Search results

This paper aims to investigate the corrosion resistance of two types of coatings – one is ceria sol coating and the other is ceria sol coating modified by ZnO nanoparticles on 7075 aluminum alloy in 3.5% NaCl solution.

Aluminum alloys were dipped into ceria sol and ceria sol modified by ZnO nanoparticles separately and removed after 10 min from the solutions and dried at 110°C for 30 min and heated at 500 °C for 30 min to form the coatings. The coatings have been characterized by using field emission scanning electron microscopy (FE-SEM), electrochemical impedance spectroscopy (EIS), X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS). The EIS tests were performed in a corrosive solution of 3.5% NaCl.

The results showed that the coating of ceria sol modified by ZnO nanoparticles has higher corrosion resistance than the ceria sol coating and the bare sample. Also, the best efficiency is related to aluminum sample immersion after 1 h in NaCl corrosive solution for coating modified by ZnO nanoparticles.

In this research, the modification of ceria sol coating by ZnO nanoparticles had an effect on improving the corrosion behavior of aluminum alloy. It is also understood that modification of coatings is an effective parameter on corrosion resistance.

Previous studies have established to a great extent that regulatory frameworks and, in particular, procurement approaches – that are common in a particular context – have a major impact on the success of building information modelling (BIM) implementation in construction projects. Despite the close links between these two concepts, research on the effect of procurement approaches on BIM implementation is scarce. To address this gap, this paper aims to investigate the barriers that affect BIM implementation through the lens of procurement approaches.

A mixed-method approach was adopted using a questionnaire survey (n = 116) and interviews with key stakeholders (n = 12) in Jordan. The outcomes of the quantitative parts were augmented with findings from interviews.

It was revealed that the deployment of unfavourable construction procurement approaches represents a major hurdle towards BIM implementation. Though essential for enhancing BIM implementation, it is revealed that a fundamental change from the common design-bid-build (DBB) to more collaborative procurement approaches remains infeasible in view of the realities that govern the construction industry.

It was revealed the deployment of unfavourable construction procurement approaches represents a major hurdle towards BIM implementation. Though essential for enhancing BIM implementation, it is revealed that a fundamental change from the common DBB to more collaborative procurement approaches remains infeasible given the realities that govern the construction industry.

As the first of its kind, a set of recommendations for establishing supportive, workable procurement that does not deviate significantly from common procedures and practices is presented. Rather than advocating a shift to procurement approaches that are aligned with BIM, the findings offer novel insight into the necessity of developing a framework within the boundaries of the current and widely adopted procurement approaches to address the identified construction procurement issues and facilitate BIM implementation.

This manuscript is related to compute $N$-kink soliton solutions for conformable Fisher–Kolmogorov equation (CFKE) by using the generalized extended direct algebraic method (EDAM). The considered problem has important applications in mathematical biology and reaction diffusion processes. Also, the mentioned problem has significant applications in population dynamics. The fractional order conformable derivative has many features as compared to the other fractional order differential operators. For instance, the chain, product and quotient procedures do not satisfy by other fractional differential operators, but conformable operators obey the mentioned rules. Hence, we compute the soliton solutions for the mentioned problem and present its various dynamical behaviours graphically.

The generalized EDAM is used in this article to examine the calculation of N-kink soliton solutions for the CFKE. In mathematical biology and reaction-diffusion processes, the topic under consideration holds great significance, especially when considering population dynamics.

The results highlight the benefits of utilising conformable derivatives in mathematical modelling and further our understanding of fractional differential equations and their applications.

The work focuses primarily on N-kink soliton solutions, which may limit the examination of alternative types of solutions (e.g., multi-soliton or periodic solutions) that might give new insights into the dynamics of the CFKE.

The generated N N-kink soliton solutions can enhance mathematical models in biological contexts, notably in modelling population dynamics, disease propagation and ecological interactions, leading to better forecasts and interventions.

Public health initiatives can benefit from the understanding of disease transmission and intervention efficacy that comes from modelling population dynamics and reaction-diffusion processes.

The use of the generalized EDAM to obtain solutions for N-kink soliton problems is an innovative method for solving the conformable Fisher–Kolmogorov equation, demonstrating the power of this mathematical tool.

Building Information Modeling (BIM) competitions are a beneficial approach to enhance BIM education, offering students practical experience in BIM application, including mastering workflows and technical tools. However, research exploring the individual perceptions influencing participation intentions and behaviors in BIM competitions is limited. Therefore, this study aims to investigate the factors affecting university students' behavioral intention and behavior in BIM competitions, providing theoretical support for BIM competitions and educational reform.

This study employs the Structural Equation Modeling (SEM) based on the Unified Theory of Acceptance and Use of Technology (UTAUT) framework to analyze the factors influencing BIM competition participation among 970 Architecture, Engineering, and Construction (AEC) university students.

The results of the study show that social influence, attitude, and self-efficacy play critical roles in shaping students' intentions to participate in BIM competitions. Furthermore, self-efficacy, facilitating conditions, and behavioral intention significantly influence students' actual engagement in such competitions. Surprisingly, effort expectancy negatively influences intentions, as less challenging tasks can lead students to perceive their participation as less impactful on their skills and learning, reducing their behavioral intention to participate.

