is significantly and positively influenced by intention and self-isolation. Next, as expected, self-isolation moderated the relationship between intention to use and actual use of e-government services via the Sanad application, and hence the related hypothesis was supported.

This study provides practical recommendations for the policy-makers in the Jordanian e-government and Ministry of Digital Economy and Entrepreneurship (MoDEE) in Jordan.

The main issue is whether customers prefer convenience over Shariah compliance or the opposite when they decide their Islamic banking needs. The purpose of this paper is to explore why customers adopt Islamic banking products and services: Shariah compliance or convenience?

Using convenience sampling, 310 respondents’ data were collected through online survey. For testing the fit and hypotheses of the proposed model, AMOS 25 software and Smart-PLS 4.0 software have been used.

Attitude, Islamic value and convenience have significant determinants of Islamic banking products and services. Shariah compliance has no direct or indirect influence on neither intention nor actual behaviour to adopt Islamic banking services. Furthermore, gender has no such differential effect on the adoption.

Managers and marketers of Islamic banks may benefit from the findings of this study, which demonstrate fresh insights regarding the factors which help in strategy formulations to promote Islamic banking services.

The growth of Islamic banks, branches and windows is remarkable in both Muslim-majority and Muslim-minority countries in the world. This paper postulates the behavioural finance studies in Islamic banking and finance research stream by extending the theory of planned behaviour of Ajzen (1985) as all the three new constructs (Islamic value, convenienc and Shariah compliance) are statistically fit for further studies. However, only Islamic value and convenience are the two significant factors which drive customers to take decision in the proposed model. This study gives insights to the bankers and authority about the consumer behaviour.

This study explored the ramifications of COVID-19 on construction operations in Malaysia.

Following a detailed literature review, 37 ramifications are identified and divided into nine aspects. A self-designed survey is then employed to seek the perceptions of construction practitioners around the Klang Valley region regarding the significance of the ramifications. A total of 203 valid responses are subjected to statistical analyses to prioritise the ramifications.

All the potential ramifications are perceived to be significant, with the five utmost critical ramifications being rescheduling the project timeline, compliance with government SOP, delay in the handover project, compulsory COVID-19 test for all workers and the extra cost incurred to provide COVID-19 test for workers.

This study highlights the ramifications of COVID-19 on construction operations and deliberately informs construction organizations regarding the shortcomings of recent construction management. Besides, the insights suggested that industry practitioners devise corresponding strategies for project sustainability in future similar crises.

The findings serve as a valuable reference and are benign to industry professionals and researchers from developing nations, especially nations that share similar characteristics to Malaysia.

The purpose of this paper is to investigate how the CARTER model impact on attitudinal loyalty in Islamic banks.

The paper presents primary data collected by self-administered questionnaires involving a sample of 655 respondents from all local Islamic banks in Jordan. SPSS was used to analyse the data and AMOS was used to analyse confirmatory factor analysis.

In terms of the dimensions of CARTER model, the results show that empathy, assurance and compliance are the most influential factors leading to attitudinal loyalty. Insignificant relationship between tangibles and attitudinal loyalty was found. The findings also show that customer satisfaction plays as a mediating variable between dimensions of service quality and attitudinal loyalty.

Islamic banks should focus on continuous improvement of service quality because of the direct effect on attitudinal loyalty. Managers should pay special attention to the quality provided by their employees and develop their skill set through training and education programmes using Islamic knowledge. They should make sure that all activities are carried out in the right manner the first time and every time to enhance customer loyalty at all times. They also are recommended to comply with the Shariah board alliances and collaboration and other decisions of the Islamic Fiqh Academy.

As the first study of its kind in Jordan, the paper’s contribution stems from filling the research gap in examining the effects of the various service quality dimensions on the impact of attitudinal loyalty in Islamic banks using the CARTER model.

Driven by the explosive growth of artificial intelligence, WealthTech has played a pivotal role in reshaping the wealth management industry in recent years. Within this context, this study aims to explain the antecedents of users’ continuance intention to use the WealthTech platform by integrating the technology continuance theory (TCT), task-technology fit (TTF) and digital nudging.

To empirically test the research model, an online survey was conducted among 337 investors who had previously used WealthTech platform. The authors used partial least squares structural equation modeling (PLS-SEM) to assess the research model and test the hypotheses.

PLS-SEM results show that the proposed model has moderate explanatory power in explaining WealthTech continuance intention. The results also found that attitude, digital nudging and satisfaction are important drivers in promoting WealthTech continuance intention. According to importance performance map analysis, digital nudging, expectation confirmation and satisfaction are critical factors in explaining continuance intention, which require managerial action.

To the best of the authors’ knowledge, this is one of the earliest studies that analyze the determinants of WealthTech continuance intention by integrating TCT with TTF and digital nudging. The study’s findings highlight the importance of fit factors and digital nudging in promoting successful WealthTech services.

The advancement of artificial intelligence (AI) has brought intelligent online shopping experiences to customers. AI-powered retail platforms deliver personalized shopping experiences through tailored recommendations, promotions and assistance. Given the increasing preference for online shopping, it is crucial to explore methods to optimize the adoption of AI-powered retail platforms. To address this, this study aims to examine the impact of technology readiness motivators (optimism and innovativeness) and inhibitors (discomfort and insecurity) on perceived trust, perceived usefulness and purchase intention toward AI-powered retail platforms.

Data were collected from 276 customers in Egypt, primarily from the millennial and Gen Z demographic segments. The collected data were then analyzed using the statistical package for social sciences (SPSS) and partial least squares structural equation modeling (PLS-SEM).

The findings revealed that optimism, innovativeness and discomfort significantly influence perceived trust, while optimism, insecurity and perceived trust significantly influence perceived usefulness. Both perceived trust and usefulness are significant predictors of purchase intention. Perceived trust mediates the effects of technology readiness motivators on perceived usefulness and purchase intention. Moreover, perceived usefulness mediates the effects of technology readiness motivators, insecurity and perceived trust on purchase intention.

To date, there are few investigations regarding the acceptance and adoption of AI-powered retail platforms in developing countries. Thus, this study offers valuable theoretical and practical implications in the context of smart retail technology adoption.

This study explores how customers' individual characteristics and perceptions affect acceptance of service robots as a hotel workforce. The Interactive Technology Acceptance Model (iTAM) has inspired us to investigate effects of customers' technological self-efficacy, perceived interactivity, sense of utility, and enjoyment-level of acceptance related to hotel-service robots as staff.

Data were collected from 224 customers via an online questionnaire conducted in the period April–June 2022 by convenience sampling, and then analyzed by using partial least squares – structural equation modeling (PLS-SEM).

The findings show that customers' technological self-efficacy and perceived interactivity with service robots enhances perceived usefulness and perceived enjoyment, serving as functional and emotional value components of service robots. They also demonstrate that robot's interactivity outweighs other robot's value components, such as perceived usefulness and perceived enjoyment for acceptance of service robots as employees in hotels.

While empirically validating the iTAM, this study emphasizes service robot interactivity as the most important aspect for customers' acceptance, and it adds a new perspective regarding the underexplored role of the customer-robot interface. Combining specific dimensions from different technology acceptance models (functional/socio-emotional/relational; utilitarian/hedonic) the study contributes to the service robot literature currently missing a more holistic understanding of consumers' experience and adoption drivers, and it provides managerial guidance on how to successfully implement service robots in hotel environments.