Search results

The purpose of this paper is to purify the wastewater in the garment industry.

The preparation of the calcium alginate (CA)/activated carbon (AC) composite membrane was achieved by vacuum freeze-drying and the cross-linking reaction between sodium alginate and CaCl₂. Effective parameters in the methylene blue (MB) adsorption such as temperature, dose, contact time and pH were discussed. The adsorption properties of the composite membrane were investigated by isotherm, kinetics and thermodynamic analysis. The adsorption equilibrium data were described by the adsorption isotherm Langmuir model and the Freundlich model. The pseudo-first-order, pseudo-second-order and intra-particle diffusion equations were selected to evaluate the kinetics. The thermodynamic study described that the adsorption reaction was spontaneous and exothermic.

The AC/CA membrane is an efficient and powerful adsorbent to remove MB in printing and dyeing wastewater, and provides a new idea for the selection of adsorption materials for industrial printing and dyeing wastewater.

The composite membrane research on CA and AC can provide new ideas for the research of these kinds of materials.

The paper contributes to its wider and convenientapplication in wastewater treatment.

Studies on the combination of CA and AC into adsorption membranes and for the removal of dyes from printing and dyeing wastewater have not been reported. A novel composite material is provided for treatment dyeing wastewater in garment production. The composite membrane research on CA and AC can provide new ideas for the research of these kinds of materials and contribute to its wider and convenient application in wastewater treatment.

In order to discover a new adsorbent that can be used to purify dye wastewater in the textile and apparel industry, a novel type of graphene oxide/gluten composite material using an improved acid bath coagulation method was synthesized, which can remove methylene blue in an aqueous environment.

After experimentally compounding different ratios of graphene oxide and gluten, the graphene oxide/gluten composite material with 20% graphene oxide content and superlative adsorption effect was chosen. The synthesized material was characterized by different techniques such as FT-IR and SEM, indicating the microstructure of the material and the success of the composite. Various factors were considered, namely, the influence of temperature, dosage, pH and contact time. The isotherms, kinetics and thermodynamic parameters were successively discussed.

The qmax value of 214.29 mg/g of the material was higher compared to the general sorbent, thus, the graphene oxide/gluten composite material was a suitable sorbent for methylene blue removal. Overall, the graphene oxide/gluten composite material can be considered as an effectual and prospective adsorbent to remove methylene blue in the textile and apparel industrial effluent.

Graphene oxide is a potentially excellent sorbent. However, the high dispersibility of GO is detrimental to adsorption, it disperses rapidly in an aqueous solution making separation and recovery difficult. The high load capacity and recyclability of gluten as a colloid make it a suitable carrier for fixing GO. Studies on the combination of GO and GT into composite adsorption material and for the removal of dyes from dyeing wastewater have not been reported. The composite material research on GO and GT can provide new ideas for the research of these kinds of materials and contribute to its wider and convenient application in wastewater treatment.

The purpose of this paper is to study the effect of doping, annealing temperature and visible optical excitation on CuO-ZnO nanocomposites’ acetone sensing properties and introduce an attractive candidate for acetone detection at about room temperature.

ZnO nanoparticles doped with CuO were prepared by sol-gel method, and the structure and morphology were characterized via X-ray diffraction, scanning electron microscope, energy dispersive spectroscopy and Brunauer-Emmett-Teller. The photoelectric responses of CuO-ZnO nanocomposites to cetone under the irradiation of visible light were investigated at about 30°C. The photoelectric response mechanism was also discussed with the model of double Schottky.

The doping of CuO enhanced performance of ZnO nanoparticles in terms of the photoelectric responses and the gas response and selectivity to acetone of ZnO nanoparticles, in addition, decreasing the operating temperature to about 30ºC. The optimum performance was obtained by 4.17% CuO-ZnO nanocomposites. Even at the operating temperature, about 30ºC, the response to 1,000 ppm acetone was significantly increased to 579.24 under the visible light irradiation.

The sensor fabricated by 4.17% CuO-ZnO nanocomposites exhibited excellent acetone-sensing characteristics at about 30ºC. It is promising to be applied in low power and miniature acetone gas sensors.

In the present research, a new nanocomposite material of CuO-ZnO was prepared by Sol-gel method. The optimum gas sensing properties to acetone were obtained by 4.17% CuO-ZnO nanocomposites at about 30ºC operating temperature when it was irradiated by visible light with the wavelength more than 420 nm.

This paper aims to develop a new magnetorheological polishing (MRP) device with roller and investigate the polishing mechanism of MRP fluids using this new device.

The principle of MRP process with roller is discussed, and then the structure of the polishing device is designed in detail. The polishing experiments of K9 glass are carried out using MRP device with roller.