This research provides valuable insights into the effectiveness of BIM competitions in enhancing BIM education for AEC students. Extending the UTAUT model to include self-efficacy and attitude, provides a novel perspective for understanding students' intentions and behaviors regarding BIM competitions. The study’s theoretical support proposes incorporating BIM competitions to augment BIM teaching methods and offers suggestions for advancing the efficacy of students' involvement in BIM competitions within higher education, thus contributing to educational reform in the AEC sector.

The paper aims to propose a mediation moderated model to examine the influence of academic reliance on students' intellectual engagement.

Four hundred and seventy-one respondents who completed a self-reported questionnaire were chosen to participate in the study using a convenient sampling technique. The hypotheses were tested using PLSc.

Findings from the study reveal academic resilience and academic diligence positively predicts students' intellectual engagement. Academic diligence positively predicts students' intellectual engagement and further mediates the effect of academic resilience on intellectual engagement. Finally, learning support positively predicts intellectual engagement and further moderates the effect of the association between academic resilience and academic diligence on intellectual engagement.

This research shows that higher education administrators must establish effective and efficient policies that integrate students' academic resilience, academic diligence and learning assistance.

This paper is amongst the first to have tested a model including resilience, academic diligence, intellectual engagement and learning support in a university setup from a developing country perspective.

The oil and gas industry form the main resource of economy in Iraq and constructing any project in such sectors requires a huge amount of expenses due to the unique requirements that oil and gas facilities required in such projects. Therefore, adopting an appropriate technological approach such as building information modeling (BIM) which is unfortunately not adopted yet in Iraq is essential to successfully deliver these projects. Thus, this paper aimed to introduce BIM to Iraq through Basra Oil Company (BOC) which is one of the biggest public oil and gas companies in Iraq.

The related literature of journals articles, conference proceedings and published reports have been reviewed. As a result, firstly: a hypothesis has been derived that is “If Basra Oil Company (BOC) adopts and applies BIM approach instead of the 2D approach currently used to manage its projects, the company can overcome several constraints in managing its projects that associated with such 2D traditional approach”; secondly: homogenous, consistence and reliable web-based questionnaire has been designed as its Cronbach’s alpha equal to 0.897 and 0.711 for BIM benefits and barriers, respectively. This questionnaire distributed to the BOC related professionals to test such hypothesis by investigating their readiness and accepting of BIM approach and to rank BIM barriers based on five-point Likert scale.

Based on the analysis using IBM SPSS Statistics 26 of 115 responses, almost 50% of the respondents had experience 11–15 years, while 22.6% had experience more than 15 years in oil and gas industry construction projects. Those participants were from diverse engineering majors that are: 4.3% Architectural Engineers, 31.3% Civil Engineers, 20% Mechanical Engineers, 22.6% Electrical Engineers and 21.7% from other engineering majors. The respondents’ departments demography was 16.5% of design department, 12.2% of construction department, 20.9% of Project Management Department, 12.2% of Maintenance department, 4.3% of HSE Department, 13% of Production Department and 20.9% of “Other Department.” The study resulted in 1: accepting BIM approach to be an alternative of current 2D-traditional approach used by the company to manage and construct its projects, since mean of collected data is (4.4332), Kruskal–Wallis H test significance values were 0.398 and 0.372; and ANOVA test significance values were 0.433 and 0.599 among Engineering Majors groups and Company’s Department groups, respectively. 2: Disclosed and sequenced BIM barriers in the company based on their criticality. 3: verifying reliably how BIM attributes are important to oil and gas construction projects in Iraq, 4: the company top management and company policies are the most critical potential factors to hinder or adopt and implement BIM in the company, 5: while cost is not seen a critical barrier to implement BIM in the oil and gas sector.

The limitation of this study is the excluding of decision makers of BOC, thus more profound future studies need to be conducted where top management and decision makers are involved, particularly the present study demonstrated that support of company top management is the most critical factor which can help the company to adopt (BIM).

The study concludes that BIM approach is valuable for managing projects in oil and gas sector in Iraq and identify the originality in output by using the research method. This noble study provides a leverage for enhanced research to adopt and implement building information modeling (BIM) in Iraq as the study originally demonstrates benefits and identifies the critical barriers in BIM implementation to push the boundaries toward adopt Digitalization and reduce CO2 emission in Iraqi oil and gas sector. The study can be used as evidence and platform to encourage professionals and practitioners to present more sophisticated tools of BIM in the oil and gas industry, especially for facility and operation management. These findings achieved via oil and gas experts, and it is first time to achieve such findings from a case study in Iraqi oil and gas sector.

With growing concern about sustainable development and increased awareness of environmental issues, digital technologies (DTs) are gaining prominence and becoming a promising trend to improve productivity, sustainability and project performance in the construction industry. Nonetheless, the uptake of DTs in the construction industry has been limited and plagued with roadblocks. This study aims to identify critical barriers for construction organisations to adopt DTs and to demonstrate relationships between organisational characteristics and the perceived DTs adoption barriers.

