Numerical study of heat transfer performance in a pipe partially filled with non-uniform porous media under LTNE condition

Abstract

Purpose

The purpose of this paper is to numerically investigate the heat transfer enhancement in a tube filled partially with porous media under non-uniform porosity distribution and thermal dispersion effects. The optimum porous thickness ratio [R_(r,Nu)] for the heat transfer enhancement under these conditions with and without considering required pumping power is evaluated.

Design/methodology/approach

The local thermal non-equilibrium and Darcy–Brinkman–Forchheimer models are used to simulated thermal and flow fields in porous region. The tube wall and flow regime are assumed to be isothermal and laminar, respectively. The impacts of Darcy number (Da = 10^-6 - 10^-1) and inertia parameter (F = 0 − 2) on the Nusselt number and friction factor are studied for non-uniform porosity distribution.

Findings

First, the effect of Nusselt number indicates that there are two different behaviors with respect to uniform and non-uniform porosity for partially and fully filled porous pipe. Second, variable porosity in porous region has significant influence on the optimum thickness ratio with considering required pumping power. For negligible inertia term, it depends on the Darcy number, whereas it is 0.9 at F > 1. Third, the plug flow assumption cannot be valid even at lower Darcy number under non-uniform porosity, while this assumption is applicable at Da < 10^-3 for constant porosity distribution in porous region.

Originality/value

According to the best knowledge of authors, the optimum porous thickness ratio for the heat transfer enhancement considering the pressure loss effects under variable porosity has not reported up to now. Also the plug flow assumption in such physics is not discussed.

Citation

Saberinejad, H., Keshavarz, A., Payandehdoost, M., Azmoodeh, M.R. and Batooei, A. (2018), "Numerical study of heat transfer performance in a pipe partially filled with non-uniform porous media under LTNE condition", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 28 No. 8, pp. 1845-1865. https://doi.org/10.1108/HFF-12-2017-0495