A series of tests are performed to evaluate the effect of the excitation gaps, working gap and polishing time on the polishing characteristics, and the optimized polishing parameters can be obtained. The surface roughness Ra of the sample is reduced from 359 to 38 nm under optimized polishing parameters.

MRP method with roller is proposed in this paper, and the MRP device with roller can reduce the surface roughness Ra significantly. After being polished, the circular ring-shaped polishing belt disappears on the workpiece surface, which means it has great potential for polishing.

The purpose of this paper is to examine information-seeking behavior (ISB) of strategic planners in enterprise across different work-task types and stages.

A case study was conducted in a pharmaceutical company in China, labeled as T Company. One of the authors worked in the department of strategic planning of this company as an intern. The data were collected via participant observation and unstructured in-depth interviews. Open coding was performed to analyze the data.

Four work-task stages were identified: project preparation, gathering, discovery and presentation, and strategy formulation. The results indicate that work-task types, work-task stages, and strategic planners’ work role or position affect their information needs, source selection, and seeking process. Task complexity, task familiarity, and task goal are of the most important task attributes that directly shape strategic planners’ ISB. Work role determines the extent to which strategic planners can access the information of the company. Internal information has priority, but external information is also important when internal information is not sufficient; both are equally important for strategic planning projects. Social media has been a very important channel to access, disseminate and share information. Workshops are an important approach to producing final project reports. Face-to-face discussion and information exchange play a critical role in the formulation of new strategies.

This is a case study with data collected from only one company in China. Some of the results may not be generalizable. However, it adds new knowledge to ISB research in enterprise, informs people how to provide better information services for strategic planners, and informs MBA education for students’ better information-seeking skills.

Though myriad studies on ISB, little research has been done to examine strategic planners’ ISB from a business context, especially taking into account the effect of work-task types and stages.

The purpose of this paper is to propose a fractional order optimization method based on perturbation bound and gamma function of a DGM(r,1).

By analyzing and minimizing perturbation bound, the sub-optimal solution on fractional order interval is obtained through offline solving without iterative calculation. By this method, an optimized fractional order non-equidistant ROGM (OFONEROGM) is applied in fitting and prediction water quality parameters for a surface water pollution monitoring system.

This method can narrow fractional order interval in this work. In a surface water pollution monitoring system, the fitting and prediction performances of OFONEROGM are demonstrated comparing with integer order non-equidistant ROGM (IONEROGM).

A method of offline solving the sub-optimal solution on fractional order interval is proposed. It can narrow the optimized fractional order range of NEROGM without iterative calculation. A large number of calculations are eliminated. Besides that, optimized fractional order interval is only related to the number of original data, and convenient for practical application. In this work, an OFONEROGM is modeled for predicting water quality trend for preventing water pollution or stealing sewage discharge. It will provide guiding significance in water quality parameter fitting and predicting for water environment management.

The purpose of this paper is to make compliant training control of exoskeleton for ankle joint with electromyograph (EMG)-torque interface.

A virtual compliant mapping which is modeled by mass-spring-damper system is incorporated into the whole system at the reference input. The EMG-torque interface contains both data acquisition and torque estimator/predictor, and extreme learning machine is utilized for joint torque estimation/prediction from multiple channels of EMG signals.

The reference ankle joint angle to follow is produced from the compliance mapping whose input is the measured/predicted torque on healthy subjects. The control system works well with the desired angle to track. In the actuation level, the input torque to drive the ankle exoskeleton is less than the actual torque of the subject(s). This may have positive influence on diminishing overshoot of input torque from motors and protect the actuators. The torque prediction and final tracking control performance demonstrate the efficiency of the presented architecture.

This work can be beneficial to compliant training of ankle exoskeleton system for pilots and enhance current training control module in rehabilitation.

The purpose of this paper is to design a model-based bilateral teleoperation method to improve the feedback force and velocity/position tracking for robotic-assisted tasks (such as palpation, etc.) under constant and/or varying time delay with environment dynamic property. Time delay existing in bilateral teleoperation easily destabilizes the system. Proper control strategies are able to make the system stable, but at the cost of compromised performance. Model-based bilateral teleoperation is designed to achieve enhanced performance of this time-delayed system, but an accurate model is required.

Viscoelastic model has been used to describe the robot tool-soft tissue interaction behavior. Kevin-Boltzmann (K-B) model is selected to model the soft tissue behavior due to its good accuracy, transient and linearity properties among several viscoelastic models. In this work, the K-B model is designed at the master side to generate a virtual environment of remote robotic tool-soft tissue interaction. In order to obtain improved performance, a self perturbing recursive least square (SPRLS) algorithm is developed to on-line update the necessary parameters of the environment with varying dynamics.

