Search results

This study aims to investigate the tensile strength and compressive behaviour of two thermoplastic polyurethane (TPU) filaments produced via material extrusion (ME): TPU 95A and Reciflex (recycled).

Tensile strength and compressive behaviour are assessed. The influence of extrusion temperature and infill pattern on these properties is examined, supported by thermal characterization, surface morphology analyses and a comprehensive comparison with existing literature. An analytical method is presented for estimating the solid ratio of ME parts, using an ellipse model to describe the material bead geometry.

Reciflex is generally stiffer than TPU 95A in both tensile and compressive tests. Specimens loaded orthogonally in compression tests exhibited stiffer behaviour than those loaded parallelly, and higher tensile properties were typically observed when material beads were deposited parallel to the load direction. Unlike TPU 95A, Reciflex is sensitive to extrusion temperature variations.

By comparing recycled and virgin TPU filaments, this research addresses waste management concerns and advocates for environmentally sustainable production practices in the broadly used filament/based ME technique.

This study provides an extensive comparison of computed values with existing literature, offering insights into how different materials may behave under similar processing conditions. Given ongoing challenges in controlling melt flow during extrusion, these results may offer insights for optimizing the production of ME parts made with thermoplastic elastomers.

Numerical simulation of polymer injection processes has become increasingly common in mould design. In industry, such a task is accomplished mainly by using commercial packages. Owing to the complexities inherent of this class of problems, most commercial codes attempt to combine realistic rheological descriptions with simplified numerical models. In spite of the apparent success, such approaches are not able to capture important aspects of the flow topology. The present work aims to describe a more elaborate mathematical model based on finite volumes which is able to provide both accurate solutions and further insights on the physics of the polymer flow.

The mathematical model comprises the momentum and energy equations and a Poisson equation for pressure to impose the incompressibility constraint. The governing equations are discretized using the finite volume method based on central, second‐order accurate formulas for both convection and diffusion terms. Artificial dissipation terms are added externally in order to control the odd‐even decoupling problem.

The numerical model was conceived within the framework of a generalized Newtonian formulation. The capability of the numerical scheme is illustrated by simulations using three distinct constitutive relations to approach the non‐Newtonian behaviour of the polymer melt: isothermal power‐law, modified Arrhenius power‐law and cross models.

This paper extends the computational strategies previously developed to Newtonian fluids to account for more complex constitutive relations. The velocity and temperature coupled solution for polymer melts using only second‐order accurate formulas constitute also a relevant contribution.

Parameter identification is a technique which aims at determining material or other process parameters based on a combination of experimental and numerical techniques. In recent years, heuristic approaches, such as genetic algorithms (GAs), have been proposed as possible alternatives to classical identification procedures. The present work shows that particle swarm optimization (PSO), as an example of such methods, is also appropriate to identification of inelastic parameters. The paper aims to discuss these issues.

PSO is a class of swarm intelligence algorithms which attempts to reproduce the social behaviour of a generic population. In parameter identification, each individual particle is associated to hyper-coordinates in the search space, corresponding to a set of material parameters, upon which velocity operators with random components are applied, leading the particles to cluster together at convergence.

PSO has proved to be a viable alternative to identification of inelastic parameters owing to its robustness (achieving the global minimum with high tolerance for variations of the population size and control parameters), and, contrasting to GAs, higher convergence rate and small number of control variables.

PSO has been mostly applied to electrical and industrial engineering. This paper extends the field of application of the method to identification of inelastic material parameters.

Gives a bibliographical review of the finite element methods (FEMs) applied for the linear and nonlinear, static and dynamic analyses of basic structural elements from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore aims to give the reader an encyclopaedic view on the subject. The bibliography at the end of the paper contains 2,025 references to papers, conference proceedings and theses/dissertations dealing with the analysis of beams, columns, rods, bars, cables, discs, blades, shafts, membranes, plates and shells that were published in 1992‐1995.

The purpose of this paper is to provide an organizing lens for viewing the distinct contributions to knowledge production from those research communities addressing the impact of competitive strategy on company performance in general, and the influence of cost leadership and differentiation strategy on organizational performance in detail.

The research methodology was based on the PRISMA review, and thematic analysis based on an iterative process of open coding was analyzed and then the sample was analyzed by illustrating the research title, objectives, method, data analysis, sample size, variables and country.