This study adopted an explanatory sequential design by combining the advantages of quantitative and qualitative data. Data collection methods include literature review, a pilot study, questionnaire survey, and semi-structured interviews. Questionnaire data were analysed by using SPSS and multivariate regression technique. The interview data were processed by using content analysis to validate and supplement findings from the questionnaire.

Based on the survey and interview results, eight critical barriers were identified: the three top critical barriers are (1) “status quo industry standards”, (2) “lack of client interest” and (3) “lack of financial need/drive for using DTs”. The eight critical barriers were further classified into technical, environmental, and social dimensions to determine the major constructs that hinder DTs adoption. A theoretical framework articulating critical barriers with underlying components and root causes was also proposed. Furthermore, by using multivariate regression analysis, a model was developed to link the organisational characteristics with barriers to DTs adoption.

By referring to the framework and the model developed, academics, industry practitioners, and decision makers can identify pivotal areas for improvement, make informed decisions and implement remedial measures to remove the barriers to digitalisation transformation.

This study contributes to the literature on construction innovations by investigating barriers to DTs adoption holistically as well as perceptions of the impact of organisational attributes on these barriers. It establishes the groundwork for future empirical research into the strategic consolidation of movement of DTs adoption and diffusion.

The ability to use laser powder bed fusion (LPBF) to print parts with tailored surface topography could reduce the need for costly post-processing. However, characterizing the as-built surface topography as a function of process parameters is crucial to establishing linkages between process parameters and surface topography and is currently not well understood. The purpose of this study is to measure the effect of different LPBF process parameters on the as-built surface topography of Inconel 718 parts.

Inconel 718 truncheon specimens with different process parameters, including single- and double contour laser pass, laser power, laser scan speed, build orientation and characterize their as-built surface topography using deterministic and areal surface topography parameters are printed. The effect of both individual process parameters, as well as their interactions, on the as-built surface topography are evaluated and linked to the underlying physics, informed by surface topography data.

Deterministic surface topography parameters are more suitable than areal surface topography parameters to characterize the distinct features of the as-built surfaces that result from LPBF. The as-built surface topography is strongly dependent on the built orientation and is dominated by the staircase effect for shallow orientations and partially fused metal powder particles for steep orientations. Laser power and laser scan speed have a combined effect on the as-built surface topography, even when maintaining constant laser energy density.

This work addresses two knowledge gaps. (i) It introduces deterministic instead of areal surface topography parameters to unambiguously characterize the as-built LPBF surfaces. (ii) It provides a methodical study of the as-built surface topography as a function of individual LPBF process parameters and their interaction effects.

In this paper, we address the need to study automatic propaganda detection to establish a course of action when faced with such a complex task. Although many isolated tasks have been proposed, a roadmap on how to best approach a new task from the perspective of text formality or the leverage of existing resources has not been explored yet.

We present a comprehensive study using several datasets on textual propaganda and different techniques to tackle it. We explore diverse collections with varied characteristics and analyze methodologies, from classic machine learning algorithms, to multi-task learning to utilize the available data in such models.

Our results show that transformer-based approaches are the best option with high-quality collections, and emotionally enriched inputs improve the results for Twitter content. Additionally, MTL achieves the best results in two of the five scenarios we analyzed. Notably, in one of the scenarios, the model achieves an F1 score of 0.78, significantly surpassing the transformer baseline model’s F1 score of 0.68.

After finding a positive impact when leveraging propaganda’s emotional content, we propose further research into exploiting other complex dimensions, such as moral issues or logical reasoning.

Based on our findings, we provide a roadmap for tackling propaganda-related tasks, depending on the types of training data available and the task to solve. This includes the application of MTL, which has yet to be fully exploited in propaganda detection.

The purpose of this study is to present a systematic review of the effects of COVID-19 on the conventional textile production subsector. The emergence of the COVID-19 virus in 2019 has subsequently caused many problems, such as unemployment, business closures, economic instability and high volatility in the global capital markets amongst others within the wider manufacturing industry including textile production.

Relevant secondary data are obtained from the Scopus database and Statista. Based on the data analysis of 21 seed articles, three research themes are identified: challenges in the textile industry, new material innovations or solutions and the textile industry performance.

The results reveal that the COVID-19 pandemic has affected the textile industry, disrupted the supply chains of this industry, affected profit margins, stopped employment and impacted the retail of products to customers. Aside from the negative repercussions, there are also good sides to the pandemic which, for instance, range from advanced material innovations to textiles with anti-microbial, self-cleaning and anti-bacterial properties that would limit the transfer of the virus.

Findings reinforced the need for effective strategies and investments in the research and development departments of the various firms in the textile industry to innovate operations and novel materials for the next global pandemic.

Many companies have adopted novel strategies and practices that are helping them to survive the pandemic. This study, therefore, recommends further investigation into material innovations and reimagining strategies by companies and the supply chain within the textile industry so that it is protected against future crises.