Search results

The purpose of this study is to prepare thermal transfer ribbons with good alcohol resistance.

A variety of alcohol-resistant thermal transfer inks were prepared using different polyester resins. The printing temperature, printing effect, adhesion and alcohol resistance of the inks on the label were studied to determine the feasibility of using the ink for manufacturing thermal transfer ribbons. The ink formulations were prepared by a simple and stable grinding technology, and then use mature coating technology to make the ink into a thermal transfer ribbon.

The results show that the thermal transfer ink has good scratch resistance, good alcohol resistance and low printing temperature when the three resins coexist. Notably, the performance of the ribbon produced by 500 mesh anilox roller was better than that of other meshes. Specifically, the ink on the matte silver polyethylene terephthalate (PET) label surface was wiped with a cotton cloth soaked in isopropyl alcohol under 500 g of pressure. After 50 wiping cycles, the ink remained intact.

The proposed method not only ensures good alcohol resistance but also has lower printing temperature and wider label applicability. Therefore, it can effectively reduce the loss of printhead and reduce production costs, because of the low printing temperature.

For the multi-stage and multi-attribute risk group decision-making problem, the attribute weight, decision-maker weight and time weight are unknown. The attribute value is grey information. The purpose of this paper is to discuss a decision-making method.

Analysis techniques and the theory about distance degree are used to determine the decision-maker weight within single stage. Grey relational analysis method is applied to determine the attribute weight. Moreover, the uncertainty of time weight and the proximity between the attribute value and positive/negative value are taken into account. A multi-objective optimization model is established based on maximum entropy to obtain time weights, so the comprehensive value is determined.

An example shows the effectiveness and practicability.

For a decision-making process, the results are different in different periods. This method is computationally very simple, easily comprehensible.

The Chemical Integrated Information Service Network (Chl2Net) is a comprehensive information service system which includes chemical, technical, economic, market, news and management information based on computer and modern communication technology, and built by the China National Chemical Information Centre (CNCIC). This system provides varied services for users both at home and abroad through an online service, a hotline call service, a consulting service and publishing service.

The paper sets out to understand the key issues that the various functions and optimal allocation of NGOs (non-governmental organizations) in the circular economy that provide public services depend not only on external quantities or densities but also on their internal size of human resources.

The paper uses different data samples and models to study the influence mechanism of optimal NGO size of human resources and its differentiated effects on governance quality of entrepreneurship.

The authors find that a reduction in transaction costs and an increase in the aggregation degree of public demand lead to increased human capital and lower financial capital intensity. In addition, the authors find that NGO size of human resources has a relationship that is approximately U-shaped (or inverse U-shaped) with the governance quality of entrepreneurship.

The paper discusses the implications for programs that encourage NGOs to optimally determine their internal size of human resources and further improve the governance quality of entrepreneurship in the circular economy.

The paper reveals the significant nonmonotonic relationship between local governance quality and NGO financial size, even after controlling for other NGO, city and provincial characteristics.

The majority of Hong Kong filmmakers have pursued co-production with China filmmakers for having the Mainland market at the expense of local styles and sensitivities. To many critics, the two-part series of Ip Man and Ip Man II provide a paradigmatic case of film co-production that sell the tricks of Chinese kung fu, regurgitating the overblown Chinese nationalism against Japanese and kwai-lo. The purpose of this study is to rectify such observation of the Ip Man series.

The authors read the series deconstructively as a postcolonial text in which Hong Kong identity is inscribed in the negotiated space in between different versions of Chinese nationalism.

The analysis points to the varying subversive features in the series from which Hong Kong’s colonial experiences are tacitly displayed, endorsed and rewritten into the Chinese nationalistic discourse whose dominance is questioned, if not debased.

This paper advances new research insights into the postcolonial reinvention of kung fu film and, by implication, the Hong Kong cinema in general.

This paper aims to present a new topology method in designing the lightweight and complex structures for 3D printing.

Computer-aided design (CAD) and topology design are the two main approaches for 3D truss lattices designing in 3D printing. Though these two ways have their own advantages and have been used by the researchers in different engineering situations, these two methods seem to be incompatible. A novel topology method is presented in this paper which can combine the merits of both CAD and topology design. It is generally based on adding materials to insufficient parts in a given structure so the resulting topology evolves toward an optimum.

