Table of contents
Health and Safety in Soft Soldering
D. CourtneyThe health and safety of those involved to some degree in soft soldering can be subject to the effects of solder, flux, solderable enamels and solvents. The lead content of solder…
Observations on the Growth and Impact of Intermetallic Compounds on Tin‐Coated Substrates
M.E. Warwick, S.J. MuckettTin and solder coatings interact with substrates commonly used in the electronics industry to produce layers of intermetallic compounds at temperatures above and below the melting…
Multilayer Presses, Loading Plant and Handling Equipment
The manufacture of multilayer circuit boards demands a press possessing a number of different characteristics that have a bearing on the accuracy and quality of the finished…
New products
Fry's Metals Ltd. are marketing a new range of soldering fluxes, the Series 900, for use in the soldering of printed circuits by automatic wave, drag or similar soldering methods…
Printed circuits, ‘Quo Vadis’?
‘478’; that is the latest figure for established Printed Circuit manufacturers in the UK with an estimated work force of some 16,000. Again from an output of about £30 million in…
ICT News
The Annual General Meeting was held on Wednesday, 8th June at Brunei University Uxbridge as planned, being attended by some 40 members. This year no Brunei symposium had been…
Outgassing of Solder Joints: ‘Causes and Cures?’
S. Jones, P. StarkeyFinancial and commercial pressures have led to the increasing trend for PCB users to want to reduce or eliminate rework after mass soldering. Whilst the phenomenon of outgassing…
ISSN:
0305-6120e-ISSN:
1758-602XISSN-L:
0305-6120Online date, start – end:
1974Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditor:
- Associate Professor Pooya Davari