With fast and optimal on-line estimation of primary parameters of the K-B model, the reflected force of the model-based bilateral teleoperation at the master side is improved as well as the position/velocity tracking performance. This model-based design in the bilateral teleoperation avoids the stability issue caused by time delay in the communication channel since the exchanged information become position/velocity and estimated parameters of the used model. Even facing with big and varying time delay, the system keeps stably and enhanced tracking performance. Besides, the fast convergence of the SPRLS algorithm helps to track the time-varying dynamic of the environment, which satisfies the surgical applications as the soft tissue properties usually are not static.

The originality of this work lies in that an enhanced perception of bilateral teleoperation structure under constant/varying time delay that benefits robotic assisted tele-palpation (time varying environment dynamic) tasks is developed. With SPRLS algorithm to on-line estimate the main parameters of environment, the feedback perception of system can be enhanced with stable velocity/position tracking. The superior velocity/position and force tracking performance of the developed method makes it possible for future robotic-assisted tasks with long-distance communication.

This study considers a Lagrange direct way of modal assurance criterion (MAC) values of an undamped system. The mentioned method for the sensitivity analysis of the MAC of a sliding machine working table is more close to the exact solution and time efficient. The paper aims to discuss these issues.

Using the Lagrange multipliers to compute the first and second-order sensitivity analysis of MAC values.

Because of the Lagrange multiplier without considering the number of design parameters, one only needs to perform the calculation once. Compared with the indirect way, the direct way is more effective when the number of design parameters is greater than one. This calculation procedure is simple and accurate, which can be popularized and used.

Engineering structure often requires only some structure design, and most of the sub-structure design variables are not related to each other. In this case, this way is better and more efficient. The direct way can be applied to the dynamic optimization design of large structures, the frequency and the mode sensitivity analysis in the process of model modification.

The topic of impulsive buying has been studied by researchers for nearly 70 years and made a large number of valuable discoveries. However, most of the existing research studies focused on the impulse buying behavior in the context of single person shopping from the perspective of individuals and lack of research on impulse buying behavior in the context of shopping with others from the perspective of communities. Given that consumers' decision-making in the presence of others is significantly different from that when they are alone, it is necessary to probe into the internal mechanism of impulse purchase behavior in the context of shopping with others.

In total three experiments were used to test the hypothesis. Study 1 examines the differences in the motivation of impulsive desire among consumers with different impulsive traits. A total of 240 undergraduates were recruited to participate in the study. The purpose of study 2 is to examine the effect of external attribution on consumer guilt, which leads to the failure of self-control. A total of 256 undergraduate students participated in the study 2. The purpose of study 3 was to test the moderating effect of the intensity of ties on the impact of goal on impulse purchase intention. A total of 240 subjects participated in study 3.

When shopping with companions, consumers with different impulse traits have different initial impulses in the face of temptation, but they may have a similar higher willingness to buy on impulse. There are two reasons: on the one hand, consumers with high-impulsive traits produce a higher desire to buy on impulse driven by hedonistic motivation. In contrast, consumers with low-impulse traits will also have a higher impulse purchase desire driven by prosocial motivation. On the other hand, external attribution can lead to the failure of self-control and impulse purchase behavior. However, the above effects only occur when there is a strong connection between consumers.

First, this paper simulates the phenomenon of impulse purchase in the relational situation through experimental methods; if the research based on the real consumption scenario can be carried out, the research results will be more convincing. Second, whether there are other intermediary mechanisms, such as whether external attribution can affect consumers' self-control through perceived social support, need to be further tested. Finally, it is also necessary to examine the role of other regulatory variables, such as consumers' sense of power, the type of self-construct, etc., and these research clues will further enrich the research on impulsive buying in the context of relationship.

First, businesses can launch more accurate marketing strategies for consumers who are shopping together, find ways to reduce consumers' attention to their own responsibility or fault and guide them to conduct external attribution to their impulsive consumption behavior. The findings also have implications for consumers to control their own impulse purchase behavior. In addition, the results of this study can provide new insights into the government to prevent social crisis and carry out consumer education.

The key contribution of the current research is that, unlike existing studies that focus on the exploration of impulsive buying in the context of single person shopping, this study explores the internal mechanism and causal process on how consumers' impulsive buying behavior occurs when shopping with others. The authors further make a contribution to a self-control theory by demonstrating that external attribution has a negative effect on self-control in relational situations. Finally, this study also finds that the intensity of ties can moderate the impacts of focus goals on impulsive buying behavior.