Search results

The purpose of this paper is to develop an improved adhesion model to better reproduce the low adhesion condition of the anti-skid control for rail vehicles under braking condition.

In view of the low adhesion characteristics for rail vehicles under braking conditions, the Polach adhesion model was improved based on the sliding power and sliding energy. The wheel–rail low adhesion model suitable for braking condition was given. The analysis of braking anti-skid control under emergency braking condition was carried out through the co-simulation, and compared with the test data; the effectiveness and practicability of the improved low adhesion model were verified.

The results showed that the improved adhesion model is simple and efficient and the parameters involved are less, and it can be directly applied to the real-time simulation of anti-skid control in the process of train braking.

This paper can provide a theoretical reference for the reasons of change and improvement of adhesion between wheel and rail caused by the adjustment of braking force under anti-skid control, which can fulfill a need to the study of sliding energy on the contact surface, the removal effect of pollutants on the wheel–rail surface and the improvement and recovery of adhesion caused.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-07-2020-0244/

This paper aims to deduce a set of theory computational formula, and optimize and improve the heat conductivity of vias in printed circuit boards of electrical power apparatus.

The authors adopted numerical simulation and experimental measurement to verify the reliability of this formula.

Research result showed that 0.45 mm was the optimal bore diameter of vias; the conductivity had no obvious improvement when filling material was FR4 or Rogers, but if it was filled with texture of high thermal conductivity like soldering tine, the conductivity would improve a lot; the plating thickness of vias had a greater influence on thermal conductivity.

Through the theory computational formula, this paper studied the influence of aperture of vias, filled materials and thickness of copper plated on vias on thermal conductivity.

The purpose of this paper is to use the redundancy of a new hybrid automatic fastening system (HAFS) for aircraft assembly in the best way.

First, the kinematic model of HAFS is divided into three sub-models, which are the upper/lower tool and parallel robot. With the geometric coordination relationship, a comprehensive kinematic model of the HAFS is built by mathematically assembling the sub-models based on the DH method. Then, a novel master-slave decoupling strategy for inverse kinematics solution is proposed. With the combination of the minimum energy consumption and the comfortable configuration, a multi-objective redundancy resolution method is developed to optimize the fastening configuration of the HAFS, which keep the HAFS away from the joint-limits and collision avoiding in the aircraft panel assembly process.

An efficient multi-objective posture optimization algorithm to use the redundancy in the best way is obtained. Simulation and an experiment are used to demonstrate the correctness of the proposed method. Moreover, the position and orientation errors of the drilling holes are within 0.222 mm and 0.356°, which are accurate enough for the automatic fastening in aircraft manufacturing.

This method has been used in the HAFS control system, and the practical results show the aircraft components can be fastened automatically through this method with high efficiency and high quality.

This paper proposes a comprehensive kinematic model and a novel decoupling strategy for inverse kinematic solution of the HAFS, which provides a reference to utilize the redundancy in the best way for a hybrid machine with redundant function.

This paper aims to establish the downhole CO₂ partial pressure profile calculating method and then to make an economical oil country tubular goods (OCTG) anti-corrosion design. CO₂ partial pressure is the most important parameter to the oil and gas corrosion research for these wells which contain sweet gas of CO₂. However, till now, there has not been a recognized method for calculating this important value. Especially in oil well, CO₂ partial pressure calculation seems more complicated. Based on Dolton partial pressure law and oil gas separation process, CO₂ partial pressure profile calculating method in oil well is proposed. A case study was presented according to the new method, and two kinds of corrosion environment were determined. An experimental research was conducted on N80, 3Cr-L80 and 13Cr-L80 material. Based on the test results, 3Cr-L80 was recommended for downhole tubing. Combined with the field application practice, 3Cr-L80 was proved as a safety and economy anti-corrosion tubing material in this oil field. A proper corrosion parameter (mainly refers to CO₂ partial pressure and temperature) can ensure a safety and economy downhole tubing anti-corrosion design.

Based on Dolton partial pressure law and oil gas separation process, CO₂ partial pressure profile calculating method in oil well is proposed. An experimental research was conducted on N80, 3Cr-L80 and 13Cr-L80 material. A field application practice was used.

It is necessary to calculate the CO₂ partial pressure properly to ensure a safety and economy downhole tubing (or casing) anti-corrosion design.

The gas and oil separation theory and corrosion theory are combined together to give a useful method in downhole tubing anti-corrosion design method.

The purpose of this paper is to design the novel oil–air distributor (N-OAD). Its structure design, oil feeding reliability, service life and viscosity properties of air bubble (AB) oil were analyzed. Meanwhile, the formation mechanism of AB oil was established based on Kelvin–Helmholtz instability.

First, oil–air distributor (OAD) and N-OAD were randomly selected for testing when the air pressure was 0.25 MPa and oil feeding was 100 times per hour. Then, the bubbles were found in the lubricant during the experiment, and the void fraction and viscosity properties of AB oil were tested by image processing method and the MARS 40 rheometer, respectively.

N-OAD has longer service life and higher working reliability than OAD. The key factors of AB oil formation were air pressure and oil feeding. And the void fraction of AB oil has different results on the viscosity at high and low shear rates.

The outcome of this research paper gives an insight to improve the reliability of oil–air lubrication systems and the safety factor of machine tool spindle operation.

A novel asynchronous network-based model is proposed in this paper for the sentiment analysis of online public opinions. This new model provides a new approach to analyze the evolution characteristics of online public opinion sentiments in complex environment.

Firstly, a new sentiment analysis model is proposed based on the asynchronous network theory. Then the graphical evaluation and review technique is employed and extended to design the model-based sentiment analysis algorithms. Finally, simulations and real-world case studies are given to show the effectiveness of the proposed model.

The dynamics of online public opinion sentiments are determined by both personal preferences to certain topics and the complex interactive influences of environmental factors. The application of appropriate quantitative models can improve the prediction of public opinion sentiment.

The proposed model-based algorithms provide simple but effective ways to explore the complex dynamics of online public opinions. Case studies highlight the role of government agencies in shaping sentiments of public opinions on social topics.

This paper proposes a new asynchronous network model for the dynamic sentiment analysis of online public opinions. It extends the previous static models and provides a new way to extract opinion evolution patterns in complex environment. Applications of the proposed model provide some new insights into the online public opinion management.

This paper aims to investigate the differences in hot corrosion behavior of the GTD222 superalloy and TiC/GTD222 composite in a mixed salt of 75% Na₂SO₄ and 25% K₂SO₄ at 900°C.

The GTD222 superalloy and TiC/GTD222 nickel-based composite were prepared using selective laser melting (SLM). Subsequently, the hot corrosion behavior of the two alloys was systematically investigated in a salt mixture consisting of 75% Na₂SO₄ and 25% K₂SO₄ (Wt.%) at 900°C.

The TiC/GTD222 composite exhibited better hot corrosion resistance compared to the GTD222 superalloy. First, the addition of alloying elements led to the formation of a protective oxide film on the TiC/GTD222 composites 20 h before hot corrosion. Second, TiC/GTD222 composite corrosion surface has a higher Ti content, after 100 h of hot corrosion, the composite corrosion surface Ti content of 10.8% is more than two times the GTD222 alloy 4% Ti. The Ti and Cr oxides are tightly bonded, effectively resisting the erosion of corrosive elements.

The hot corrosion behavior of GTD222 superalloy and TiC/GTD222 composites prepared by SLM in a mixed salt of 75% Na₂SO₄ and 25% K₂SO₄ was studied for the first time. This study provides insights into the design of high-temperature alloys resistant to hot corrosion.