Table of contents
ANN-based performance prediction of electrical discharge machining of Ti-13Nb-13Zr alloys
Md Doulotuzzaman Xames, Fariha Kabir Torsha, Ferdous SarwarThe purpose of this paper is to predict the machining performance of electrical discharge machining of Ti-13Nb-13Zr (TNZ) alloy, a promising biomedical alloy, using artificial…
Influence of basin water depth in the distillate yield of traditional and developed passive single basin double slope solar still
Naveenkumar R., Shanmugam S., Veerappan ARThe purpose of this paper is to understand the effect of basin water depth towards the cumulative distillate yield of the traditional and developed single basin double slope solar…
Joint inversion of VES and Rayleigh wave data based on improved DE algorithm for near surface exploration
Benna Hu, Laifu Wen, Xuemei ZhouVertical electrical sounding (VES) and Rayleigh wave exploration are widely used in the exploration of near-surface structure, but both have limitations. This study aims to make…
Design and implementation of a novel multi-faceted-efficient pneumatic dual-axis solar tracker
Mohammad Fathi, Roya Amjadifard, Farshad Eshghi, Manoochehr KelarestaghiPhotovoltaic (PV) systems are experiencing exponential growth due to environmental concerns, unlimited and ubiquitous solar energy, and starting-to-make-sense panel costs…
Improving structural performance of concrete beams by U-wrapped basalt fibre: a retrofitting approach
Hamsavathi Kannan, Soorya Prakash K., Kavimani V.The aim of the work is to investigate structural behaviour of reinforced concrete (RF) beam retrofitted with basalt fibre (BF) fabric. The incorporation of BF showed enhancement…
A systematic review on high speed selective jet electrodeposition manufacturing
Vimal Kumar Deshmukh, Mridul Singh Rajput, H.K. NarangThe purpose of this paper is to present current state of understanding on jet electrodeposition manufacturing; to compare various experimental parameters and their implication on…
Analyzing the effect of inoculant addition on the solidification of ductile cast irons using thermal analysis
Bahubali Babanrao Sangame, Y. Prasannatha Reddy, Vasudev D. ShindeThe final properties of ductile iron are decided by the inoculant processing while pouring the melt. The shape and size of nodules generated during solidification are of paramount…
Development of an improved limit pressure equation for structurally distorted thin-walled pressurized 90 degree pipe bends
Raghuraman T., Veerappan AR., Shanmugam S.This paper aims to present the approximate limit pressure solutions for thin-walled shape-imperfect 90° pipe bends. Limit pressure was determined by finite element (FE) limit…
Electric discharge drilling of blind holes in titanium alloy Ti6Al4V
Ravinder Kumar, Sahendra Pal SharmaThis experimental study aims to deal with the improvement of process performance of electric discharge drilling (EDD) for fabricating true blind holes in titanium alloy Ti6Al4V…
Performance analysis of a novel solar cogeneration system for generating potable water and electricity
Subbarama Kousik Suraparaju, Arjun Singh K., Vijesh Jayan, Sendhil Kumar NatarajanThe utilisation of renewable energy sources for generating electricity and potable water is one of the most sustainable approaches in the current scenario. Therefore, the current…
Fluid elastic instability and vortex shedding in finned tube arrays: the effects of tube material and fin density
Pravin Hindurao Yadav, Sandeep R. Desai, Dillip Kumar MohantyThe purpose of this paper is to present investigations on the significant influence of the tube material and fin density on fluid elastic instability and vortex shedding in a…
Modelling and prediction of WEDM parameters for sustainable machining of titanium grade-2 alloy
Eswara Krishna MussadaThe purpose of the study is to establish a predictive model for sustainable wire electrical discharge machining (WEDM) by using adaptive neuro fuzzy interface system (ANFIS)…
The analysis of web opening configuration on cold-formed steel hat purlin under torsion behaviour
Ying Ling Jin, Fatimah De’nan, Kok Keong Choong, Nor Salwani HashimCold-formed steel has been used extensively as secondary elements such as purlins and girts in building frames. Purlin is critical to the structure of the roof because it supports…
Modeling of dam-break flood wave propagation using HEC-RAS 2D and GIS: case study of Taksebt dam in Algeria
Leghouchi AbdelghaniThis study aims to predict the consequences associated with the propagation of the flood wave that may occur after the failure of the Taksebt dam and suggest an efficient…
The magnitude of stress concentration of I-beam with web opening because of lateral-torsional buckling effects
Nor Salwani Hashim, Fatimah De’nanIt is generally known that the perforated section such as the castellated section is good to sustain distributed loads but inadequate to sustain highly concentrated loads…
Concept development, design and validation of a novel continuous casting equipment
Prasenjit Biswas, Deepak Patel, Archana Mallik, Sanjeev DasThe purpose of this paper is to develop a concept and design to cast Al alloys/metal matrix composites (MMCs) by continuous casting process. The various steps involved in the…
ISSN:
1708-5284Online date, start – end:
2011Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditor:
- Professor YuZhuang Sun