By using the topology method, an optimized-Kagome structure is designed and both 3D original-Kagome structure and 3D optimized-Kagome structure are manufactured by fused deposition modeling (FDM) 3D printer with ABS and the compression tests results show that the 3D optimized-Kagome has a higher specific stiffness and strength than the original one.

The presented topology method is the first work that using the original structure-based topology algorithm other than a boundary condition-based topology algorithm for 3D printing lattice and it can be considered as general way to optimize a commonly used light-weight lattice structure in strength and stiffness.

This paper aims to propose a design method for attenuating stress waves pressure using soft matrix embedded with particles.

Based on the phononic crystal theory, the particle composed of hard core and soft coating can form a spring oscillator structure. When the frequency of the wave is close to the resonance frequency of the spring oscillator, it can cause the resonance of the particle and absorb a lot of energy. In this paper, the resonant phononic crystal with three phases, namely, matrix, particle core and coating, is computationally designed to effectively mitigate the stress wave with aperiodic waveform.

The relationship between the center frequency and width of the bandgap and the geometric and physical parameters of particle core are discussed in detail, and the trend of influence is analyzed and explained by a spring oscillator model. Increasing the radius of hard core could effectively enhance the bandgap width, thus enhancing the effect of stress wave attenuation. In addition, it is found that when the wave is in the bandgap, adding viscosity into the matrix will not further enhance the stress attenuation effect, but will make the stress attenuation effect of the material worse because of the competition between viscous dissipation mechanism and resonance mechanism.

This study will provide a reference for the design of stress wave protection materials with general stress waves.

This study proposes a design method for attenuating stress waves pressure using soft matrix embedded with particles.

Building on social media and destination brand-related literature, this study aims to explore World Heritage Sites’ (WHSs) brand diffusion and formation process from long-term and short-term perspectives, which includes brand diffusion, user-generated content (UGC), opinion leaders and brand events’ impact.

This study uses a mixed-method including text mining, keyword analysis and social network analysis to explore the brand formation process of four popular WHSs in Beijing, namely, the Palace Museum, Great Wall, Summer Palace and Temple of Heaven and more than 10,000,000 users’ data on Sina Weibo has been implemented to uncover the underlying social media branding mechanism.

The results show that the number of postings keeps in a stable range in most months, but, in general, there are no common rules for changing trends among the four WHSs; long-term high-frequency keywords related to history and culture account for a higher percentage; different kinds of accounts have varying impacts on information diffusion, in which media accounts lead to a bigger influence. However, more followers do not necessarily mean more interactions and most of the interaction ratio is much lower than 0.01000; brand events facilitate brand dissemination and have an impact on the creation of UGC.

This study is valuable for destination marketers to deeper understand brand diffusion and formation and provides valuable insights for developing effective destination marketing strategies.

Unlike previous studies that only concern a few parts of destination brand formation via social media (e.g. brand diffusion, brand events or opinion leaders’ impact), this study takes a more comprehensive perspective by systematically analyzing the brand formation process of WHSs on social media. By considering both long-term diffusion and short-term representative events, this study provides a more holistic understanding of the branding mechanism.

This study examines the role of crowd wisdom in misinformation correction. Going beyond fact-checking, we investigate the mechanisms underlying laypeople’s participation in misinformation correction. Drawing upon the Norm Activation Model (NAM), this study conceptualizes misinformation correction as a prosocial behavior and examines the impact of various media and social psychological factors on laypeople’s motivations to engage misinformation correction behavior.

Through a national survey of 1,022 respondents, we explore the norm activation process triggered by the perceived prevalence of online misinformation, which directly and indirectly impacts online misinformation correction intentions via awareness, norms, and efficacy. This mechanism was tested using structural equation modeling.

This study found that perceived prevalence of misinformation, self-efficacy, and outcome efficacy play multilayered roles in shaping misinformation correction intentions. The effects were mediated by the activation of personal norms, which showed the strongest direct relationship with correction intentions. However, these factors also demonstrated direct associations with correction intentions, indicating multiple paths in misinformation correction.

Differing from mainstream fact-checking approaches, this study provides a more comprehensive examination of the mechanisms underlying laypeople’s willingness to engage in social media misinformation correction behaviors. In addition, this study also extends NAM by incorporating media environment (perceived prevalence of online misinformation) into the model, identifying more paths affecting misinformation correction behaviors.

The peer review history for this article is available at: https://publons.com/publon/10.1108/OIR-09-2023-0437