The main factor that influenced the competitive strategy is strategic growth; strategic growth has a significant influence on competitive strategy. Furthermore, competitive strategy will boost firm network, performance measurement and organization behavior. In the same way, the internal goal factor will enhance organizational effectiveness. Also, a differentiation strategy will support management practice factors, strategic positions, product price, product characteristics and company performance.

This study contributes to the literature by identifying a framework of competitive strategy factors, company performance factors, cost leadership strategy factors, differentiation strategy factors and competitive strategy with global market factors. This study provides a complete picture and description of the resulting body knowledge in competitive strategy and organizational performance.

The goal of this work is to create a computational finite element model to perform thermoelastic stress analysis (TSA) with the usage of a non-ideal load frequency, containing the effects of the material thermal properties.

Throughout this document, the methodology of the model is presented first, followed by the procedure and results. The last part is reserved to results, discussion and conclusions.

This work had the main goal to create a model to perform TSA with the usage of non-ideal loading frequencies, considering the materials’ thermal properties. Loading frequencies out of the ideal range were applied and the model showed capable of good results. The created model reproduced acceptably the TSA, with the desired conditions.

This work creates a model to perform TSA with the usage of non-ideal loading frequencies, considering the materials’ thermal properties.

The purpose of this paper is to present a study on the application of four damage factors to several single and multiple damage scenarios of aluminium beams. Each one of these damage factors is defined by the information given by modal curvatures of the beams.

The methodology consisted of a first experimental stage in which the modal rotations were measured with shearography and a subsequent numerical analysis in order to obtain the modal curvatures. To this end, three finite difference formulae were applied. The modal curvatures were then used to calculate the damage factors.

It was found that the profile of the damage factors varies according to the finite difference formula used. In view of the findings, the differences among the damage factors analysed are highlighted and some final recommendations to improve damage identifications via modal curvature-based are presented.

To the best of the authors’ knowledge, the application and comparison of several finite difference formulae and corresponding optimal sampling has not been carried out before. With the proposed approach, it is possible to identify multiple damages, which is still a great challenge. The post-processing of shearography measurements with a numerical method, which is inherently a multidisciplinary approach, is also a substantial improvement upon other type of approaches found in the literature.

The purpose of this paper is to investigate the effect of a sealing protective treatment on the water absorption and mechanical properties of acrylonitrile butadiene styrene (ABS)-printed parts by fused deposition modelling. Protective products include aqueous acetone solutions with different concentrations, polyurethane wood sealer and aqueous acrylic-based varnish.

Open porosity was estimated by the absorption coefficient and the total amount of water retained, obtained from water absorption tests. Mechanical characterization was performed by compressive and tensile tests. Different specimens with different build directions and raster angles were used.

The treatments with acetone solutions were not effective in reducing the porosity of ABS parts, as the amount of acetone that reduces effectively the porosity will also affect the sample dimensional stability. The polyurethane treatment was found to reduce the absorption coefficient, but the maximum water content and the open porosity remain almost unchanged in comparison with the ones obtained for untreated specimens. The treatment with an acrylic-based varnish was found to preserve the dimensional stability of the specimens, to reduce the open porosity and to maintain the compression and tension properties of the specimens in different build directions and raster angles.

Surface modification for water tight applications of ABS 3D printing parts enables new designs where both sealing and the preservation of mechanical properties are important. As per the knowledge of the authors, the water absorption and the mechanical behaviour of ABS 3D printed parts, before and after treatment, were not previously investigated.

The purpose of this study is to develop and empirically test the student engagement scale and to understand the factors that contribute to student engagement at higher educational institutions.

The investigation started with a rummage for variables, available in the literature, 59 in numbers, which were then used to collect data from a sample of university students in Lahore, Pakistan. An exploratory factor analysis (EFA) was applied to develop an initial structure of the construct. A confirmatory factor analysis (CFA) was then conducted to confirm the reliability and validity of these factors for the student engagement construct.

It has been found that factors, predominantly social and exogenous to the classroom environment, such as campus atmosphere and facilities, are more responsible for creating engagement among students at higher educational institutions of Pakistan.

This is one of the pioneer studies for developing a student engagement scale for measuring the students' engagement in higher educational institutions. The authors believe that the scale developed in this study contributes substantially to the student engagement literature. Limitations, future research directions and implications are discussed.