Yanhong Yan, Chengwen Yang, Wenbin Dong, Pengjuan Yan, Peilong Wang, Xiaocui Yan and Zhining Jia
This paper aims to investigate the tribological properties of polytetrafluoroethylene (PTFE) composites modified by nano-serpentine and nano-lanthanum oxide in a seawater…
Abstract
Purpose
This paper aims to investigate the tribological properties of polytetrafluoroethylene (PTFE) composites modified by nano-serpentine and nano-lanthanum oxide in a seawater environment.
Design/methodology/approach
In this paper, seven PTFE composites were prepared by unified design method and vacuum thermoforming method, and their hardness, water absorption and tribological properties were measured under seawater environment. The modification effects and thermal stability of the materials were analyzed by Fourier transform infrared spectroscopy, thermal gravimetry and differential scanning calorimetry. This paper analyzed the wear mechanism of PTFE composites by scanning electron microscopy and energy spectroscopy.
Findings
The results showed that the hardness of the PTFE composites were all improved, but the water absorption was increased with the increase of additives. The modification of nano-serpentine was successful and the thermal stability of PTFE composites was better. The lowest coefficient and minimum wear rate are 0.0267 and 8.67 × 10−5 · mm3 · (N · m)−1 respectively, which is 34.9% and 76% less than the pure PTFE.
Originality/value
The analysis showed that the wear mechanism of PTFE composites was abrasive wear and a small amount of adhesive wear, and when the additive content was appropriate, it easily formed a transfer film on the surface mating parts.
Details
Keywords
Yanhong Yan, Chengwen Yang, Yanfei Zhou, Wenbin Dong, Pengjuan Yan and Zhining Jia
Previously, the effect of pore-forming agents on the properties of pore size and morphology was studied. In this paper, we determine the optimal combination of parameters by…
Abstract
Purpose
Previously, the effect of pore-forming agents on the properties of pore size and morphology was studied. In this paper, we determine the optimal combination of parameters by tensile strength and perform tribological tests with optimal combination of parameters.
Design/methodology/approach
In this paper, porous polyimide (PI) materials were fabricated using vacuum hot molding technology. The orthogonal experiment was designed to test the mechanical properties of porous PI materials with the process parameters and the content of pore-forming agent as the changing factors. The porous PI oil-bearing materials were obtained by vacuum immersion, and tribological test were carried out.
Findings
The results showed that porous PI oil-bearing materials are suitable for low-speed and low-load conditions. The actual value of the friction coefficient basically match with the theoretical value of the regression analysis, and the errors of the friction coefficient are within 10% and 3%, respectively, which proves that the method used in the study is feasible for the friction coefficient prediction.
Originality/value
In this paper, we have produced a new porous oil-bearing material with good tribological properties. This study can effectively predict the friction coefficient of PI porous material.