Citation
(2006), "2005 Awards for Excellence", Microelectronics International, Vol. 23 No. 3. https://doi.org/10.1108/mi.2006.21823caa.001
Publisher
:Emerald Group Publishing Limited
Copyright © 2006, Emerald Group Publishing Limited
2005 Awards for Excellence
The following article was selected for this year's Outstanding Paper Award for Microelectronics International
“Delamination and solder flow-out in underfilled and Pb-free flip chips on laminate”
Marc van Kleef, Jeroen Bielen and Jan GülpenMobile Communications, Nijmegen, The NetherlandsandMike RamosAssembly and Test Organization – Innovation, Cabuyao, Philippines
Purpose – In land grid array hybrid or system in package type products passive integration on silicon dies are flip chip mounted on a laminate substrate using Pb-free solder. To increase the solder bump fatigue life, underfill is applied. The application of underfill resulted in the occurrence of an unexpected and unwanted phenomenon: solder flowing out of the underfill during a second level reflow test. The occurrence of solder flow-out seemed associated with moisturizing as part of a moisture sensitivity level assessment. The solder flow-out is preceded by delamination, initiated by mismatch in coefficient of thermal expansion between copper through-holes and laminate. This paper aims to describe the phenomenon and possible solutions by combining experiments with finite element (FE) simulations.Design/methodology/approach – Ways to prevent this kind of overstress failures are investigated by design of experiments and observed trends are compared with thermo-mechanical FE simulations. A significant contribution is made by through-holes close to the bump and underfill fillet.Findings – The FE simulations confirmed increased thermo-mechanical induced stress levels by bad positioning of vias, underfill and solder. The integrity of the flip chip construction is substantially improved by optimising product design, underfill material and the associated assembly process.Originality/value – This paper is a useful source of information on the causes of delamination and solder flow-out.
Keywords: Laminates, Moisture measurement, Solder
www.emeraldinsight.com/10.1108/13565360510593710
This article originally appeared in Volume 22 Number 2, 2005, pp. 28-34, of Microelectronics International, Editor: John Atkinson